798040

Dimplex Cadiz ROF3ECC Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
Model Description Watts
ROF2T Standard Model Switch & Thermostat Control 2000
ROF2TI Switch, Thermostat & Mechanical Timer Control 2000
ROF2ETI Switch, Thermostat & Electronic Timer Control 2000
ROF2ECC Electronic Climate Control 2000
ROF3ECC Electronic Climate Control 3000
Important Safety Advice
If the appliance is damaged, check immediately with the
supplier before installation and operation.
Warning – This appliance must not be used in a bathroom.
Warning – Do not use this heater in the immediate
surroundings of a bath, a shower or a swimming pool.
Warning – This heater must not be located immediately
below a fixed socket outlet.
Warning – Do not use in areas where petrol, paint or
flammable liquids are used or stored.
Follow these instructions carefully.
The heater carries a warning ‘Do Not Cover’ to alert the
user to the risk of fire that exists if the heater is
accidentally covered.
The appliance is not intended for use by children or other
persons without assistance or supervision if their
physical, sensory or mental capabilities prevent them
from using it safely. Children should be supervised to
ensure that they do not play with the appliance.
Do not put objects through the openings of the appliance.
This could lead to functional faults, possibly to the ignition
of the object.
If the mains lead is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
Unplug the heater when not required for long periods.
Do not use the heater if it develops a leak. Unplug the
heater and contact your supplier or the manufacturers
Service Agent.
The heater carries the Warning symbol indicating
that it must not be covered.
General
The radiator is designed for operation on an AC electricity supply, and
is suitable for use in domestic dwellings and similar indoor locations.
Always ensure that the appliance is stood on a firm, level base near to,
but not directly beneath, a suitable fixed socket outlet.
The radiator is fitted with wheels, castors and a handle for ease of
movement. Selector switches provide a choice of heat output and an
adjustable thermostat enables the room temperature to be controlled
accordingly. It is supplied with a cord and plug ready for use.
The supply cord should be uncoiled before use (see ‘Storage’).
DO NOT pull the radiator along by the mains lead.
Important - The radiator must only be operated with the wheels and
castors fitted and in the upright position as shown in Fig. 1.
Warning – The heater complies with stringent safety standards but to
ensure efficient operation SURFACES OF THE HEATER WILL BECOME
HOT AND CONTACT WITH THESE AREAS SHOULD BE AVOIDED,
particularly between the air outlet slots on the top and sides.
The control panel area is designed to be at a far lower temperature to
allow the safe operation of the controls at any time.
Momentary contact with any part of the heater should not cause injury.
However aged, infirm persons or young children should not be left
unsupervised in the vicinity of the heater.
Please Note – We recommend that you open a window to ventilate the
room when using the heater for the first time.
Electrical
WARNING – THIS APPLIANCE MUST BE EARTHED
If the socket outlets in your home are not of the 13 amp BS1363 type
they will not accept the plug connected to this heater, therefore cut off
the plug. When cut off this plug can constitute a shock hazard if
inserted into a socket outlet. It must therefore be disposed of safely.
Before wiring the appropriate plug please note that the wires in this
mains lead are coloured in accordance with the following code:
GREEN/YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
Connect the Green/Yellow wire to the terminal marked E or the earth
symbol or coloured Green or Green/Yellow.
Connect the Brown wire to the terminal marked L or coloured Red.
Connect the Blue wire to the terminal marked N or coloured Black. DO
NOT connect the Brown (Live) or the Blue (Neutral) wires to the Earth
terminal of your 13 amp plug. If the terminals of the plug are unmarked
or you are in any doubt, consult a qualified electrician.
CAUTION: If you use this heater in conjunction with a thermal control,
programme controller, timer or any other device which switches the
heater on automatically observe all safety warnings at all times.
Positioning the Heater
Select the position for the radiator ensuring there is clearance from any
furniture and fittings of at least 300mm above the heater and 150mm
each side. The radiator should only be operated on a flat stable surface.
Operation
Important – Objects or clothing must not be placed on this heater. Before
using the heater ensure that all warnings and instructions have been
read carefully.
To bring the heater into use plug it in. Neon indicating lights located at
the controls area will glow when the appliance is actually heating.
Controls
Thermostat (ROF2T, ROF2TI & ROF2ETI models only)
The Thermostat (see ‘T’ in Fig.’s 2, 3 & 4) controls the heat output
according to the room temperature. This ensures that the heater will not
produce heat unnecessarily when the room is warm. To set the
temperature you require, turn the thermostat knob clockwise until the
required setting is reached. Alternatively to heat a cold room quickly,
turn the thermostat knob up fully. When the room has reached the desired
temperature, turn the thermostat knob anti-clockwise until the thermostat
just clicks off. The heater will now automatically operate at this
temperature. The thermostat also has a frost protection setting marked
‘‘. This setting is useful in areas such as garages, to prevent frost
damage. If the thermostat is set to its minimum setting ‘ ’, the heater
will cycle on and off to maintain a temperature of approximately 5° to
help protect against frost.
Note – Should the heater fail to come on when the thermostat is at a
low setting, this may be due to the room temperature being higher than
the thermostat setting.
Heat Selector Switches (ROF2T, ROF2TI & ROF2ETI models
only)
Selector switches located on the control panel provide a choice of low
heat, high heat or boost heat output to suit varying conditions and for
economy of operation.
Low Heat Setting ‘ ’ - This switch as shown in Fig.’s 2, 3 & 4 provides
a low heat output when activated. When it is activated a neon light ‘x’
illuminates below the control button.
High Heat Setting ‘ ’ - This switch as shown in Fig.’s 2, 3 & 4 provides
a high heat output when activated. When it is activated a neon light ‘x’
illuminates below the control button.
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Dimplex Oil filled Covered Radiators
Models : ROF2T, ROF2TI, ROF2ETI, ROF2ECC and ROF3ECC
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex Cadiz ROF3ECC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex Cadiz ROF3ECC in the language / languages: English as an attachment in your email.

The manual is 5.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dimplex Cadiz ROF3ECC

Dimplex Cadiz ROF3ECC User Manual - Dutch - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info