Manual Dimplex H260E (page 11 of 44) (English, German, Dutch, French, Italian)

798069

Zoom out

Zoom in

1/44

www.dimplex.de/en 1907/D EN-2

H 260E, H 260E eco English

2. Assembly, installation, minimum clearance

CAUTION!

Do not install the device directly below a wall

socket.

The minimum clearances must be observed.

In addition, a clearance of 750 mm is to be maintained

in front of the unit.

The heating device must be aligned horizontally and

installed on a vertical wall (see illustration).

All dimensions in mm

During assembly, the safety area must be complied

with according to the current installation regulations.

The socket or supply connection socket must be

accessible after installation.

Make sure that the inflow and outflow of air at the

device are unimpeded

NOTE

Installation on wooden walls is permissible.

Wall mounting

CAUTION!

The original wall bracket supplied on the rear

of the device must be used!

NOTE

Look out for electric cables or pipework in the wall

when drilling.

Unlock the wall bracket (A) and remove from the

device.

Drill mounting holes for the wall bracket and insert

the dowels.

Align the wall bracket and firmly screw it onto the

wall.

Hang the device on the wall mount.

Pivot down the heater and push into place (B).

3. Electrical connection

The voltage specified on the type plate must match the

line voltage.

The cable must not be in contact with the casing.

It is recommended that a separate circuit be provided

for the power supply.

Insert the plug in the socket. The plug must always be

accessible in case of emergencies.

The unit must be connected only to an earthed power

outlet.

4. Overload protector

For your safety, the heating device is equipped with an

overload protector. If the air circulation is interrupted

(e.g. due to the air grille being covered or closed), the

device switches off automatically. Err35 is shown on

the display.

In this case, the power supply to the heating device

should be disconnected for a few minutes (disconnect

the plug, switch off the fuse) to allow the device to cool

down sufficiently.

Before recommissioning the device, remove the

reasons for the overload protector being triggered.

5. Cleaning

The device must be disconnected from the mains and

allowed to cool down before cleaning and

maintenance. Clean the outside of the device using a

soft, damp cloth. Do not use scouring powder or

furniture polish as this may damage the surface.

Dust which gathers inside the device can be removed

from the outside using a vacuum cleaner.

2503001000405280

190

308BA

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex H260E in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dimplex H260E Manual

Product: