706573
29
Zoom out
Zoom in
Previous page
1/36
Next page
24
Symptom Reason Solution
The ame effect does
not start.
The power plug is not inserted into the wall
socket.
Low water level
Low voltage plug is not connected well
(see Figure 6).
The transductor (mist maker) is not correctly
installed in the receptacle.
Check whether the plug is properly inserted
into the wall socket.
Check whether the water reservoir is full and
whether water is in the receptacle.
Check whether the low voltage plug is
properly connected. (Figure 6)
Check whether the transductor is properly
and entirely in the hole.
The ame effect is too
low.
The control knob of the ame effect is set
too low (see Figure 2).
The metal disk in the transductor may be
dirty (see Figure 12).
The cable of the transductor (mist maker)
runs over the metal disk.
Slowly turn the control knob 'D' clockwise to
increase the ame intensity (see Figure 2).
Clean the metal disk with the supplied soft
brush (see Figure 12 and 'Maintenance' for a
step-by-step procedure).
Place the cable correctly and let it run
outwards via the hole at the back of the
receptacle.
Unpleasant smell
when the re is used
Dirty or stale water
Using unltered tap water
Clean the re as described in 'Maintenance'.
Only use water with a hardness of maximum
10dH or use demineralised or reverse
osmosis water.
The ame effect
produces too much
smoke.
The ame effect is set too high. Turn the control knob 'C' of the ame effect
clockwise (approx. a quarter turn each time).
Give the ame mechanism some time to
respond to the new setting (see Figure 2).
The main lamps do
not work and there
are no ames or
smoke.
No water in the water reservoir Follow the instructions described in
Maintenance 'Filling the water reservoir'.
Check whether the plug is properly inserted
into the wall socket.
Switch 'A' (Figure 2) is in the ON ( I ) posi-
tion.
Troubleshooting
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex Nissum concrete L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex Nissum concrete L in the language / languages: English, German, Dutch, French, Norwegian as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info