499302
35
Zoom out
Zoom in
Previous page
1/54
Next page
35 DVB-S Receiver
GB
When you select “TV Channel / Radio Channel”(timer setting for channel
change and Wakeup channel / date) then you have further options you need
to set:
Wakeup Channel: Press [OK] to enter the channel list, and select the channel
you want to see with [CH
] press [OK] to confi rm it.
Wakeup Date: Use number buttons to input your wakeup date.
On Time: Use number buttons to input your wakeup time. If date and time are
reached then no matter if the system is in standby mode or in playing mode, it
will automatically switch to the channel you set and start to play.
Duration: Here you can set the time you want to see or play this channel. When
the time is reached, whenever the system is in standby mode or playing a
channel, the system will automatically switch to the channel you select and
play the channel within the duration time you set. The minmum duration unit is
one minute. After the duration time, the system will automatically switch to
Standby mode.
When you select “Message”(reminding message) option in “Timer Service” then
you can enter additional data:
Wakeup Message: Press [Vol ] to select the category
of the wakeup message from Birthday, Anniversary and General.
Wakeup Date: Use the [Number] buttons to input your wakeup date.
On Time: Use the [Number] buttons to input your wakeup time. If date and time
are reached, no matter if the system is in standby mode or in playing mode, it
wil automatically show a reminding message. The message will be displayed on
the screen until you press [Exit] to close it.
Duration: Here you can set the time you want to see or play this channel. When
the time is reached, whenever the system is in standby mode or playing a
channel, the system will automatically switch to the channel you select and play
the channel within the duration time you set. The minmum duration unit is one
minute. After the duration time, the system will automatically switch to Standby
mode.
Press [Exit] to leave the “Timer” menu
2. Local Time Setting: When you select
“Local Time Setting” and press [OK] then
you will see a window like the one beside:
• GMT Usage: This item is used to set
the time by using the time signal from
the satellite. Press [Vol ], to
change the setting.
• The “GMT Offset” item is only available
when “GMT Usage” is set to “On”. Press
[Vol
], to set the “GMT Offset”
value. With every time you press the
button the time offset will be
increased/decreased by half an hour.
5. SYSTEM SETUP
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Digitalbox IMPERIAL DB 2 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Digitalbox IMPERIAL DB 2 USB in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Digitalbox IMPERIAL DB 2 USB

Digitalbox IMPERIAL DB 2 USB User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info