Manual Dimplex OCR1500 (page 4 of 24) (English, German, Dutch, French, Italian, Polish, Norwegian)

798104

Zoom out

Zoom in

1/24

ELECTRICAL CONNECTION

WARNING THIS APPLIANCE MUST BE EARTHED

Assembly and Positioning

FITTING THE CASTORS

WARNING The radiator must only be operated

with the wheels and castors tted and in the

upright position.

The castors must be tted to the control panel and between the

last and second last n on the opposite end, as shown in Fig.1.

To t the castors, turn the radiator upside down on a carpet or

other soft surface to avoid damage.

WARNING The radiator is heavy – ensure that

it is supported to prevent it from toppling. Ask

a second person to help with this if necessary.

Locate the wire clamp (A) and remove the winged nut (C).

Insert the non threaded end of the wire clamp into one of the

holes in the castor plate (B) as shown. Feed the threaded end

of the wire clamp between the last and second last column ns

ensuring the wire clamp wraps around the column body (sump).

some manipulation of the plate and clamp will be required. The

threaded end should then be passed through the castor plate

and secured using the wing nut.

To t the castor to the control end, position the castor plate in

position and secure using the wing bolts (D). there are guides to

ensure the correct positioning and orientation of the caster plate.

Return the radiator to the correct orientation so it rests on the

castors. The product is now ready for use.

POSITIONING THE HEATER

Select the position for the heater ensuring there is clearance

from any furniture and ttings of at least 300mm above the

heater and 150mm each side and 300mm from the control and

end panel. We recommend maximising the clearance where

possible.

Models & General Information

MODELS

Model Description Power

(W)

OCR1500 7 n, thermostat, three heat settings &

Neon 1500

OCR2000 9 n, thermostat, three heat settings &

Neon 2000

OCR2500 11 n, thermostat, three heat settings &

neon 2500

GENERAL

The radiator is designed for operation on an AC electricity

supply, and is suitable for use in domestic dwellings and similar

indoor locations.

The radiator is tted with castors and a handle for ease of

movement. A rotary selector switch provide the ability to

choose an available heat output and an adjustable thermostat

enables the room temperature to be controlled accordingly. It

is supplied with a cord and plug and is ready for use once the

castors have been correctly tted.

Operation

IMPORTANT - OBJECTS OR CLOTHING MUST NOT BE

PLACED ON THIS HEATER.

Before using the heater ensure that all warnings and instructions

have been read carefully.

Once the castors have been tted, to activate the heater

simply plug it in. Neon indicating lights (i, see Fig 2) located at

the controls area will illuminate when the appliance is plugged

into the mains. This indicates the appliance is energised and

ready for use.

CONTROLS

(See Fig.2 &3)

Thermostat (T)

The Thermostat controls the heat output according to the room

temperature. This ensures that the heater will not produce heat

unnecessarily when the room is warm. To set the temperature

you require, turn the thermostat knob clockwise until the

required setting is reached. Alternatively to heat a cold room

quickly, turn the thermostat knob up fully. When the room

has reached the desired temperature, turn the thermostat

knob anti-clockwise until the thermostat just clicks off. The

heater will now automatically operate at this temperature. The

thermostat also has a frost protection setting marked ‘ ‘.

This setting is useful in areas such as garages, to prevent frost

damage. If the thermostat is set to its minimum setting ‘ ’,

the heater will cycle on and off to maintain a temperature of

approximately 5° to help protect against frost.

Note – Should the heater fail to come on when the thermostat

is at a low setting, this may be due to the room temperature

precise quantity of special oil. Repairs requiring

opening of the oil container are only made by

the manufacturer or his service agents.

When scrapping the appliance, the oil must be

disposed of properly! As this is a category 2 oil, it

must be disposed of only at waste oil collecting

points.

DO NOT use the heater on deep pile carpets or

the long hair type of rugs, or less than 750mm

(30”) away from any overhanging surface. Keep

combustible materials such as drapes and other

furnishings clear from the front, sides and rear of

the heater. Do not use heater to dry your laundry.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex OCR1500 in the language / languages: English, German, Dutch, French, Italian, Polish, Norwegian as an attachment in your email.

The manual is 7.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dimplex OCR1500 Manual

Product: