Manual Dimplex Chopin (page 4 of 29) (English, German, Dutch, French, Italian, Polish, Swedish, Spanish, Norwegian)

706447

Zoom out

Zoom in

1/29

Controls: See Fig. 2 & 4

Icon Display Function Description

A -

Power /

Standby

Press Once to turn the product ‘ON’.

Press a second time to put the product into ‘STANDBY’

(When returning from ‘STANDBY’ mode the product will return to previous settings unless

the product has been plugged out, in which case it will reset to factory settings)

Sleep

Timer

Press multiple times to change the ‘SLEEP TIMER’ in 0.5 hr increments from 0.5

hr to 8.0 hr before turning off. The remaining time on the ‘SLEEP TIMER’ displays.

(This icon is Green in Colour)

Flame Effect

‘FLAME EFFECT’ button cycles the unit sequentially through the 4 setting, LOW FLAME,

HIGH FLAME, DEMO MODE and OFF.

Low

Flame

This setting will run the ame effect at a low brighness level. (The display will show F1)

High

Flame

This setting will run the ame effect at a high brighness level. (The display will show F2)

Demo

Mode

This setting will slowly pulse the ame effect between low and high brightness. (The display

will show FP)

Off

This will turn the ame effect off. If the heater is running, the display will activate and

remain active to read the set temperature and show if the product is on LOW HEAT/ HIGH

HEAT/COOL BLOW.

Heat

‘HEAT’ button cycles the unit sequentially through the 4 settings: LOW HEAT, HIGH HEAT,

COOL BLOW and OFF. The heat setting will be indicated by an icon in the oating display

see Fig.1.

When the ame effect is ‘ON’ the oating display will turn off after 5 seconds, however

if the heater is being used independantly of the ame effect. The low heat or high heat

icon will appear continuously in the oating display.

Low

Heat

This setting will run the heater at ‘LOW HEAT’ this setting will be indicated by the ‘LOW

HEAT’ icon and the letters ‘LO’ appearing in the display.

(This icon is Orange in Colour)

High

Heat

This icon in the oating display indicates ‘HIGH HEAT’ this setting will be indicated by the

‘HIGH HEAT’ icon and the letters ‘HI’ appearing in the display.

(This icon is Red in Colour)

Cool

Blow

This icon in the oating display indicates ‘COOL BLOW’ this setting will be indicated by

the ‘COOL BLOW’ icon and the letters ‘CB’ appearing in the display.

(This icon is Blue in Colour)

- Off

This switches the heater and blower ‘OFF’, no icon will be displayed in the oating display.

Note the blower will run for 10-20 seconds after being turned off this is to ensure the product

cools down safely.

E -

Temp

Down

Press multiple times to lower the heater temperature in 1

C increments. The lowest

temperature that can be set 5

Note: Once you stop at your desired temperature this will flash 3 times, then the display

will show the room temperature as detected by the product. If the set temperature is

lower than the detected room temperature the heater will not activate.

F -

Temp

Press multiple times to increase the heater temperature in 1

C increments. The highest

temperature that can be set 37

Note: Once you stop at your desired temperature this will flash 3 times, then the display

will show the room temperature as detected by the product. If the set temperature is

lower than the detected room temperature the heater will not activate.

User Modes:

Mode Name /Discription Action (Actions cannot be input by remote control)

Change Celsius (

C) to Fahrenheit (

Press both Temp+ ( ) and Temp– ( ) on the unit and hold until beep is

heard and display flashes. (To revert back to Celsius repeat this action)

Disable Heat Options

Hold both Heat ( ) and Temp– ( ), on the unit, for 2 seconds, when the

heater has been disabled the display will read “--” and beep.

Enable Heat Options

Hold both Heat ( ) and Temp– ( ), on the unit, for 2 seconds. When the

heater has been sucessfully enabled the heater will beep and the show the

set temperature.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex Chopin in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 7,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dimplex Chopin Manual

Product: