Manual Dimplex EF12-20TI (page 9 of 28) (English, German, Dutch, French, Italian, Polish)

798178

Zoom out

Zoom in

1/28

www.dimplex.de/en EF12_20_gb · 12/14/B EN-9

English

EF 12/20, EF 12/20 TI, EF 12/20 TID, EF 12/10

2. Technical data

3. Installation

The heater must only be installed and operated on a

vertical wall as shown.

Installation below a wall socket is not permissible.

The device plug must be accessible after installation.

It is not permissible to install the device in protection

zones as defined in the relevant standards.

In addition, a minimum clearance of 750 mm between

inflammable objects e.g. curtains, towels or heat-sensi-

tive plastics, and the front of the unit must be main-

tained.

The device is mounted to the wall with 3 screws. The

enclosed plastic bag contains screws and dowels.

Observe the minimum clearances! Dimensions in mm.

3.1 Mounting Instruction

Unlock the wall bracket (A) and remove from the

device.

Drill mounting holes for the wall bracket and insert

the dowels.

Align the wall bracket and firmly screw it onto the

wall.

Hang the device on the wall mount.

Pivot down the heater and push into place (B).

4. Electrical Connection

The voltage marked on the type plate must correspond to the

supply voltage (A.C supply only).

5. Heating operation

5.1 All Models

The room temperature is

regulated using the adjust-

able thermostat (A). If the

rotary knob is set to the

lowest setting i.e. to the ex-

treme left (see figure), the

thermostat switches the

heater on at an ambient

temperature of approx. 5°C.

ATTENTION!

Rooms can become overheated if left unattended

whilst being heated; this depends on the size of the

room, its heating requirements and the setting of the

thermostat. Persons who are not able to vacate the

room if the temperature becomes too high can thus be

placed in danger.

5.2 EF 12/20 TI - Models with 60-minute timer

Turn the timer knob (B) in a clockwise direction. Set the

desired time period (up to 60 minutes).

During the time set, the de-

vice runs at its full output of

2000 W. The thermostat is

deactivated. When the set

time has expired, the de-

vice switches to a lower

(1000 W) heating level,

which is controlled by the

thermostat.

The set time can be changed or reversed at any time

using the timer knob (B).

Heat output EF 12/20, TI, TID: 2000 W

EF 12/10: 1000 W

Supply voltage 1/N/PE~, 230 V, 50 Hz

Degree of protection IP24

Safety class I (with protective conductor)

Dimensions (W x H x D) 300 x 405 x 120 mm

Weight 3,25 kg

250 300

250

405

280

190

308

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex EF12-20TI in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dimplex EF12-20TI Manual

Product: