520411

Dimplex LI 11TER plus Manual

25
Zoom out
Zoom in
Previous page
1/56
Next page
www.dimplex.de EN-11
English
12
12 Device Information
1 Type and order code LI 11TER+ LI 16TER+
2Design
2.1 Model Reversible Reversible
2.2 Controller Internal Internal
2.3 Thermal energy metering --
2.4 Installation location / degree of protection according to EN 60 529 Indoors / IP 21 Indoors / IP 21
2.5 Performance levels 11
2.6 Frost protection condensate tray / heating water 1
1. The heat circulating pump and the heat pump controller must always be ready for operation.
Heated / yes Heated / yes
3 Operating limits
3.1 Heating water flow / return °C up to 58 ± 2 / from 18 up to 58 ± 2 / from 18
3.2 Cooling water flow °C +7 to +20 +7 to +20
3.3 Air (heating) °C -25 to +35 -25 to +35
3.4 Air (cooling) °C +15 to +40 +15 to +40
4 Performance data / flow rate2
2. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, the bivalence point and
regulation should be taken into consideration. These specifications can only be achieved with clean heat exchangers. Information on the maintenance, start-up and operation can
be found in the respective sections of the installation and operating instructions. The specified values have the following meaning, e.g. A7 / W35: Heat source temperature 7 °C
and heating water flow temperature 35 °C.
4.1 Heating water flow rate / internal pressure differential
Maximum A7 / W55/30 m³/h / Pa 1.9 / 10900 2.6 / 14600
Minimum m³/h / Pa 1.0 / 3000 1.4 / 4500
4.2 Heat output / COP 3
3. At maximum heating water flow rate
EN 14511 EN 14511
at A-7 / W45 kW / --- 6.6 / 2.7 10.5 / 2.9
at A2 / W35 kW / --- 8.8 / 3.1 9.9 / 2.5
at A7 / W35 kW / --- 11.3 / 3.6 14.9 / 3.6
at A7 / W45 kW / --- 9.6 / 3.1 14.7 / 3.3
at A10 / W35 kW / --- 12.1 / 3.9 16.6 / 3.9
4.3 Cooling water flow rate / internal pressure differential
A35 / W12/7 m³/h / Pa 1.3 / 5900 1.8 / 7000
4.4 Cooling capacity / COP
at A27 / W7 kW / --- 8.8 / 2.8 12.5 / 2.6
at A27 / W18 kW / --- 10.8 / 3.2 16.4 / 2.8
at A35 / W7 kW / --- 7.5 / 2.1 10.6 / 2.0
at A35 / W18 kW / --- 9.5 / 2.5 14.3 / 2.2
4.5 Sound power level of device / outdoors according to EN 12102dB(A) 55 / 61 57 / 62
4.6 Sound pressure level at a distance of 1m 4dB(A)
4. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation with a flow temperature of 35°C. The specified sound pressure level
represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
50 52
4.7 Air flow with an external pressure differential of m³/h / Pa 4200 / 0 5200 / 0
5 Dimensions, connections and weight
5.1 Device dimensions without connections5H x W x L cm
5. Please note that additional space is required for pipe connections, operation and maintenance.
1360 x 750 x 880 1570 x 750 x 880
5.2 Device connections for heating system Inch 1 1/4 " external thread 1 1/4 " external thread
5.3 Device connections to additional heat exchanger (waste heat recovery) Inch 1 1/4 " external thread 1 1/4 " external thread
5.4 Weight of the transportable unit(s) incl. packaging kg 222 260
5.5 Refrigerant; total filling weight type / kg R404A / 5.1 R404A / 5.7
5.6 Lubricant; total filling quantity type / litres Polyolester (POE) / 1.5 Polyolester (POE) / 1.9
6 Electrical connection
6.1 Supply voltage / fuse protection 3~/PE 400 V (50Hz) / C16A 3~ / PE 400 V (50Hz) / C20A
6.2 Control voltage / fuse protection 1~ / N / PE 230 V (50Hz) / C13A 1~ / N / PE 230 V (50Hz) / C13A
6.3 Starting current with soft starter A 23 25
6.4 Nominal power consumption at A2 / W35 / max. power consumption2kW 2.86 / 3.9 4.0 / 6.6
6.5 Nominal current at A2 / W35 / cosϕA / --- 5.16 / 0.8 7.2 / 0.8
6.6 Power consumption of compressor protection (per compressor) W 70 70
7 Complies with the European safety regulations 6
6. See CE declaration of conformity
6
8 Additional model features
8.1 Type of defrosting Reverse circulation Reverse circulation
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex LI 11TER plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex LI 11TER plus in the language / languages: English, German, French as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dimplex LI 11TER plus

Dimplex LI 11TER plus Usermanual and installation guide - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info