798108

Dimplex DXW 307 Manual

3
Zoom out
Zoom in
Previous page
1/20
Next page
357
MIN
230
450 MIN
577
230
MIN 230
MIN
Instructions for Installation and Use
DXW 307 – DXW 330 Convector Heater
07/10/D
1. Important Information
Please read carefully all the information provided in these
instructions. Keep the instructions in a safe place and if
necessary give them to any future owner.
- The device may only be installed by an authorized and
qualified technician.
-
The unit may only be used for space heating in en-
closed rooms.
-
Any examination of the heater or repair work may only
be carried out by a qualified electrician.
-
Disconnect the heater from the power supply if it is
faulty or is not used for a long time. Disconnect or un-
screw fuse.
-
Do not cover the heater in any way (risk of fire).
-
Warning: Outer surfaces become hot when heater is
switched on.
-
Do not leave heater unattended when small children
are present.
-
Do not insert any objects into the openings.
-
Do not use the heater in rooms containing flammable
materials (e.g. solvents, etc.).
-
Do not place the connecting lead on top of the appli-
ance.
-
Warning: If the heater is switched on automatically (by
the thermostat), there is a danger of fire if it has been
in any way covered or blocked.
2. Positioning, Installation, Minimum Clearances
When installed, the heater must be aligned horizontally on a
vertical wall, as shown in the illustration.
The minimum clearances shown below must be complied
with.
In addition, a minimum distance of at least 500 mm must be
maintained in front of the heater.
The heater must not be located directly beneath a wall
socket outlet.
Do not install the heater where the controls can be reached
by a person bathing or showering.
Caution: Do not place near flammable objects.
Ensure that air can enter and leave the heater freely, at the
inlets below and the outlets above.
Wall Mounting
IMPORTANT-
The original wall brackets supplied attached to the rear of
the unit must be used.
- Drill mounting holes for the wall brackets.
-
Screw the brackets securely to the wall.
-
Hang the heater from the wall brackets using the slits in
its rear wall.
-
Secure the heater at the top on the wall brackets.
3. Electrical Connection
The heater lead must be connected to a suitable socket.
If the connecting lead is damaged, it must be replaced; a
special new lead can be obtained from the manufacturer or
from after-sales service.
4. Heater Operation
All switch functions are explained below.
On/Off
Output 50%, 100%
(DXW 315 – DXW 330)
Thermostat
The heater is equipped with a thermostat, by means of
which the desired room temperature can be set.
The setting * represents a room temperature of about 6°C
(protection against freezing).
Turning the thermostat knob to the right (clockwise) in-
creases the temperature setting, while turning to the left
(anticlockwise) reduces the desired temperature.
I
II
O
I
GB
3
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex DXW 307 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex DXW 307 in the language / languages: English, German, French, Polish, Turkish as an attachment in your email.

The manual is 0.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info