798066
13
Zoom out
Zoom in
Previous page
1/55
Next page
www.dimplex.eu 2204/A EN-13
DX 512E, DX 520E, DX 530E English
6. Overload protector
For your safety, the heating device is equipped with
an overload protector. If the air circulation is inter-
rupted (e.g. due to the air grille being covered or
closed), the device switches off automatically.
In this case, the power supply to the heating device
should be disconnected for a few minutes (switch off
the fuse) to allow the device to cool down sufficiently.
Before recommissioning the device, resolve the rea-
sons for the overload protector being triggered.
7. Maintenance
The device must be disconnected from the mains and
allowed to cool down before maintenance.
Clean the outside of the device using a soft, damp
cloth. Do not use scouring powder or furniture polish as
this may damage the surface.
Dust which gathers inside the device can be removed
from the outside using a vacuum cleaner.
8. Faults
If the heating device is not emitting any heat, check
the following points:
Has the heating level been selected?
Has the controller been set to the desired temper-
ature?
Has the overload protector been triggered? See
chapter 5.
Has the fuse in the switch box tripped?
If you cannot remedy the fault, please contact your
electrical retailer. The retailer will require the product
number (E no.) and the production date (FD) of the de-
vice. This information is listed on the type plate.
9. Warranty
This product is supplied with a two-year warranty ac-
cording to our terms of guarantee.
10. Recycling
Do not dispose of the device with general
household waste. Take the device to the
available collection points at the end of its
service life.
11. Technical data
Order code Unit DX 512E DX 520E DX 530E
Connection voltage 1/N/PE 230-240 V ~ 50 Hz
Power consumption kW 1.2 2.0 3.0
Protection class I, with protective conductor
Degree of protection IP20
Heating levels kW 0.8 / 1.2 1.2 / 2.0 2.0 / 3.0
Heat output
Nominal heat output Pnom kW 1.2 2.0 3.0
Minimum heat output (guide value) Pmin kW 0.8 1.2 2.0
Maximum continuous heat output Pmax,c kW 1.2 2.0 3.0
Additional power consumption
At nominal heat output Elmax W 0.5 0.5 0.5
At minimum heat output Elmin W 0.5 0.5 0.5
In standby mode elSB W 0.5 0.5 0.5
Type of heat output/room temperature control
Electronic room temperature controller with week
program and adaptive control of start of heating °C 5 - 30
Dimensions width x height x depth
(with / without wall bracket) mm 585 x 383 x 123 / 104 710 x 383 x 123 /
104
Weight kg 3.8 3.8 4.5
Glen Dimplex Deutschland GmbH Phone: +49 9221 709 700
Am Goldenen Feld 18 Fax: +49 9221 709 701
95326 Kulmbach, Germany E-mail: elektroheizung@dimplex.de
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex DX512E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex DX512E in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 6.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info