499291
12
Zoom out
Zoom in
Previous page
1/52
Next page
12Installation Guide
GB
You can also find the right Channel Editor for you via our Web site.
You can then edit the Channel Lists on the receiver using your computer. For more
information, visit us online at www.digitalbox.de
The receiver is linked to your satellite antenna through a coaxial cable. Before you can
connect the receiver, you must obtain a coaxial cable if you do not already have one
The coaxial cable does not come with the receiver.
Warning!!
Do not connect the receiver to the mains until you have properly connected it to all
other equipment and to the antenna. Doing so may damage the receiver.
Warning!!
Disconnection from the mains: Disconnection from the mains: The standby button on
this device does not fully disconnect the device from the mains. In standby mode, the
device continues to draw power. The only way to fully disconnect the device from the
mains is to unplug it from the wall socket. The wire mesh and the inner conductor of the
coaxial cable conduct electricity during service.
Danger!
Do not connect the receiver to the mains until you have properly connected it to all
other equipment and to the antenna. Otherwise, you run the risk of electrical shock
resulting in personal injury.
6.1 Installing the LNB cable
(See installation diagram on the following page.)
To fit the F-connector to the coaxial cable, you will need a knife (or ideally, a cable stripper)
and wire cutters.
When stripping the cable, take care not to damage the inner conductor, foil, or wire
braid.
At each end, cut off 8 mm of coaxial cable except for the inner conductor.
Carefully remove 10 mm of the outside insulating layer, exposing the wire braid.
Separate the wire braid and pull it back over the outside insulating layer so that it is
not in contact with the inside conductor.
Cut off the inside insulation with its foil covering, leaving about 2 mm in front of the
wire braid.
5. DESCRIPTION
6. CONNECTING THE RECEIVER
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Digitalbox IMPERIAL HD 2 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Digitalbox IMPERIAL HD 2 plus in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Digitalbox IMPERIAL HD 2 plus

Digitalbox IMPERIAL HD 2 plus User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info