534683
65
Zoom out
Zoom in
Previous page
1/68
Next page
Dimension BST 1200 / SST 1200 User Guide
Troubleshooting 65
NOTE
Move only one idler wheel assembly at a time. Finish
cleaning around the moved wheel and restore it to its normal
position before moving the other idler wheel. Having both
wheels out of position simultaneously could stretch the
spring.
i. Using a 7/64 T-handled hex driver (from Start-Up Kit)
to leverage against the lower idler wheel shaft, push
the idler assembly away from the filament drive gear
by pushing against the spring tension.
NOTE
When moving the idler wheel assembly, you can obtain
maximum clearance for cleaning if you also move the
Tip Toggle Bar so that it is extended to the same side of
the head assembly as the one on which you are working.
It is not necessary to keep Toggle Bar in a neutral
position.
ii. Insert 1/8 T-handled hex driver (from Start-Up Kit) into
the fixturing hole.
iii. Ease pressure on the 7/64 T-handle driver to carefully
return the leveraged idler wheel back toward its
original position - until the idler assembly is resting
against the 1/8 T-handled hex driver.
iv. Remove the 7/64 T-handled driver used to leverage
the idler assembly.
v. Clean the area that is now accessible. Remove the 1/8
T-handle hex driver when complete.
5. Remove excess material from the top of the liquefier.
Use needle nose pliers to carefully grip and remove excess
material from the top of the liquefier.
CAUTION
Liquefier Tubes are fragile. When
removing excess material from the top of
the liquefier be careful not to damage the
tube.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimension SST 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimension SST 1200 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info