706302
5
Zoom out
Zoom in
Previous page
1/36
Next page
according to the steps 1-6 or activate the already entered program by
leaving this menu with the button.
8. In order to continuously run the entered program the cursor must be
positioned under the PROG symbol. The heater will operate according
to the entered information. When a program is running, the program
number will appear with the pre-set and ambient temperatures
alternating.
9. An entered program can be checked, edited or deleted just by navigating
into the PROG menu and pressing the enter button. With the
buttons the different program numbers can be selected. When a program
number is selected (flashing) the start/stop time will alternate according
to any pre-entered information. To delete one program number, press
the button. The CP symbol (clear program) appears and by pressing
the enter button this program will be deleted. leaves the
menu without deleting the program.
Time setting (TIME) - see Fig. 9.
Navigate the cursor to TIME with the buttons. Press the enter button
to adjust the weekday with the buttons. Confirm with the enter
button and set the hours and minutes with . Press the enter button
or to leave the time menu.
Frost protection - see Fig. 4.
Choose a heat setting and set the desired ambient temperature between
5°C and 8°C (see ‘Operation’).
When the temperature falls below +5 °C…+8 °C, the heater switches on
automatically.
Recycling
For electrical products sold within the European
Community.
At the end of the electrical products useful life it should not
be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer
for recycling advice in your country.
UK
- 2 -
Cleaning
WARNING : ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE
CLEANING THE HEATER
Do not use detergents, abrasive cleaning powders or polish of any kind on
the Controller.
Wipe with a dry cloth to remove dust and a damp cloth (not wet) to clean off
stains. Be careful not to allow moisture into the Controller.
Use a vacuum cleaner to remove any fluff which accumulates on top of the
Controller.
Care must be taken to avoid any moisture ingress into the product.
After Sales Service
Should you require after sales service or should you need to purchase any
spares, please contact the retailer from whom the heater was purchased or
contact the service number relevant to your country on the warranty card.
Please do not return a faulty product to us in the first instance as this may
result in loss or damage and delay in providing you with a satisfactory
service.
Please retain your receipt as proof of purchase.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex CFCH Electronic Control Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex CFCH Electronic Control Panel in the language / languages: All languages as an attachment in your email.

The manual is 6,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info