514390
71
Zoom out
Zoom in
Previous page
1/74
Next page
71
If you experience a problem with the iPB-10 hardware, you can try performing the factory hard reset procedure listed below.
iPad Connected
1. Turn o the power to the iPB-10 processor by pressing the Power Switch on the back panel.
2. Press and hold
Footswitch A then power on the iPB-10 – keep Footswitch A held down unl you see ‘Fr’ in the LED
display, then release.
3. Press and hold
Footswitch A again unl the display reads ‘rS, then release.
4. Wait for the processor to go through its sequence. When the reset is complete, the iPad will resync all presets with the
iPB-10 hardware.
5. Once preset sync is complete, the iPB-10 Expression Pedal will need calibraon. Follow the
On-Screen Instrucons
to calibrate the Expression Pedal.
iPad Disconnected
1. Turn o the power to the iPB-10 processor by pressing the Power Switch on the back panel.
2. Press and hold
Footswitch A then power on the iPB-10 – keep Footswitch A held down unl you see ‘Fr’ in the LED
display, then release.
3. Press and hold
Footswitch A again unl the display reads ‘rS, then release.
4. Aer a few moments, ‘Td’ will appear in the display and the Footswitch 5 LED will begin ashing. Rock the
Expression Pedal completely forward (toe down) then press Footswitch 5.
5. When ‘tU’ appears in the display, rock the
Expression Pedal completely back (toe up) and press Footswitch 5.
6. A numeric value will now appear in the LED display indicang the Expression Pedal V-Switch sensivity. Press rmly on
the
Expression Pedal Toe. Use the Bank Up and Bank Down Footswitches to ne tune the V-Switch sensivity.
7. Press
Footswitch 5 to complete the procedure.
8. Once the iPad is reconnected, it will sync and reassign all factory tones back to the iPB-10 footswitches.
Factory Hard ResetFactory Hard Reset
WARNING! Performing the factory hard reset procedure will restore the iPB-10 tones to their
factory state. Aer performing a factory hard reset, you can connect the iPad and launch the
iPB-Nexus app to restore your previous sengs.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Digitech iPB-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Digitech iPB-10 in the language / languages: English as an attachment in your email.

The manual is 16,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info