499285

Digitalbox IMPERIAL DB 2 max Manual

100
Zoom out
Zoom in
Previous page
1/108
Next page
9 DVB-S Receiver
GB
2.1 Switch on STB
Switch the [Device’s Main Power] switch on.
When the STB is first used it will display “Quick Setup” window. you will set Language, First
Audio, Second Audio, LNB Power, Antenna Setup and Multi Search.
? Frequently Asked Question
Q: The power of my STB is on and it is running in TV mode but the TV screen shows
nothing:
A: Make sure the TV set has been set to the correct video input (not the TV channels). For
example, if you have connected the unit to the video1 input of the TV set then you need
to select the corresponding input of the TV. Mostly it is done with the AV button of the
TVs remote control unit.
Q: My STB is running in TV mode but the TV screen shows nothing except one ball and
“No Signal”.
A: That means the channel you selected has no signal. This can be caused by several rea-
sons:
1. The channel you selected is not from the satellite to which your dish is pointing. Se-
lect another channel.
2. The signal of current TV channel is too weak. You can try to change to other channels
with a stronger signal. If the problems still exist, please consult your local dealer or
installer for technical service.
3. You selected the wrong LNB type in the installation menu or your DiSEqC switch
configuration is not correct.
2.2 Standby Mode
1. Press [Power] button to switch from TV/radio mode to standby mode
2. In standby mode press [Power] button again to switch back to TV/radio mode. The last
active channel will be showed.
3. To switch off the STB complete press the main power button.
2. BASIC OPERATIONS
… 100 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Digitalbox IMPERIAL DB 2 max at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Digitalbox IMPERIAL DB 2 max in the language / languages: German as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info