706336
16
Zoom out
Zoom in
Previous page
1/56
Next page
8
Symptom Cause Corrective Action
Product will not oper-
ate.
Electrical connection issue
Low water reading
Ensure product has working electrical con-
nection.
Rell the water tank(s) of the product. See
“Low Water / Relling the Water Tanks”
above.
Product will not oper-
ate. The LED fuel bed
only operates.
Low water reading
Product is not level
Rell the water tank(s) of the product. See
“Low Water / Relling the Water Tanks”
above.
Ensure the product is level by checking the
on-board level (Fig 8).
LEDs blink twice and
product beeps twice
Product is approaching low water Rell the water tank(s) of the product. See
“Low Water / Relling the Water Tanks”
above.
Little or No Mist Gen-
eration
Transducer not operating correctly
Transducer is dirty
Transducer is not sitting correctly in sump
Fan is obstructed or blocked
Nozzle is not on sump correctly
Nozzle is blocked
Check operation of transducer
Clean sump and transducer thoroughly
Switch off product, take nozzle off sump and
ensure transducer is tted in sump correctly
Remove air lter and clean. Ensure it is
placed back in product correctly.
Ensure Nozzle is sitting on sump correctly
Clean sump, transducer and nozzle thor-
oughly
The ame effect has
too much smoke.
Flame effect setting is too high Turn down the ame effect. Give the product
time to adjust to the new setting
Bluetooth Receiver
stops working
Loose connection Check connection to jack (Fig 12)
Remote Control stops
working
Bluetooth range issue
Bluetooth Receiver connection is loose
Remote control batteries need replacing
Check positioning of Bluetooth Receiver. En-
sure it is not encased in metal or concrete.
Check connection to jack (Fig 12)
Replace batteries with two new AAA batteries
Troubleshooting
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex CAS 500R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex CAS 500R in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 10,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info