798067
10
Zoom out
Zoom in
Previous page
1/55
Next page
EN-10 2204/A www.dimplex.eu
English DX 512E, DX 520E, DX 530E
5. Controller description
5.1. Control unit
The heating device is equipped with a configurable
electronic controller, consisting of a display, a red LED
and five buttons.
The control unit is located on the right side panel.
The set functions and values are shown on the display.
The LED lights up red when the heating is ON.
5.2. Button functions
MODE
Automatic mode (week program)
Manual operation ON
Manual operation OFF
ENTER
Save entry.
PROG
Week program, set clock.
+/- buttons
Used to navigate through the menu and to change the
setting values.
5.3. Commissioning
5.3.1. Setting the time and day
The time and day are set with the following steps:
Press and hold the PROG key for three seconds.
The clock symbol appears. The hours display
flashes.
Use the + / - buttons to set the hours. Press the
ENTER button. The minutes display flashes.
Use the + / - buttons to set the minutes. Press the
ENTER button. The day flashes.
Use the + / - buttons to set the day. Press the
ENTER button. The CLOCK symbol disappears.
Setting is complete.
5.4. Operation
5.4.1. Selecting the operating mode
Pressing the MODE key switches the operating mode
between MANUAL ON, MANUAL OFF and AUTO.
MANUAL ON
Manual heating operation switched on.
Display alternates between room temperature
setting and the current time.
Room temperature is set using +/-.
MANUAL OFF
Heating operation switched off.
The current time is displayed.
Room temperature cannot be set.
NOTE
i
In MANUAL OFF operating mode, frost protection
takes place. If the room temperature is 5° C or less,
the heating device is switched on automatically.
AUTO
Automatic mode (week program) activated.
Display alternates between room temperature
setting and the current time.
Heating operation takes place in the specified
time blocks for ON and OFF.
Room temperature is set using +/-.
There are no factory default time blocks. These must
be defined by the user as required.
NOTE
i
Frost protection is the factory default in the OFF time
blocks. If the room temperature is 5° C or less, the
heating device is switched on automatically.
F
COPY
BLK
OFF
ON
P
DLY
AUTO
ADVANCE
MANUAL
ON
M
T
W
T
S
S
OFF
Save entry
Set program
Select operating mode
Automatic operation
Copy
Time block on
F
COPY
OFF
ON
P
AUTO
ADVANCE
MANUAL
ON
M
T
W
T
S
S
OFF
Manual operation
Setting the time
Button lock
Program no. (1 - 4)
Day
Heating operation off
Heating operation on
Advance
Time block off
Value down/up
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex DX520E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex DX520E in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 6.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info