798431
7
Zoom out
Zoom in
Previous page
1/24
Next page
www.glendimplex.de 452163.66.79-EN · FD 0103 EN-5
LA 60S-TUR English
4 Accessories
4.1 External four-way reversing
valve
The external four-way reversing valve (Y12) enables optimised
heating and cooling operation of the reversible air-to-water
heat pump. Switching the direction of flow ensures an optimal
flow through the heat exchanger in the heat pump in heating
operation as well as in the opposite direction in cooling opera-
tion. The actuator, driven by an electrical motor and required for
automatic switching, is controlled by the heat pump manager.
(Max. permissible switching current 2A).
The external four-way reversing valve with an actuating time of
max. 30 seconds ensures switching of the water flow over the
complete temperature operating range without any mixing
losses.
The installation of the four-way reversing valve, available as an
accessory, is required to reach the heating and cooling capacity
and coefficient of performance (COP) mentioned in the device
information. The specified operating limits are only fulfilled in
combination with this accessory. A detailed installation descrip-
tion can be found in the instructions included with the valve.
NOTE
º
ºººº
For operation of the heat pump with the external four-way
reversing valve, it is essential to set up the hydraulic
connections according to the instructions included with the
valve. These instructions describe the procedure for setting
up the correct hydraulics in more detail. The alternating
direction of flow in the heating and cooling operation is to be
checked as part of commissioning.
The hydraulic circuit diagrams in the attachment show the
basic design.
5 Transport
CAUTION!
!!
When transporting the heat pump, ensure that it is not tilted
more than 45° (in any direction).
Transport to the final installation location should be carried out
with a pallet. The basic device can be transported with a lift
truck or a crane.
The transport eyebolts must be removed after crane transport,
and the openings must be closed using the vent plugs supplied.
After transportation, the transport fastening in the device is to
be removed from both sides of the base.
CAUTION!
!
!
Before start-up, the transport fastening must be removed.
Remove/screw in
transport lock (4x)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex LA60S TUR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex LA60S TUR in the language / languages: English as an attachment in your email.

The manual is 1.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dimplex LA60S TUR

Dimplex LA60S TUR User Manual - German - 24 pages

Dimplex LA60S TUR User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info