798228
35
Zoom out
Zoom in
Previous page
1/84
Next page
www.glendimplex.de 452168.66.05a · FD 0104 EN-11
HPL 9S-TU(R)W - HPL 18S-TU(R)W English
for domestic hot water inches 1“ AG 1“ AG 1“ AG
for circulation pipe inches 3/4“ IG 3/4“ IG 3/4“ IG
for expansion vessel inches 1“ AG/FL 1“ AG/FL 1“ AG/FL
6.12 Anode diameter HWK mm 33 33 33
6.13 Anode length HWK mm 690 690 690
6.14 Anode connection thread HWK inches 1 1/4“ IG 1 1/4“ IG 1 1/4“ IG
6.15 Weight of the transport unit(s)
incl. packaging HWK kg 210 210 210
7 Electrical connection
7.1 Supply voltage / fusing / RCD type 3~/N/PE 400 V (50 Hz) /
C10 A / A
3~/N/PE 400 V (50 Hz) /
C10 A / A
3~/N/PE 400 V (50 Hz) /
C13 A / B
7.2 Control voltage / fusing by WPM 1~/N/PE 230 V (50 Hz) /
4 AT
1~/N/PE 230 V (50 Hz) /
4 AT
1~/N/PE 230 V (50 Hz) /
4 AT
7.3 Degree of protection according to EN 60529 IP 24 IP 24 IP 24
7.4 Starting current limiter Soft starter Soft starter Soft starter
7.5 Rotary field monitoring Yes Yes Yes
7.6 Starting current with soft starter A 21 19 21
7.7 Nominal power consumption A2/W35/ max. power consumption 4 kW 1.7 / 3.3 2.38 / 4.0 3.24 / 6.8
7.8 Nominal current A2 /W35 / cos  A / --- 3.1 / 0.8 4.3 / 0.8 5.9 / 0.8
7.9 Power consumption of compressor protection
(per compressor) W / ---
70 / thermostatically
controlled
70 / thermostatically
controlled
70 / thermostatically
controlled
7.10 Power consumption of fan W up to 100 up to 150 up to 200
7.11 Control voltage, fusing HWK
7.12 Supply voltage / fusing
( P = 3.5 kW) HWK
1~ / N / PE 230V (50Hz) /
B63A
1~ / N / PE 230V (50Hz) /
B63A
1~ / N / PE 230V (50Hz) /
B63A
HWK 3~ / N / PE 400V (50Hz) /
B25A
3~ / N / PE 400V (50Hz) /
B25A
3~ / N / PE 400V (50Hz) /
B25A
Supply voltage / fusing
( P = 3.5 kW) HWK
1~ / N / PE 230V (50Hz) /
B16A
1~ / N / PE 230V (50Hz) /
B16A
1~ / N / PE 230V (50Hz) /
B16A
3~ / N / PE 400V (50Hz) /
B10A
3~ / N / PE 400V (50Hz) /
B10A
3~ / N / PE 400V (50Hz) /
B10A
8 Complies with the European safety regulations 11 11 11
9 Additional model features
9.1 Type of defrosting Reverse circulation Reverse circulation Reverse circulation
9.2 Frost protection, condensate tray /
Water in device protected against freezing12 Yes Yes Yes
9.3 Maximum operating pressure (heat sink) bar 3.0 3.0 3.0
9.4 Energy efficiency class / energy efficiency (low temperature) A++ / 177 % A++ / 173 % A++ / 168 %
9.5 Energy efficiency class / energy efficiency (mean temperature) A++ / 127 % A++ / 128 % A++ / 133 %
10 Heat output COP 4
10.1 Heat output / COP EN 14511 EN 14511 EN 14511
Performance level 121212
at A-7 / W35 kW / --- 5.5 / 3.3 --- 7.2 / 3.2 --- 5.6 / 3.3 10.5 / 3.2
at A2 / W35 kW / --- 7.2 / 4.3 --- 9.5 /
4.1(4.3)13 --- 7.3 / 4.3 12.3 / 3.9
(4.0)13
at A7 / W35 kW / --- 8.4 / 4.9 --- 11.3 / 4.8 --- 8.4 / 5.0
at A7 / W45 kW / --- 8.2 / 3.8 --- 10.8 / 3.9 --- 8.1 / 3.9
at A7 / W55 kW / --- 8.0 / 3.0 --- 10.0 / 3.1 --- 7.7 / 3.2
at A10 / W35 kW / --- 8.9 / 5.3 --- 12.0 / 5.1 --- 8.8 / 5.4
1. For air temperatures between -22°C and -5°C, flow temperature increasing from 45? t
2. Operation with 2 compressors
3. Operation with 1 comressor
4. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, other parameters, in
particular the defrosting capacity and regulation, should also be taken into consideration. These figures are only achieved with clean heat exchangers. Instructions for care,
commissioning and operation can be found in the relevant sections of the installation and operation instructions. The specified values have the following meaning, e.g. A7/
W35: outside air temperature 7 °C and heating water flow temperature 35 °C.
5. Standard nominal flow only possible with an electronically controlled circulating pump with actuation via heat pump manager.
6. The heat output and COP is reduced by approx. 5 % in lower operation
7. When the optional weather protection hood (accessory) is used. the sound pressure level in outlet direction is reduced by 3 dB(A).
8. The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
9. condition as delivered 6 kw
10.Note that additional space is required for pipe connections, operation and maintenance.
11.See CE declaration of conformity
12.The heat circulating pump and the heat pump manager must always be ready for operation.
13.The coefficient of performance (COP) in partial load operation can be increased by selecting "energy-optimised heating operation" (natural defrosting)
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex HPL 9S-TUW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex HPL 9S-TUW in the language / languages: English, German, French as an attachment in your email.

The manual is 2.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info