499253
10
Zoom out
Zoom in
Previous page
1/41
Next page
English - 9 -
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50 Hz.
Then the standby LED lights up (The led will blink
during the standby On/Off).
To switch the TV on from standby mode either:
Press the
” button, CH or CH or a numeric
button on the remote control.
Press the control switch on the left hand side of the
TV. The TV will then switch on.
Note: If you switch on your TV via CH
or CH
buttons on the remote control or on the TV set,
the programme that you were watching last will be
reselected.
To Switch the TV Off
Press the ” button on the remote control or hold
the on the TV until shut down, so the TV will switch
to standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, the
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active
First Time Installation
IMPORTANT: Ensure that the aerial is connected
and a Common Interface module is not inserted
before switching on the TV for the first time
installation.
When the TV is operated for the rst time, the
installation wizard will guide you through the
process. First, the language selection screen will
be displayed:
Use or buttons to select your language
and press OK button to set the selected language
and continue.
After selecting the language, Welcome!screen will
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
By pressing or button, select the country
you want to set and press button to highlight
Teletext Language option. Use or button
to select desired Teletext Language.
Press
button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You should set the Scan Encrypted as Yes if you
want to scan coded stations.Afterwards select the
desired Teletext Language.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
To select the “Yesor No” option, highlight the item by
using “ ” or “ ” buttons and press OK button.
Afterwards the following OSD will be displayed on
the screen and the TV will search for both digital and
analogue TV broadcasts.
Note: You can press • “MENU” button to cancel.
End of the search process, “Choose Region” osd will
be displayed on the screen (if any multiple region
variants are detected).Please select country and
region choice then press OK to continue.
10


Need help? Post your question in this forum.

Forumrules
1

Forum

digihome-32914lcddvd

Reset search

  • what do i press on my remote control to get to the yellow zoom symbol so i can expand my programme information Submitted on 3-2-2022 at 20:27

    Reply Report abuse
  • I have a digihome tv with a built in DVD player on the side of it. I cannot find the instruction booklet. Is there a booklet I can download please? Submitted on 21-12-2021 at 11:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Digihome 32914LCDDVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Digihome 32914LCDDVD in the language / languages: English as an attachment in your email.

The manual is 7,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info