641111

Diesel JS16 Manual

8
Zoom out
Zoom in
Previous page
1/11
Next page
2
ENGLISH
IMPORTANT TO KNOW!
• When the watch is underwater or wet, never use the pushers/bezels, or set the time. Watch cases
and metal bracelets should be rinsed thoroughly in fresh water after being in salt water.
• No hot tub/sauna. Please do not take your DIESEL watch into the hot tub/sauna. The combination of
extreme heat and water may cause your watch to lose some of its water-resistance.
• No backward hand, or date, adjustments should be made when the analog hands read between 8pm
and 3am. At these times, the gears are too close together and such a change could cause damage.
3
Water Resistance Water-Related Use
Caseback
Marking
Depth
Washing
Hands
Shower,
Bathing
Swimming, Snorkeling Scuba Diving
— —
WR —
3 ATM
3 Bar,
30 Meters
5 ATM
5 Bar,
50 Meters
10 ATM
10 Bar,
100 Meters
20 ATM
20 Bar,
200 Meters
30 ATM
30 Bar,
300 Meters
50 ATM
50 Bar,
500 Meters
Always set the crown in closed position (the normal position).
Tighten screw-lock crown completely.
Resistance to Water
4
Day/Date Watch 2305
DATE SETTING
1. Pull crown out to position 2.
2. Rotate clockwise to set date.
3. Return crown back to position 1.
DAY SETTING
With crown still in position 2, turn counter-clockwise and set
day for previous day.
TIME SETTING
1. Pull crown out to position 3.
2. Rotate counter-clockwise to set time.
3. Return crown to position 1.
2
1
3
DATE
DAY
Date Watch 515.2-3, 2117, 2317, VX42EZ-D
DATE SETTING
1. Pull crown out to position 2.
2. Rotate counter-clockwise to set date.
3. Return crown back to position 1.
TIME SETTING
1. Pull crown out to position 3.
2. Rotate counter-clockwise to set time.
3. Return crown to position 1.
2
1
3
DATE
5
Chronograph JS15, JS16, JS26, JS10
DATE SETTING
1. Pull crown out to position 2.
2. Rotate clockwise to set date.
3. Return crown back to position 1.
TIME SETTING
1. Pull crown out to position 3.
2. Rotate clockwise to set time.
3. Return crown to position 1.
CHRONOGRAPH
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
CHRONOGRAPH ZERO RESET
1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3.
2. Press A to rotate hands clockwise; press B to rotate hands counter-clockwise.
3. Each press of A or B will move the chronograph hands by one increment/decrement.
Press and hold A or B for fast increment/decrement.
4. When both hands are in the zero position, reset time and return crown to position 1.
NOTE: Chronograph minute hand will synchronize with chronograph second hand during
chronograph zero reset.
B
A
2
1
3
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
MINUTE HAND
24-HOUR HAND
B
A
2
1
3
CHRONOGRAPH
MINUTE HAND
24-HOUR HAND
CHRONOGRAPH
SECOND HAND
6
Chronograph Stopwatch VD57B
DATE SETTING (on some models only)
1. Pull crown out to position 2.
2. Rotate clockwise to set date.
3. Push crown back to position 1.
TIME SETTING
1. Pull crown out to position 3.
2. Rotate clockwise to set time.
3. Return crown to position 1.
USING THE STOPWATCH
1. Press A to start/stop the stopwatch.
2. Press B to control the split time and reset.
STOPWATCH HAND ADJUSTMENT
1. Pull crown out to position 3.
2. Press A to reset the stopwatch 1/10 second hand to the “0” position.
3. Press B to reset the second and minute hands.
4. Each press of A or B will move the chronograph hands by one increment/decrement.
Press and hold A or B for fast increment/decrement.
NOTE: If the stopwatch hands function improperly, pull out crown and press A and B at the same
time for over 2 seconds. When the pushers are released, the stopwatch second and 1/10 second
hands will spin around and return to “0.” This will indicate that the internal circuit has been reset.
B
A
2
1
3
MINUTE HAND
1/10 SECOND HAND
SECOND HAND
7
Chronograph VD51B
DATE SETTING
1. Pull crown out to position 2.
2. Rotate the crown clockwise until
the preview day’s date appears.
3. Return crown to position 1.
TIME SETTING
1. Pull crown out to position 2 when
the second hand is at the 12 o’clock position.
2. Rotate crown to set time.
3. Return crown to position 1.
USING THE STOPWATCH
1. Press A to start/stop the stopwatch.
2. Press B to control split time and reset.
NOTE: The measurement time is indicated by the stopwatch hands that move
independently of the center hands (and 24- hour hand where applicable).
NOTE: The stopwatch can measure up to 60 minutes.
STOPWATCH HAND ADJUSTMENT
1. Pull crown out to position 3.
2. Press A or B to reset all stopwatch hands to “0” position.
3. Each press of A or B will rotate hands clockwise; press B to rotate hands counter-clockwise.
Press and hold A or B for fast increment/decrement.
4. Return crown to position 1.
NOTE: Before setting the time, check if all the chronograph hands - 1/10 second
(where applicable), second, minute - are at the “0”(12 o’clock) position.
NOTE: If the stopwatch is in use, press the buttons in the following order to reset it,
and then check if the hands return to the “0” position.
*If the chronograph is counting: A ° B
*If the stopwatch is stopped: B
*If the split time is displayed: B ° A ° B
B
A
2
1
3
SECOND HAND
MINUTE HAND
8
Chronograph VD53, VD53B, VR32A25
DATE SETTING
1. Pull crown out to position 2.
2. Rotate clockwise to set date.
3. Return crown back to position 1.
TIME SETTING
1. Before setting the time, make sure the
chronograph is stopped and set to zero
(12:00) position.
2. Pull crown out to position 3.
3. Rotate crown clockwise to set time.
4. Return crown to position 1.
CHRONOGRAPH
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
SPLIT TIME
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
CHRONOGRAPH ZERO RESET
1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3.
2. Press A to rotate hands clockwise; press B to rotate hands counter-clockwise.
3. Each press of A or B will move the chronograph hands by one increment/decrement.
Press and hold A or B for fast increment/decrement.
4. When both hands are in the zero position, reset time and return crown to position 1.
B
A
2
1
3
24-HOUR
HAND
MINUTE HAND
SECOND HAND
9
Automatic 8N24-N-LR-DZ, NH38A3M
WINDING THE MAINSPRING
1. Rotate the crown clockwise at position 1. Wind approximately 10 times clockwise
and it will start to move naturally.
TIME SETTING
1. Pull the crown out to position 2.
2. Rotate crown to set time.
3. Return crown back to position 1.
2
1
HOUR HAND
MINUTE HAND
SECOND HAND
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Diesel JS16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Diesel JS16 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Diesel JS16

Diesel JS16 User Manual - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info