Manual Diesel DZ7218 (page 13 of 18) (English)

553183

Zoom out

Zoom in

1/18

- 1 -

FO-002

DZ7076, DZ7077, DZ7078,

DZ7083, DZ7093, DZ7094

MLG-035

DZ7107, DZ7108

ENLARGE ART FROM BOOK BY 125%

except this page = 115%

DIGITAL MOVEMENT GUIDE

MLL033

DZ5145, DZ5146

FDT003

DZ7006, DZ7043, DZ7046,

DZ7142, DZ7143, DZ7144

FL0521

DZ7099, DZ7100

FL137EA

DZ5175, DZ5176

ENGLISH

G3 & G1

DZ7122, DZ7123, DZ7124,

DZ7152, DZ7154, DZ7155,

DZ7180, DZ7184 - DZ7186

BJ2679

DZ7187 - DZ7188

QBJ3101-AA

DZ7177 - DZ7179, DZ7197 -

DZ7201

(for digital display only)

BJ3170

DZ7153, DZ7156, DZ7157,

DZ7189 - DZ7192

(for digital display only)

BJ2957

DZ7196, DZ7208, DZ7209

(for digital display only)

2 / 2011

FL137AX

DZ7101 - DZ7103, DZ7125 -

DZ7127, DZ7193, DZ7194,

DZ7214, DZ7221

(for digital display only)

FL075AB

DZ7033, DZ7034, DZ7066,

DZ7068, DZ7089, DZ7137,

DZ7138, DZ7139, DZ7140,

DZ7141, DZ7147, DZ7148

FL610AB, MLG367D

DZ7118, DZ7119, DZ7120,

DZ7121, DZ7169 - DZ7172,

DZ7235, DZ7236

QAA-006, QAA-033

DZ7095, DZ7096, DZ7097,

DZ7098, DZ7105, DZ7106,

DZ7113, DZ7115, DZ7116,

DZ7117, DZ7189 - DZ7190

MD-FL298X, FL388,

QFL226DB

DZ7081, DZ7082, DZ7130 -

DZ7136, DZ7145, DZ7146,

DZ7149 - DZ7151, DZ7181 -

DZ7183, DZ7211 - DZ7213

F145GR3

DZ7069 - DZ7071, DZ7087,

DZ7117

ZD0603B01

DZ5173, DZ5174, DZ7079,

DZ7080, DZ7111, DZ7112

MLL-045

DZ7091, DZ7092, DZ7109,

DZ7110, DZ7162, DZ7176,

DZ7237, DZ7238

QFL631BA

DZ7162 - DZ7168, DZ7176,

DZ7218

QBJ2718-AA

DZ7173 - DZ7175, DZ7195,

DZ7202 - DZ7205

FO-001

DZ7206, DZ7207

(for digital display only)

- 2 -

IMPORTANT TO KNOW!

• Whenthewatchisunderwaterorwet,neverusethepushers/bezels,orsetthetime.Watchcasesandmetalbraceletsshouldberinsedthoroughlyinfreshwaterafterbeinginsaltwater.

• Nohottub/sauna.PleasedonottakeyourDIESELwatchintothehottub/sauna.Thecombinationofextremeheatandwatermaycauseyourwatchtolosesomeofitswater-resistance.

• Nobackwardhand,ordate,adjustmentsshouldbemadewhentheanaloghandsreadbetween8pmand3am.Atthesetimes,thegearsaretooclosetogetherandsuchachangecould

causedamage.

• Tightenscrewlockcrowncompletely.

• Alwayssetthecrowninthenormalposition.

RESISTANCE TO WATER

Depth WATER-RESISTANT3BAR(30M) WATER-RESISTANT5BAR(50M) WATER-RESISTANT10BAR(100M)

Casebackmarking 3ATM 5ATM 10ATM

Lightspray,perspiration,lightrain,etc.

OK OK OK

Bathing,etc.

NO OK OK

Swimming,etc.

NO NO OK

Skindiving(divingwithoutoxygencylinder)

NO NO OK

Water-resistantcharacteristics Normaldailywatercontact. Suitableforbathing,butcannotbewornforswimmingordiving. Suitableforskindiving.

Automatic Winding Movements

Atimepiecewithanautomaticwindingmovementobtainsthepowertowinditselfbythemovementofyourwrist,thereisnobattery.Therefore,notwearingthetimepieceforseveralconsecutivedays

couldexhaustthepowerreserve.Ifyourwatchstops,itisrecommendedthatyoumanuallywindthemovementbyrotatingthecrownclockwisetoachievethenecessarypowerreserve.

Itisimportantthatyourtimepieceisadjustedtomatchthesizeofyourwrist.Aloosefitmayresultinalossincapacityofthetimepiecetowinditself.Whenfullywound,yourtimepiecehasapower

reserveofapproximately38hours.

Automatic 6T51

1. Tostarttime-keeping,rotatethecrownclockwise15-20timesinposition1.

2. Pullcrownouttoposition2androtateclockwisetosettime.Pushcrownbacktoposition1.

3. Pullcrownouttoposition2.Thenpullcrownoutfromposition2toposition3toadvancedatebyoneday.Eachtimethe

crownispulledfromposition2toposition3thedateisadvancedbyoneincrement.Returncrowntoposition1.

(1)

(2) (3)

DATE

TV Automatic Movement

WINDING

Withthecrownintheposition1,turnthecrown15-20timesandthemovementwillstartaftershakingthewatchslightly.

Afterapproximately40-42hours,thetimepiecewillneedtobewound.

SETTING THE TIME

1. Pullcrownouttoposition2.

2. Turncrowntosethourandminutehands.

3. Pushcrownbacktoposition1.

SETTING THE DATE

1. Pullthecrowntoposition2.

2. Pullthecrownfromposition2toposition3,thendateadvanceoneday.

3. Afterthedatehasbeenset,pushthecrownbacktoposition1.

(1)

(2) (3)

DATE

MINUTEHAND

SECONDHAND

HOURHAND

Automatic Winding Movement 8215

WINDING

Withthecrownintheposition1,turnthecrown15-20timesandthemovementwillstartaftershakingthewatchslightly.

Afterapproximately40-42hours,thetimepiecewillneedtobewound.

SETTING THE TIME

1. Pullthecrownouttoposition3.

2. Turnthecrowntosetthehourandminutehands.

3. Pushthecrownbacktoposition1.

SETTING THE DATE

1. Pullthecrownouttoposition2.

2. Turnthecrowncounter-clockwisetosetthedate.

3. Pushthecrownbacktotheposition1.

(1)

(2) (3)

DATE

MINUTEHAND

SECONDHAND

HOURHAND

- 3 -

Day/Date Watch IS02, 507.2-3, 517.2, 2105, 2305, 2405

DATE SETTING

1. Pullthecrownouttoposition2.

2. Turnclockwiseandsetthedateforthepreviousday.

DAY SETTING

Withcrownstillinposition2,turncounter-clockwiseandsetthedayforthepreviousday.

TIME SETTING

1. Pullcrownouttosetting3.

2. Turncounter-clockwisetoadvancethetimeandcontinueuntiltheday/datechangestothepresentday.

3. Setthecorrecttime.

4. Pushcrownbacktoposition1.

Date Watch GL10, IS13, VJ32A11, VJ32A31, 9T13, 505.2-3, 515.1-3, 515.2-3, 585.2, 715-2, 2115, 2315

DATE SETTING

1. Pullthecrownouttoposition2.

2. Turncounter-clockwiseandsetthedateforthepreviousday.

TIME SETTING

1. Pullcrownouttosetting3.

2. Turncounter-clockwisetoadvancethetimeandcontinueuntiltheday/datechangestothepresentday.

3. Setthecorrecttime.

4. Pushcrownbacktoposition1.

(1)

(2) (3)

DATE

(1)

(2) (3)

DATE

DAY

FRONT BACK

BUTTONS

CROWN

ELBUTTON

3 Hand with EL Watch 6N30/OU30

EL FUNCTION

TheEL(light-up)buttonislocatedabovethecrown.Pressingitoncewillactivatethelight-upfunctionofthedisplaymakingthe

displayfacevisibleinlow-lightsituationsfor3seconds.

DZ1065 and DZ1066 hold rights covered under U.S. Patent numbers: 6,106,127, 6,299,321, and 6,486,561.

Dual Time Watch K62/132

TIME SETTING

1. Pushbuttonstomovehands.

2. Setcorrecttime.

Sub-Second 1L45

TIME SETTING

Pullcrownouttoposition2androtatetosettime.

NOTE: When crown is pushed back to position 1, small second hand begins to run.

(1)

(2)

SMALLSECONDHAND

2 Eye Day/Date Multifunction VX36A1

(1 crown)

DATE SETTING

1. Pullcrownouttoposition2.

2. Turnclockwisetoadvancedatehand.

3. Pushcrownbacktoposition1.

DATE AND TIME SETTING

1. Pullcrownouttoposition3.

2. Turnclockwisetoadvancehourandminutehands.

The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have

reached the desired day.

(1) (2) (3)

DATE

DAY

- 4 -

Three Eye Multifunction VX3J

(1 crown)

DATE SETTING

1. Pullcrownouttoposition2.

2. Turnclockwisetoadvancethedatehand.

3. Pushcrownbacktoposition1.

DAY AND TIME SETTING

1. Pullcrownouttoposition3.

2. Turnclockwisetoadvancehourandminutehands.

The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have

reached the desired day.

24-HOUR SUB-DIAL SETTING

The24-hourhandmovescorrespondinglywiththehourandminutehands.Whensettingthetimebesuretocheckthatthe

24-hourhandissetproperly.

(1) (2) (3)

DATE

24-HOUR

DAY

Multifunction 6P27

TIME AND WEEKDAY SETTING

1. Pullcrownouttoposition3,stoppingthesecondhandat12o’clock.

2. Turncrownclockwisetosetweekday(hour,minute,and24-hourhandswillalsomove).

NOTE: Do not set the day by turning the crown counter-clockwise, or the date may not change correctly.

3. Turnhourandminutehandsclockwisetosetthetime.Toensurethetimeissetaccurately,firstturntheminute-hand5

minutesaheadofthecorrecttime,thenturnback(counter-clockwise)tothecorrecttime.

4. Returncrowntoposition1.

NOTE: Make sure you have correctly set AM/PM time by checking the 24-hour hand.

DATE SETTING

1. Pullcrownouttoposition2.

2. Turncrowncounter-clockwisetosetdate.

NOTE: Do not set the date between 9:00 p.m. and 12:30 a.m. or the date may not change correctly.

(1) (2)(3)

DATE

DAY

24-HOURHAND

Chronograph 5020B

(1 crown/2 pushers)

DATE AND TIME SETTING

1. Pullcrownouttoposition2.

2. Turncounter-clockwiseandsetthedateforthepreviousday.

3. Pullcrownouttoposition3.Allchronographhandswillreturntozeroposition.Donotreturnthecrowntoitsnormal

positionwhilethehandisreturningtozero,orelsethepositionthehandisinwhenthisisdonewillberecognizedasthe

newzeroposition.

4. Turncrownclockwiseuntilcorrectdateisdisplayedindatewindow.

5. Turncrowntosetthetime.

6. Returncrowntoposition1.

CHRONOGRAPH OPERATION

1. PushAtostart/stopthechronograph.

2. PushBtoresetthechronograph.

SPLIT TIME MEASUREMENT

1. PressBwhilethechronographisrunning;timingwillcontinueinbackground.

2. PressBagaintostartthenextinterval;thethreechronographhandswilladvancetotheongoingmeasuredtime.

3. PressAtostopchronograph.

4. PressBtoreset.

CHRONOGRAPH ZERO RESET

1. Pullcrownouttoposition3.

2. PressandholdAandBsimultaneouslyfor2secondsuntilchronographsecondhandrotatesaroundthedial.

3. PressAtoresetthechronographsecondhandto12:00(zero)position.Eachpressadvancesthechronographsecondhand

onemark.IfAishelddownforover2seconds,thechronographsecondhandadvancescontinuously.

4. PressBtosetandadvancetothechronographminuteandhourhands.

5. Repeatstep3toresetchronographminuteandhourhands.

6. Returncrowntoposition1whenchronographhandsareresettozero.

(B)

(A)

(1) (2)

(3)

DATE

CHRONOGRAPHSECONDHAND

CHRONOGRAPHHOUR

ANDMINUTEHANDS

SECONDHAND

Two Eye Multifunction 6P25, 6P75

DATE SETTING

1. Pullcrownouttoposition2.

2. Turncounter-clockwisetoselectdate.

DAY AND TIME SETTING

1. Tosettime,pullcrownouttoposition3.

2. Turnclockwisetosethourandminutehands.Thehandshowingdaysoftheweekwillalsomovewiththehourandminute

hands.Keepturninguntilyouhavereachedthedesiredday.

3. Pushcrownbacktoposition1.

(1)

(2)

(3)

DAY

DATE

(1)

(2)

(3)

DAY

DATE

- 5 -

Chronograph Stopwatch OS10 (no date - OS30)

(1 crown/2 pushers)

TIME SETTING

1. Pullcrownouttoposition3.

2. Turncrowntosetthedesiredtime.

3. Returncrowntoposition1.

DATE SETTING

1. Pullcrownouttoposition2.

2. Turncrowncounter-clockwiseuntilthecorrectdateisshowninthedatewindow.

3. Returncrowntoposition1.

CHRONOGRAPH OPERATION

1. Press

Atostart/stopthechronograph.

2. PressBforreset.

ADJUSTING THE CHRONOGRAPH

1. Pullcrowntoposition3.

2. Press

Atoresetthesecondhandto“0.”

3. PressBtoresetthechronographminuteandhourhands.

4. Resetthewatchtothecurrenttimeandreturncrowntoposition1.

(A)

(1) (2)(3)

(B)

MINUTEHAND

HOURHAND

SECONDHAND

Chronograph with Date OS20, FS00, FS20

(1crown/2pushers)

TIME SETTING

1. Pullcrownouttoposition3.Chronographsecondhandwillreturntozeroposition.Donotreturnthecrowntoitsnormal

positionwhilethehandsarereturningtozero,orelsethepositionthehandsareatwhenthisisdonewillberecognizedas

thenewzeroposition.

2. Turntosethour,minuteand24hourhands.

3. Returncrowntoposition1.

DATE SETTING

1. Pullcrownouttoposition2.

2. Turnclockwisetosetthedate.

3. Returncrowntoposition1.

CHRONOGRAPH OPERATION

1. PushAtostart/stopthechronograph.

2. PushBtoresetthechronograph.

CHRONOGRAPH ZERO RESET

1. Pullcrownouttoposition3.

2. PressAtosetthechronographsecondhandto12:00(zero)position.Eachpressadvancesthechronographsecondhand

onemark.IfAishelddownforover2seconds,thechronographsecondhandadvancescontinuously.

3. Returncrowntoposition1.

(B)

(A)

(1) (2)

(3)

CHRONOGRAPH

SECONDHAND

CHRONOGRAPH

MINUTEHAND

24HOURHAND

DATE

SECONDHAND

(B)

(A)

(1) (2)

(3)

Chronograph JS15, JS25, JS26

TIME AND DATE SETTING

1. Pullcrownouttoposition2.

2. Rotatecrownclockwiseuntilthepreviousday’sdateisshowninthedatewindow.

3. Pullcrownouttoposition3.

4. Rotatecrownclockwiseuntilthecorrectdateisshowninthedatewindow.

5. Continuetorotatecrowntosetcorrectam/pmtime.

NOTE: 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to

check that the 24-hour hand is set properly.

6. Returncrowntoposition1.

NOTE: When the crown is in position 2, do not press the pushers. Otherwise the chronograph hands will move.

NOTE: Do not set the date between 9:00 p.m. and 1:00 a.m. to ensure accuracy.

CHRONOGRAPH

1. PressAtostart/stopthechronograph.

2. PressBtoresettozero.

CHRONOGRAPH ZERO RESET

1. Ifeitherofthechronographhandsisnotatthezero(12:00)position,pullcrownouttoposition3.

2. PressAtomovehandsclockwise;pressBtomovehandscounter-clockwise.EachpressofAorBwillmovethe

chronographhandsbyoneincrement/decrement.OrpressandholdAorBforfastincrement/decrement.

3. Whenbothhandsareinthezeroposition,resettimeandreturncrowntoposition1.

NOTE: Chronograph minute hand will synchronize with chronograph second hand during chronograph zero reset.

(A)

(1) (2)(3)

(B)

CHRONOGRAPH

SECONDHAND

CHRONOGRAPH

MINUTEHAND

24-HOURHAND

(A)

(B)

(1) (2) (3)

CHRONOGRAPH

SECONDHAND

CHRONOGRAPH

MINUTEHAND

24-HOURHAND

- 6 -

Chronograph Stopwatch VD55B, VD57B

(1 crown/2 pushers)

TIME SETTING

1. Pullcrownouttoposition3.

2. Settimebyturningthecrownclockwise.

3. Pushbacktoposition1tostartthewatch.

USING THE STOPWATCH

1. PressAtostart/stopthestopwatch.

2. PressBtocontrolthesplittimeandreset.

STOPWATCH HAND ADJUSTMENT

1. Pullcrownouttoposition3.

2. PressAtoresetthestopwatch1/10secondhandtothe“0”position.

3. PressBtoresetthesecondandminutehands.Thehandsonlymoveclockwise.

4. WitheachpressofAorB,thehandsmoveoneposition.Theymovequicklyifthebuttonsarekeptpressed.

NOTE: If the stopwatch hands function improperly, pull out crown and press A and B at the same time for over 2

seconds. When the buttons are released, the stopwatch second and 1/10 second hands will spin around and

return to “0.” This will indicate that the internal circuit has been reset.

DATE SETTING (on some models only)

1. Pullcrownouttoposition2.

2. Turnclockwiseuntildesireddateappearsinwindow.

3. Pushcrownbacktoposition1.

(A)

(1) (2)(3)

(B)

MINUTEHAND

1/10SECONDHAND

SECONDHAND

Chronograph OS60

(1 crown/2 pushers)

SETTING THE TIME

1. Pullthecrownouttoposition3.Chronographsecondhandand1/20secondhandwillreturntozeroposition.Donotreturn

thecrowntoitsnormalpositionwhilethehandsarereturningtozero,orelsethepositionthehandsareatwhenthisis

donewillberecognizedasthenewzeroposition.

2. Turnthecrowntosetthedesiredtime.

3. Returnthecrowntoitsnormalposition.

SETTING THE DATE

1. Pullthecrownouttoposition2.

2. Turnthecrowncounterclockwiseuntilthecorrectdateisshowninthedatewindow.

3. Returnthecrowntoitsnormalposition.

CHRONOGRAPH ZERO RESET

1. Pullthecrownouttoposition3.Chronographsecondhandand1/20secondhandwillreturntozero.Donotreturnthe

crowntoitsnormalpositionwhilethehandsarereturningtozero.Doingsowillcausethepositionofthehandstobe

recognizedasthenewzeroposition.

2. Push(A)tosetthechronographsecondhandto12:00(zero)position.Eachpressof(A)advancesthechronographsecond

handonemark.If(A)ishelddownforover2seconds,thechronographsecondhandadvancescontinuously.

3. PushBtosetthechronograph1/20secondhandto12:00(zero)position.Eachpressof(B)advancesthe1/20second

handonemark.If(B)ishelddownforover2seconds,the1/20secondhandadvancescontinuously.

4. Returncrowntoitsnormalposition.

5. Press(B)toresetallhandstothezeroposition.

CHRONOGRAPH OPERATION

1. Push(A)tostart/stopthechronograph.

2. Push(B)toresetthechronograph.

3. Whenthemeasuredtimeisover30seconds,the1/20-secondhandstops;however,thewatchcontinuesmeasuringthe

elapsedtime.TheexacttimeelapsedisindicatedwhenAispressedtostopthechronograph,andthe1/20-secondhand

movestotheactualtime.Thehandreturnstothe“0”positionwhenBispressedandthechronographisreset.

4. If(B)ispressedagainafterchronographisreset,the1/20-secondhandchangestomeasureeachsecond.

(A)

(1) (2)(3)

(B)

MINUTE

HAND

1/20

SECONDHAND

HOUR

HAND

- 7 -

Chronograph ISA 8161/202

(1 crown/2 pushers)

SETTING THE TIME

1. Pullcrownouttoposition3.

2. Settimebyturningthecrown.

3. Pushthecrownbacktoposition1.

SETTING THE DATE

1. Pullcrownouttoposition2.

2. Setdatebyturningthecrown.

3. Pushthecrownbacktoposition1.

RESETTING CHRONOGRAPH (after battery exchange or mishandling only)

1. PressbothAandBpushersatthesametime.

2. NextpressBtoresettheminutes.

3. ThenpressAtoresetseconds.

4. ToexitpressbothAandBpushersatthesametime.

MEASURING CUMULATIVE TIMES

1. PressApushertostart.

2. PressApushertostop.

3. PressBpushertoreset.

MEASURING SPLIT TIMES

1. PressApushertostart.

2. PressBpushertosplit.

3. PressBpushertorestart.

4. PressApushertostop.

5. PressBpushertoreset.

(A)

(1)(2) (3)

(B)

MINUTEHAND

SECONDHAND

DATE

Chronograph ISA 8171/201

TIME AND DATE SETTING

1. Pullcrownouttoposition2.

2. Rotatecrownclockwiseuntilthepreviousday’sdateisshowninthedatewindow.

3. Pullcrownouttoposition3.

4. Rotatecrownclockwiseuntilthecorrectdateisshowninthedatewindow.

5. Continuetorotatecrowntosetcorrectam/pmtime.

6. Returncrowntoposition1.

NOTE: Do not set the date between 9:00 p.m. and 12:30 a.m. to ensure accuracy.

CHRONOGRAPH OPERATION

1. PressAtostart/stopthechronograph.

2. PressBtorestart/reset.

NOTE: After 2 hours of continuous running, the chronograph will automatically stop and reset to save the battery.

SPLIT TIME

1. PressBwhilethechronographisrunning.

2. PressBagaintoreturntothechronograph.

3. PressAtofinalizetiming.

4. PressBtoreset.

CHRONOGRAPH ZERO RESET

1. Ifeitherofthechronographhandsisnotatthezero(12:00)position,pullcrownouttoposition2.

2. PressBtoresetchronographminutehand.EachpressofBwilladvancethechronographminutehandbyoneincrementor

pressandholdBforfastadvance.

3. PressAtoresetchronograph1/5secondhand.EachpressofBwilladvancethechronograph1/5secondhandbyone

incrementorpressandholdBforfastadvance.

(B)

(A)

(1) (2)

(3)

CHRONOGRAPH

1/5SECONDHAND

SECONDHAND

CHRONOGRAPH

MINUTEHAND

DATE

- 8 -

Digital BJ3170

NORMAL TIME DISPLAY

1. PressAtochangemode.Modesequenceis:normaltime,chronograph,alarm,timesetting.

2. PressBtodisplayalarm.

3. PressCtodisplaydate.

4. PressA+Btotogglechimeon/off(alldaysoftheweekwilldisplayfor“on”).

5. PressB+Ctotogglealarmon/off.Alarmwillsoundfor60seconds;pressBtosilencealarmorpressDforsnoozefunction

(alarmwillsound5minuteslater).

CHRONOGRAPH MODE

1. PressAtochangetochronographmode.

2. PressCtostart/stopthechronograph.

3. PressBwhenthechronographisstoppedtoreset.

NOTE: When the chronograph is running, press A to return to normal time display. Chronograph will continue to

count time.

SPLIT TIME

1. PressBwhilethechronographisrunning.

2. PressCtonalizetiming.

3. PressBtodisplayallcounts.

4. PressBagaintoreset.

ALARM MODE

1. PressAtochangetoalarmmode;hourwillbeginashing.

2. PressCtoincreasedigits;pressandholdCforfastadvance.

3. PressBtoadvancetominutes.

4. PressCtoincreasedigits;pressandholdCforfastadvance.

5. PressBtosavedata.

6. PressAtoexitandreturntonormaltimedisplay.

TIME AND DATE SETTING

1. PressAtochangetotimesettingmode;secondswillbeginashing.

2. PressCtoresetsecondstozero.

3. PressBtoadvancetominutes.

4. PressCtoincreasedigits;pressandholdCforfastadvance.

5. PressBtosetandadvancetonextsettingvalue.

6. Settingsequenceis:seconds,minute,hour,date,month,weekday.

NOTE: When setting the hour, “H” will display for 24-hour format, “A” or “P” will display for 12-hour format.

(A)

(B)

(C)

Chronograph Stopwatch VD54 (with date - VD53)

(1 crown/2 pushers)

TIME AND DATE SETTING

1. Beforesettingthetime,makesurethechronographisstoppedandsettozero(12:00)position.

2. Pullcrownouttoposition2.

3. Turncrownclockwiseuntilthepreviousday’sdateisdisplayed.

4. Pullcrownouttoposition3whenthesecondhandisatthe12:00position.

5. Turncrowntosettime.

Note: 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to

check that the 24-hour hand is set properly.

6. Returncrowntoposition1.

Note: When the crown is in position 2, do not press the pushers. Otherwise the chronograph hands will move.

CHRONOGRAPH

1. PressAtostart/stopthechronograph.

2. PressBtoresettozero.

SPLIT TIME

1. PressBwhilethechronographisrunning.

2. PressBagaintoreturntothechronograph.

3. PressAtofinalizetiming.

4. PressBtoreset.

CHRONOGRAPH ZERO RESET

1. Ifeitherofthechronographhandsisnotatthezero(12:00)position,pullcrownouttoposition3.

2. PressAtomovehandsclockwise;pressBtomovehandscounter-clockwise.

3. Returncrowntoposition1.

(B)

(A)

(1) (2)

(3)

24-HOURHAND

MINUTEHAND

SECONDHAND

- 9 -

Ana-Digi FL052I

NORMAL TIME DISPLAY

1. PressAtochangemode.Modesequenceis:normaltime,worldtime,alarm,chronograph,

memoryrecall,timer.

2. PressBforEL.

3. PressCtotogglechimeon/off.

4. PressDtotoggleDSTon/offfortheselectedcity.

5. Inanymodeorsetting,ifnopusherisoperatedfor60seconds,settingwillbereturnedto

normaltimedisplay.

TIME AND CALENDAR SETTING

1. PressandholdBfor2secondstoentersettingmode.12/24-hourtimewillbeginflashing.

2. PressCtoselect12/24-hourtime.

3. PressAtosetandadvancetoseconds.

4. PressCtoresetsecondstozero.

5. PressAtosetandadvancetominute.

6. PressCtoincreasethedigit;pressDtodecreasethedigit.

7. PressAtosetandadvancetonextsettingvalue.

8. Settingsequenceis:12/24-hourformat,seconds,minute,hour,year,month,date,andcity.

9. PressBtoexitsettingmode.

NOTE: Weekday will automatically update upon exiting setting mode.

WORLD TIME MODE

1. PressAtochangetoworldtimemode.

2. PressCtoselectcity.

3. PressDforDSTon/offfortheselectedcity.

Words City

Hour

Difference

Words City

Hour

Difference

MDY

HNL

ANC

LAX

DEN

CHI

NYC

CCS

RIO

-2H

-1H

LON

Midway

Honolulu

Anchorage

LosAngeles

Denver

Chicago

NewYork

Caracas

RiodeJaneiro

-2H

-1H

London

-11hours

-10hours

-9hours

-8hours

-7hours

-6hours

-5hours

-4hours

-3hours

-2hours

-1hour

0hours

PAR

CAI

MOW

DXB

KHI

DAC

BKK

HKG

TYO

SYD

NOU

AKL

Paris

Cairo

Moscow

Dubai

Karachi

Dacca

Bangkok

HongKong

Tokyo

Sydney

Noumea

Auchland

+1hour

+2hours

+3hours

+4hours

+5hours

+6hours

+7hours

+8hours

+9hours

+10hours

+11hours

+12hours

ALARM MODE

1. PressAtochangetoalarmmode.

2. PressCtoscrollthroughalarms(3alarms).

3. PressDtotogglealarmon/off.

4. Alarmwillsoundfor30seconds;pressanypushertosilencealarm.

(B)

(A)

(C)

(D)

ALARM SETTING

1. PressandholdBfor2secondstoentersettingmode;minuteswillbeginflashing.

2. PressCtoincreasethedigit;pressDtodecreasethedigit.

3. PressAtosetandadvancetohour.

4. PressCtoincreasethedigit;pressDtodecreasethedigit.

5. PressBtoexitsettingmode.

NOTE: Alarm is automatically turned on when setting is changed.

CHRONOGRAPH MODE

1. PressAtochangetochronographmode.

2. PressCtostartthechronograph;pressDtostopthechronograph.

3. PressDagaintoreset.

SPLIT TIME

1. PressCwhilethechronographisrunningforsplittime(willrecordupto20laps).

2. PressDtofinalizetiming.

MEMORY RECALL MODE

1. PressAtochangetorecallmodewheninformationisrecordedinthechronograph.

2. PressCtoviewnextlap;pressDtoviewpreviouslap.

TIMER MODE

1. PressAtochangetocountdowntimermode.

2. PressCtostart/stopthetimer.

3. PressDtoresetthetimerwhenitisnotrunning.

4. Timerwillsoundfor30secondsuponreachingzero;pressanypushertosilencealarm.

TIMER SETTING

1. PressandholdBfor2secondstoentersettingmode;secondswillbeginflashing.

2. PressCtoincreasedigit;pressDtodecreasedigit.

3. PressAtosetandadvancetonextsettingvalue.

4. Settingsequenceis:seconds,minutes,hours.

Digital FL137AX / FL137EA / FL137AB

NORMAL TIME DISPLAY

1. PressAtochangedisplay.Displaysequenceistime,calendar,seconds.

2. PressBtotoggle12/24-hourformat.

TIME AND DATE SETTING

1. PressandholdBfor2secondstoentersettingmode;yearwillbeginflashing.

2. PressAtoadvancedigit;pressandholdAforfastadvance.

3. PressBtosetandadvancetonextsettingvalue.

4. Settingsequenceisyear,month,date,hour,minute.

5. PressBtoexitsettingmode.

NOTE: Hour will be displayed in 24-hour format in time setting mode.

NOTE: If no pusher/button is operated for 30 seconds, all changes will be saved and the

setting will automatically return to display mode.

Digital FL137EA

(B)

(A)

(B)

(A)

Digital FL137AX

SIMPLEANALOG

(1crown)

DIGITAL

FL137AX

(2pushers)

SIMPLEANALOG

(1crown)

- 10 -

Digital FL291

OVERVIEW

FeaturesincludeTIME/DATE,CHRONO,TIMER,ALARM,andLIGHT-UPEL.

LIGHT-UP EL

Press(A)toactivatelight-upfunctionfor3seconds.

TIME OF DAY MODE

- TosetTime,press(B)untilhourashes.Use(C)and(D)buttonstoselecthour.Press(B)toadvance.Pressandhold(B)to

completesetmode.

- Press(C)toviewtheTimeandDateDisplay.

- Pressandhold(C)tochangethetimefrom12hourto24hour.

- Press(D)totogglehourlychime.

CHRONO MODE

- Press(C)tostarttime.Press(D)tostoptime.Press(C)twicetoenablesplittime.Press(D)tostoptime.

- Pressandhold(D)toresetCHRONOmode.

TIMER MODE

- TosetTIMER,pressandhold(B)untilhourashes.Use(C)and(D)Buttonstoselecthour.Press(B)toadvancetominutes/

seconds.Pressandhold(B)tocompleteTIMERmode.

- Press(C)tostartTIMER.

- 10Beepswillbesoundedwhentimervaluereacheszero.

ALARM MODE

- TosetALARM,pressandhold(B)untilhourashes.Use(C)and(D)Buttonstoselecthour.Press(B)toadvancetominutes.

Pressandhold(B)tosetALARMmode.

- Press(D)totogglealarm.

- ALARMwillsoundfor20seconds.

- PressanybuttontostopALARM.

MODE OPERATION

BUTTONS

LIGHT

MODE

START/SPLIT

RESET/STOP

TIME OF DAY

PRESSONCE EL CHRONO TOGGLETIME/DATE CHIMEON/OFF

PRESSANDHOLD – SETTING TIMEFORMAT –

CHRONO

PRESSONCE EL TIMER START/SPLIT STOP

PRESSANDHOLD – – – RESET

TIMER

PRESSONCE EL ALARM START STOP

PRESSANDHOLD – SETTING – RESET

ALARM

PRESSONCE EL TIMEOFDAY – ALARMON/OFF

PRESSANDHOLD – SETTING – –

SETTING

PRESSONCE EL NEXTFIELD INCREMENT DECREMENT

PRESSANDHOLD – CONFIRM/EXIT FASTINCREMENT FASTDECREMENT

NOTE:

- Analog time and digital time may not be in sync.

- The key tone enable/disable will be dependent on the HOURLY CHIME enable/disable status.

(A)

(D)

(B)

(C)

Hourlychime/Keytone

Alarmenable/disable

Chronoicon

Timericon

Digital FO-001

NORMAL TIME DISPLAY

PressAtochangedisplay.Displaysequenceisnormaltime,date,seconds.

TIME AND CALENDAR SETTING

1. Innormaltimedisplay,pressBtwice;monthwillbeginflashing.

2. PressAtoincreasedigits.

3. PressBtoadvancetonextsettingvalue.

4. Settingsequenceis:month,date,hour,andminute.

5. PressBtoexitsettingmode.

NOTE: At any point in setting mode, press A to exit setting mode and return to normal time display.

(B)

(A)

- 11 -

Alarm Version FDT003 / BD3000

OVERVIEW

Thisinstructionbookisset-uptomirrorthelogicofthedigitalmodule.ThefeaturesDUAL

TIME,ALARM,CHRONOGRAPHandTIMERaredescribedintheordertheyappearasinthe

module.ThereforealmostallsettinginstructionsfallundertheOPTIONSsection.Eachmode

ofoperationiscoveredindetailbelow;however,thereareanumberofuniqueinnovations

thatneedtobeexplainedfirst.

LIGHT-UP EL

TheEL(light-up)buttonis(C).Pressingitoncewillactivatethelight-upfunctionofthe

displaymakingthedisplayfacevisibleinlow-lightsituationsfor3seconds.PressandholdtheELbuttonfor2secondsandtheAUTOELfunction

isturnedon,markedbytheAutoELicon.ThisfunctionenablestheELtobeactivatedwiththepressingofanyfunctionbuttons.Toturnthis

functionoff,pressandholdtheELbuttonagainfor2seconds.

DUAL TIME

Settwodifferenttimezonesandmoveeasilybetweenthetwobypressingbutton(A)whileinTimemode,alarmsswitchoveraccordingly.Under

T2setting,no12/24hourmodeadjustment.

AUTO EL

OPTIONS

COUNTDOWN

TIMER

CHRONO

TIME 1,2

Mode Icon Legend

Hourly chime on

ALARM

mode icon/on

ALARM

Week,1,2

Digital FDT003 / BD3000

ALARM

Alarm-weekisadailyreminderMondaythroughSunday.

Alarms 1 and 2maybeusedforonetimeorasrepeatreminders:

One Time Reminder:

Touseasaone-timereminder,simplysetallthedatafieldsforthespecifictime,date,&month.

Repeat Daily Reminder:

Tousetherepeatreminderforthesametimeeveryday,simplyfillinthetimefieldonly,leavingthedate,andmonthfieldempty(--).Thereminder

willrepeatatthesametimeeveryday.

Repeat Date Reminder:

Tousetherepeatreminderforthesamecalendardateeverymonth,simplyfillinthedateandtimefieldsonly,leavingthemonthfieldempty(--).

Thereminderwillrepeatonthesamecalendardate&timeeverymonth.

Alarms are automatically turned on after setting. To interrupt any alarm while sounding, press any button.

Alarms on/off:

TheAlarmmodecanbeaccessedbyrepeatedlypressing(B)tilltheAlarmiconisactivated.

1. Toconfirmanalarmssettingspress(A)toadvancethroughthem.

2. Toturnanalarm“on/off,”press(D)whilethatalarmisdisplayed,theword“on”willappear.

3. Press(D)againtoturnthealarm“off,”and(--)willappear.

CHRONOGRAPH

Thesmallestmeasureoftimeitcanmeasureis1/100thofasecondandthelargestis9hours,59minutes,59seconds,and991/100thofa

second.Thechronowillkeepontimingafterthismeasurement,howeverthehourcounterwillresetto“0.”TheChronomodecanbeaccessedby

repeatedlypressing(B)tilltheChronoiconisactivated.

START/STOP TIMING

1. Tobegintimingpress(D),thechronographwillbegintiming.

2. Tostoptimingpress(D),whilethechronographisstoppedyoumayresumetimingbypressing(D)orresetto“0:00:00:00”bypressing(E).

TIMER

Thismodulehasacountdownmodewith3presettimes:3minutes,5minutes,and10.Inadditiontothepresettimers,thereisoneFREEspace

fortheusertosetandstoreacustomtimersetting.Thetimerwillmeasureinincrementsof1second.Setthecountdowntimeranywhere

between5secondsand9hours59minutesand59seconds.Uponreaching“0”thecountdowntimerwillresetandbegincountingdownagain

automatically,keepingtrackofthenumberoftimesitdoessowiththerepeatcounter(upto99times).Anytimersetwillcontinuetocountdown

repeatedlyfor14-15hoursbeforestoppingandresettingitself.

1. Tobegintimingpress(D),thetimerwillbegintiming.

2. Tostoptimingpress(D),whilethetimerisstoppedyoumayresumetimingbypressing(D)orresetthetimertoitsstartvaluebypressing(E).

OPTIONS MODE

ThismodulehasanadditionalmodewithinwhichallthemodulesettingscanbeadjustednotunlikeatelevisionorVCR.TheOPTIONSmodecanbe

accessedbyrepeatedlypressing(B)tilltheOptionsiconisactivated.

1. WhileinOptionsmodepress(D)toscrollupthroughthemenuand(E)toscrolldownthroughthemenu.

2. Press(A)toselectthehighlightedmenuitem.ThisprocessisrepeatedthroughouttheOptionsmenuselections.Ifatanytimeyoudesireto

returntoapreviousmenupress(B).Bypressingandholding(B)for3secondsyouwillexittheOptionsmodeandgodirectlytoTIMEmode.

SETTING TIME/DATE

1. Press(B)tillOptionsiconisactivated.Presseither(D)or(E)till“Tm/Dt”ishighlighted,press(A)toselect.TheTime1,2iconswillbeginto

flash.

(seeFig.1)

2. Press(D)or(E)tohighlighteitherTime1or2,“Tm1orTm2”andpress(A)toselect.EithertheTime1,2iconwillbegintoflashdepending

onyourselection.

3. TheTimedefaultviewwilldisplaywiththeSECONDSflashingwhilesetting“T1”andbeginwithminutesflashingwhilesetting“T2”.Toreset

thesecondsto“00”press(D).Press(A)toselectandadvancetotheMINUTEsetting.

4. Pressing(D)will“+”theminutewhilepressing(E)will“–”theminute.Press(A)toselectandadvancetotheHOURsetting.

5. Pressing(D)will“+”thehourwhilepressing(E)will“–”thehour.Press(A)toselectandadvancetotheMONTHsetting.

6. Pressing(D)will“+”themonthwhilepressing(E)will“–”themonth.Press(A)toselectandadvancetotheDATEsetting.

7. Pressing(D)will“+”thedatewhilepressing(E)will“–”thedate.Press(A)toselectandadvancetotheYEARsetting.

(seeFig.2)

8. Pressing(D)will“+”theyearwhilepressing(E)will“–”theyear.Press(A)toselectandadvancetothe12/24HOURsetting.

9. Press(D)or(E)tohighlighteither12or24hourmode,“12Hor24H”andpress(A)toselect.

(seeFig.3)Atthispointblinkingsecondswill

appearagainonthedisplayandyoumaygothroughandchangeanyofthesettingsagainorpress(B)toEXITandreturntothe“Tm1,Tm2”

menu.Pressing(B)againwilltakeyoubacktotheOptionsmenu.

REMEMBER if you press and hold (B) at anytime during the above operation, any settings you have made will be saved and you will go

back to TIME mode.

~ continued on next page ~

Time 1 display

Time 2 display

Chronograph display

Alarm Weekday display

Alarms 1,2 display

Alarm Weekday display

Alarms 1,2 display

3:00 Timer display

FREE Timer display

Optionsdisplay

Figure 1

Figure 2

Figure 3

- 12 -

CHIME

WhenChimeis“on,”yourwatchwillchimeonceonthehoureveryhour:Achimewillalsoaccompanymodechanges,withahigherpitchedchime

signalingtheTIMEmode.

1. TosetChime“onoroff,”press(B)tillOptionsisactivated.Presseither(D)or(E)till“Alrms”ishighlighted,press(A)toselect.

2. Presseither(D)or(E)till“Chime”ishighlighted,press(A)toselect.TheChimeiconwillactivateindicatingthatthechimeison.

(seeFig.1)

3. Press(A)againtoturnchimeoff.

SETTING ALARMS

1. Press(B)tillOptionsiconisactivated.Presseither(D)or(E)till“Alrms”ishighlighted,press(A)toselect

(seeFig.2).TheAlarmW,1,2

iconswillbegintoflash.

2. Presseither(D)or(E)tohighlight,AlarmWeekday,1or2,“AL-wk,AL-1orAL-2”andpress(A)toselect.EithertheAlarmW,1,or2iconwillbegintoflash

dependingonyourselection.

ALARM- WEEK, “AL-wk”

1. Pressing(D)will“+”theminutewhilepressing(E)will“–”theminute.Press(A)toselectandadvancetotheHOURsetting.

2. Pressing(D)will“+”thehourwhilepressing(E)will“–”thehour.Press(A)toselect.Atthispointblinkingminuteswillappearagainonthedisplayandyoumaygo

throughandchangeanyofthesettingsagainorpress(B)toEXITandreturntothe“AL-wk,AL-1,AL-2orChime”menu.Pressing(B)againwilltakeyoubacktothe

Optionsmenu.

REMEMBER if you press and hold (B) at anytime during the above operation, any settings you have made will be saved and you will go back to TIME mode.

ALARM 1, 2, “AL-1, AL-2”

1. Presseither(D)or(E)tohighlightAlarm1or2,“AL-1orAL-2”andpress(A)toselect.EithertheAlarm1,2iconwillbegintoflashdependingonyourselection.

2. TheAlarm1or2defaultviewwilldisplaywiththeMINUTESflashing.Pressing(D)will“+”theminutewhilepressing(E)will“–”theminute.Press(A)toselectand

advancetotheHOURsetting.

3. Pressing(D)will“+”thehourwhilepressing(E)will“–”thehour.Press(A)toselectandadvancetotheMONTHsetting.

4. Pressing(D)will“+”themonthwhilepressing(E)will“–”themonth.Press(A)toselectandadvancetotheDATEsetting.

5. Pressing(D)will“+”datewhilepressing(E)will“–”thedate.Press(A)toselect.Atthispointblinkingminuteswillappearagainonthedisplayandyoumaygo

theOptionsmenu.

REMEMBER if you press and hold (B) at anytime during the above operation, any settings you have made will be saved and you will go back to TIME mode.

TIMER

1. TosettheFREETimer,press(B)tillOptionsisactivated.Presseither(D)or(E)till“Timer”ishighlighted,press(A)toselect.Thetimericonwillbegintoflash.

2. TheTimerdefaultviewwilldisplaywiththeSECONDSflashing.Pressing(D)will“+”thesecondswhilepressing(E)will“–”theseconds.Press(A)toselectandadvance

totheMINUTEsetting.

3. Pressing(D)will“+”theminutewhilepressing(E)will“–”theminute.Press(A)toselectandadvancetotheHOURsetting.

4. Pressing(D)will“+”thehourwhilepressing(E)will“–”thehour.Press(A)toselect.Atthispointblinkingsecondswillappearagainonthedisplayandyoumaygo

throughandchangeanyofthesettingsagainorpress(B)toEXITandreturntotheOptionsmenu.

REMEMBER if you press and hold (B) at anytime during the above operation, any settings you have made will be saved and you will go back to TIME mode.

VIEWS, “Views”

ThismoduleallowsfordifferentdisplayviewswhileinTIMEmode.Thereare(5)fiveviewstotaltochoosefromandoncesettheywillremainastheTimeviewuntilreset.

BASIC VIEW

Thisisthedefaultviewforthemodule.Itfeaturesaprominenttimewithseconds,dayanddate.

DATE/TIME, “Dt/Tm”

Thisviewfeaturesaprominentmonthanddate,thedayandyearandcurrenttime.

TIME1/TIME2, “T1/T2”

Thisviewfeaturesbothtimezonessimultaneously,withemphasisontime2.Thetimezoneemphasiscanbechangedbypressing(A)whileinTimemode.

TIME ONLY, “Tm”

Thisviewfeaturesalargehour,minutesandseconds.WhileinthisviewtheDt/Tmviewcanbeaccessedbypressing(D).Itwilldisplaythis

alternateviewonlywhile(D)isbeingpressed,oncereleasedTimeonlyviewreturns.

SETTING VIEWS

1. Press(B)tillOptionsiconisactivated.Presseither(D)or(E)till“Views”ishighlighted,press(A)toselect.

2. Press(D)or(E)tohighlightthedesiredviewandpress(A)toselect,settingthenewTimeviewandreturningyoutotheOptionsmenu.

TIPS, “TI P S ”

Thismodulefeatures“tipsforsuccessfulliving.”TipscanonlybeaccessedwhileinTimemode,bypressing(E).Thetipwillscroll(2)twotimes

beforerevertingbacktotheTimemodedisplay.Repeatedlypressing(E)willscrollthroughthetipsquicklyinterruptinganycurrentlyscrollingtip.

ThemodulesdefaulttipssettingisRandom,“Rndm,”howeverthereare(2)alternatesettings,AllandTop10.

RANDOM TIPS, “Rndm”

Thissettingrandomlyselectsadifferenttipfromthelist,witheverypressofthe(E)buttonwhileinTimemode.

ALL TIPS, “All”

Thissettingdisplaysthetipsinnumericalorderfromthelist,witheverypressofthe(E)buttonwhileinTimemode.

TOP 10 TIPS, “Top10”

Thissettingallowsyoutochooseupto10ofyourfavoritetipsandonlyselectfromthatlistandintheorderthatyousetthemwitheverypressofthe(E)buttonwhilein

Timemode.

SETTING TIPS

1. Press(B)tillOptionsiconisactivated.Presseither(D)or(E)till“Tips”ishighlighted,press(A)toselect.

(SeeFig.1)

2. Press(D)or(E)tohighlighteitherAll,RandomorTop10,“All,RndmorTop10”andpress(A)toselect.

SETTING TOP 10, “Top10”

1. TheTop10viewwilldisplaywiththefirstunderscoreflashing.

(SeeFig.2)

2. Pressing(D)willadvancetothe“next”Tipwhilepressing(E)willbringupthe“previous”Tip.

3. Press(A)toselectandadvancetothenextTipsetting.Thiscanberepeatedforupto10tips.AtthispointthefirstTipyousetwillappearagainblinkingonthedisplay

andyoumaygothroughandchangeanyoftheTipsettingsagainorpress(B)toEXITandreturntothe“All,RndmorTop10”menu.Pressing(B)againwilltakeyouback

totheOptionsmenu.

REMEMBER if you press and hold (B) at anytime during the above operation, any settings you have made will be saved and you will go back to TIME mode.

Figure 1

Figure 2

Alarm Weekday display

Alarms 1,2 display

3:00 Timer display

FREE Timer display

T1/T2view

Tmview

Basicview

Dt/Tmview

Basicview

Dt/Tmview

Figure 1

Figure 2

Figure 1

Figure 2

- 13 -

Digital FL075AB

DISPLAY MODES

Thedigitalportionofthemodulehas(3)threedisplayviewswhichareselectedbypressing(A).

1. WhileinTIMEview,whetherin12or24hourdisplayisirrelevant,press(A)onceandtheDATEviewwillappear.

2. TohavealternatingviewsbetweenTIMEandDATEpress(A)asecondtimeandeachviewwilldisplayfor1second.

3. ToreturntoTIMEonlyviewpress(A)forathirdtime.

SETTING TIME/DATE

1. Press(C)toenterSETmode.TheYEARwillbeginflashing,press(A)tochangetheyear.Thismodulefeaturesanauto

calendarfrom2000to2050.

2. Press(C)toadvancetotheMONTHsetting.Themonthwillbeginflashing,press(A)tochangethemonth.

3. Press(C)toadvancetotheDATEsetting.Thedaywillbeginflashing,press(A)tochangethedate.

4. Press(C)toadvancetothe12hr/24hrsetting.The12hcharacterswillbeginflashing,press(A)tochangeto24h.

5. Press(C)toadvancetotheHOURsetting.Thehourwillbeginflashing,press(A)tochangethehour.

6.Press(C)toadvancetotheMINUTEsetting.Theminutewillbeginflashing,press(A)tochangetheminute.

7. Press(C)toadvancetotheSECONDSreset.Thesecondswillbeginflashing,press(A)toresetto00.

8. Press(C)toexitSETmode.

SECOND

HOUR MINUTE

TIME DISPLAY MODE

SHOWING DATE

DAY

MONTH

DATE

Digital MLG367D, FL610AB

NORMAL TIME DISPLAY

1.PressAtochangemode.Modesequenceisnormaltime,alarm,timezone2,timer,

andchronograph.

2. PressBforEL.

NOTE: At any point in any setting mode, press D to exit setting mode.

NOTE: In any setting mode, if no pusher is operated for 2 minutes, all changes will be

saved and the setting will automatically return to display mode.

TIME AND CALENDAR SETTING

1. Innormaltimedisplay,pressD;secondswillbeginflashing.

2. PressCtosetsecondstozero.

3. PressAtoadvancetohour.

4. PressCtoadvancedigit,pressandholdCforfastadvance.

5. PressAtosetandadvancetonextsettingvalue.

6. Settingsequenceis:seconds,hour,minute,year,month,anddate.

7. PressDtoexitsettingmode.

NOTE: Weekday is automatically updated upon exiting setting mode.

NOTE: At any point in setting mode, press B to toggle 12/24 hour format.

ALARM MODE

1. PressAtochangetoalarmmode.

2. PressBtotogglealarm/chimeon/off.

3. Alarmwillsoundatpresettimefor20seconds;pressanypushertosilencealarm.

ALARM SETTING

1. PressAtochangetoalarmmode.

2. PressDtoentersettingmode;hourwillbeginflashing.

3. PressCtoadvancedigit;pressandholdCforfastadvance.

4. PressAtosetandadvancetonextsettingvalue.

5. Settingsequenceis:hour,minutes,month,date.Fordailyalarm,leavemonthanddateset

at“----“

6. PressDtoexitsettingmode.

TIME ZONE 2

1. PressAtochangetotimezone2.

NOTE: In time zone 2 display, normal time is shown in the upper portion of the display.

2. PressDtoentersettingmode;hourwillbeginflashing.

3. PressCtoadvancedigit,pressandholdCforfastadvance.

4. PressAtosetandadvancetominutes.

5. PressCtoadvancedigit,pressandholdCforfastadvance.

6. PressDtoexitsettingmode.

NOTE: At any point in setting mode, press B to toggle 12/24 hour format.

(B)

(D)

(A)

(C)

START/STOPLIGHT

LAP/RESETMODE

COUNTDOWN TIMER

1. PressAtochangetotimermode.

2. PressBtoclearcountdownandresettimer.

3. PressCtostart/stopthetimer.

TIMER SETTING

1. PressDtoentersettingmode;hourwillbeginflashing.

2. PressCtoadvancedigit;pressandholdCforfastadvance.

3. PressAtosetandadvancetonextsettingvalue.

4. Settingsequenceis:hour,minutes,seconds.

5. PressDtoexitsettingmode.

NOTE: At any point in setting mode, press B to toggle auto reset on/off. When auto

reset is on, timer will automatically re-start upon reaching zero.

CHRONOGRAPH MODE

1. PressAtochangetochronographmode.

2. PressCtostart/stopthechronograph.

3. PressBtoresettozero.

SPLIT TIME

1. PressBwhilethechronographisrunningforsplittime.

2. PressBagaintoreturntochronograph.

3. PressCtofinalizetiming.

4. PressBtoresettozero.

- 14 -

Digital QAA-006, QAA-033

NORMAL TIME DISPLAY

1. PressAforEL.

2. PressBtochangemode.Modesequenceistime,timezone2,alarm,timer.

NOTE: In any setting mode, if no pusher is operated for 10 seconds, all changes will

be saved and the setting will automatically return to display mode.

TIME AND DATE SETTING

1. PressandholdAfor3secondstoentersettingmode;12/24-hourformatwillbeginflashing.

2. PressBtochange12/24-hourformat.

3. PressAtosetandadvancetoseconds.

4. PressBtoresetsecondstozero.

5. PressAtosetandadvancetohour.

6. PressBtoincreasedigits;pressandholdBforfastadvance.

7. PressAtosetandadvancetonextsettingvalue.

8. Settingsequenceis12/24-hourformat,seconds,hour,minutes,year,month,date.

9. PressAtoexitsettingmode.

NOTE: Weekday will automatically update upon exiting setting mode.

TIME ZONE 2

1. PressBtochangetotimezone2.

2. PressandholdAfor3secondstoentersettingmode;hourwillbeginflashing.

3. PressBtoincreasedigit;pressandholdBforfastadvance.

4. PressAtosetandadvancetominutes.

5. PressBtoincreasedigit;pressandholdBforfastadvance.

6. PressAtoexitsettingmode.

ALARM MODE

1. PressBtochangetoalarmmode.

2. PressandholdBfor3secondstotogglealarm/chimeon/off.

3. Alarmwillsoundfor10seconds.Pressanypushertosilencealarm.

(A)

(B)

Digital G1, G3

NORMAL TIME DISPLAY

1. PressAtochangemode.Modesequenceisnormaltime,recall,alarm,andcountdowntimer.

2. PressandholdA3secondstotoggleautoELon/off.

3. PressBforEL.

4. PressCtotogglehourlychimeon/off.

5. PressDtoflashtimezone2.PressandholdD3secondstotogglenormaltimedisplay/time

zone2.

NOTE: In any mode, press and hold C 3 seconds to change to chronograph mode.

NOTE: At any point in any setting mode, press B to exit setting mode.

NOTE: In any setting mode, if no pusher is operated for 30 seconds, all changes will

be saved and the setting will automatically return to display mode.

TIME AND CALENDAR SETTING

1. Innormaltimedisplay,pressandholdB3seconds;hourwillbeginflashing.

2. PressCtoincreasedigit;pressDtodecreasedigit.PressandholdCorDforfast

increment/decrement.

3. PressAtosetandadvancetonextsettingvalue.

4. Repeatsteps2and3throughsettingsequence.Settingsequenceis:hour,minute,second,

year,month,date,12/24-hourformat,month/dateordate/monthformat.

5. PressBtoexitsettingmode.

6. TosetTimeZone2,pressandholdD3secondstochangetoTimeZone2.Thenusesteps

1-5toset.

NOTE: Weekday is automatically updated upon exiting setting mode.

RECALL MODE

1. PressAtochangetorecallmode.

NOTE: If no data is stored, display will show NO DATA. If data is saved, display will

show the current set (1-9).

2. PressCtotogglethroughsetdata:totaltime,besttime,averagetime,andeachlap(upto

100laps).

3. PressDtodisplaycurrentset;pressDagaintoscrolltonextset.

4. PressandholdD3secondstodeleteallstoreddatainthecurrentset.

NOTE: At any point in recall displays, press A to exit and change to alarm mode.

ALARM MODE

1. PressAtochangetoalarmmode.

2. PressCtotogglealarmon/off.

3. PressDtotogglealarm1/alarm2.

ALARM SETTING

1. Inalarmmode,pressandholdB3seconds;hourwillbeginflashing.

2. PressCtoincreasedigit;pressDtodecreasedigit.PressandholdCorDforfast

increment/decrement.

3. PressAtosetandadvancetonextsettingvalue.

4. Repeatsteps2and3throughsettingsequence.Settingsequenceis:hour,minute,timezone

1/timezone2.

5. PressBtoexitsettingmode.

NOTE: Alarm will sound for 20 seconds. Press any pusher to silence alarm.

(B)

(D)

(A)

(C)

COUNTDOWN TIMER

1. PressAtochangetotimermode.Defaultsettingis5minutes.

2. PressCtostarttimer;pressDtostopthetimer.

3. PressandholdD3secondstoclearthecountdownandresetthetimer.

NOTE: Alarm will sound for 20 seconds when countdown reaches zero. Press any

pusher to silence alarm.

TIMER SETTING

1. Intimermode,pressandholdB3secondstoentersettingmode;hourwillbeginflashing.

2. PressCtoincreasedigit;pressDtodecreasedigit.PressandholdCorDforfast

increment/decrement.

3. PressAtosetandadvancetonextsettingvalue.

4. Repeatsteps2and3throughsettingsequence.Settingsequenceis:hour,minute,seconds.

5. PressBtoexitsettingmode.

CHRONOGRAPH MODE

1. Inanymode,pressandholdC3secondstochangetochronographmode.

2. PressCtostartthechronograph;pressDtostopthechronograph.

3. PressandholdD3secondstoresettozero.

LAP COUNTING

1. PressCwhilethechronographisrunningforlapreading.

NOTE: If no other pusher is pressed after C is pressed, display will automatically show

total chronograph time after 5 seconds, then next lap running time after another 5

seconds.

2. PressBtoreturntochronographnextlap(upto100laps).

3. PressDtostopchronograph.

4. PressandholdB3secondstosavesetdata,orpressandholdD3secondstoresetto

zero.

NOTE: Upon saving, display will show next empty set available (1-9) or MEMORY

FULL. Change to Recall Mode to scroll through saved data.

ALARM SETTING

1. Inalarmmode,pressandholdAfor3secondstoentersettingmode;hourwillbegin

flashing.

2. PressBtoincreasedigit;pressandholdBforfastadvance.

3. PressAtosetandadvancetominute.

4. PressBtoincreasedigit;pressandholdBforfastadvance.

5. PressAtoexitsettingmode.

COUNTDOWN TIMER

1. PressBtochangetotimermode.

2. PressAtostart/stopthetimer.

3. Whentimerreacheszero,alarmwillsoundfor15seconds.Pressanypushertosilence

alarm.

TIMER SETTING

1. PressandholdAfor3secondstoentersettingmode;hourwillbeginflashing.

2. PressBtoincreasedigit;pressandholdBforfastadvance.

3. PressAtosetandadvancetonextsettingvalue.

4. Settingsequenceishour,minute,second.

5. PressAtoexitsettingmode.

- 15 -

MODE

SET/EL

MODE

START/STOP

LAP/RESET

REAL TIME

SET(holdfor

2seconds)

TOCHRONOGRAPH TOGGLETIME1/TIME2 KEYTONEON/OFF

TIME SETTING

EXIT NEXT ADVANCE DECREMENT

CHRONOGRAPH

MEMORYRECALL TOTIMER START/STOP LAP/RESET

MEMORY RECALL

NEXTLAP TOTIMER TOCHRONOGRAPH TOCHRONOGRAPH

TIMER

SET(holdfor

2seconds)

TOALARM START/STOP RESET

TIMER SETTING

EXIT NEXT ADVANCE DECREMENT

ALARM TIME

SET(holdfor

2seconds)

TOREALTIME NEXTALARM ALARMON/OFF

ALARM SETTING

EXIT NEXT ADVANCE DECREMENT

OVERVIEW

FeaturesincludeDUALTIME/DATE,CHRONO,TIMER,ALARM,andLIGHTUPEL.

LIGHT-UP EL

Press(A)toactivatelight-upfunctionfor3seconds.

TIME OF DAY MODE

- Press(C)totogglebetweenTime1andTime2.

- Hold(C)fortwosecondstosetTime1or2asdefault.

- Press(D)toturnon/offkeytone.

Time 1

- TosetTime,press(A)untilhourflashes.Press(B)toselectthesettingitem.Use(C)and(D)buttonstoadjustthevaluesupordown.Press(A)toexitsetmode.

Time 2

- TherangedifferencebetweenTime1andTime2is23hours.

CHRONO MODE

- Press(C)tostartandstopchronograph.

- Press(D)toSplit/Resetthechronograph.

- Press(A)torecallthememoryifChronographisstopped.

- Press(A)againtoviewthenextlap.

- Press(C)or(D)toexitRecallmodeandgobacktoChronographmode.

- Thereareatotalof10lapmemories.

TIMER MODE

- Thereare3differentmodesoftimer:CountDown-Stop,CountDown-Repeat,CountDown-andUp.

- Press(C)tostart/stopthetimercounting.

- Press(D)toresetthecountertothepresetvalueiftimerisstopped.

- Pressandhold(A)for2secondstoenterTimerSettingMode.

Timer Setting Mode

- Press(B)tocyclearoundthesettingitem:timer-type,hour,minute,secondandtobacktimer-typeagain.

- Press(C)and(D)toincrease/decreasethesettingvalue.

- Press(A)toexitthesettingmode.

Timer Alarm

- Timeralarmwillbeep2timesasecondfor30seconds.

ALARM MODE

- Press(C)toselectthealarm.

- Press(D)toenable/disablethealarm.

- Press(B)tochangetoTimemodeagain.

Alarm Setting Mode

- Pressandhold(A)for2secondstoenterthealarmsettingsmode.

- Press(C)and(D)toincreaseordecreasethesettingsvalue.

- Press(A)toexitthesettingsmode.

(A)

(D)

(B)

(C)

Alarmon

Hourlychimeon

AutomaticEL

Keytone

Chronograph

Countstop

Countrepeat

Countup

Digital MD-FL298X, FL388, QFL226DB

(A)

(D)

(B)

(C)

Digital FL145GR3

- 16 -

Digital ZD0603B01

NORMAL TIME DISPLAY

1. Innormaltimedisplay,thedisplayisoff.

2. Whenthedisplayisoff,pressAorBtoentertime/datemode.Arealtimedisplayscrollinganimationwillappearonthe

displayrst,andthenthetimedisplaywillbeshownfor1second.Followedbydatedisplayscrollinganimation,thedate

displaywillalsobeshownfor1second,andthenitwillautomaticallyshutoff.

TIME/DATE SETTING

1. PressandholdAtoentersettingmode;12/24hourformatselectionwillbeginashing.

2. PressAtoselect12/24hourformat.

3. PressBtosetandadvancetohour.

4. PressAtoadvancethesettingvalue.

5. PressBtosetandadvancetonextsetting.

6. Settingsequenceis:12/24hour,hour,minute,date,month,year.

7. Settingwillautomaticallyreturntotimedisplayafteryearisset.

NOTE: The weekday will automatically be updated when the date, month, and year are set.

(A) (B)

Digital FO-002

NORMAL TIME DISPLAY

1. PressBforEL.

2. PressCtodisplaydate.

3. PressDtodisplayalarm.

4. PressCandDtotogglealarmon/off.

willbedisplayedforalarmon.

5. PressAandDtotogglechimeon/off.Allweekdayswillbedisplayedforchimeon.

TIME/DATE SETTING

1. Fromnormaltimedisplay,pressA3timestoentersettingmode;secondswillbeginashing.

2. PressCtoresetsecondstozero.

3. PressDtoadvancetominutes.

4. PressCtoadvancesettingvalue.

5. PressDtosetandadvancetonextsetting.

6. Settingsequenceis:seconds,minutes,hour,day,month,andweekday.

NOTE: When setting the hour, “H” is displayed for 24 hour format; “A” or “P” for 12 hour format.

ALARM SETTING

1. Fromnormaltimedisplay,pressA2timestoentersettingmode;hourwillbeginashing.

2. PressCtoadjustsettingvalue.

3. PressDtosetandadvancetominutes.

4. PressCtoadjustsettingvalue.

5. PressAtoexitsettingmodeandreturntoNormalTimeDisplay.

NOTE: Alarm will sound for one minute. Press D to stop alarm sound; press C for 5 minute snooze.

CHRONOGRAPH

1. Fromnormaltimedisplay,pressA1timetoenterchronographmode.

2. PressCtostart/stopthechronograph.

3. PressDtoresettozero.

NOTE: While the chronograph is running, press A to return to Normal Time Display. Chronograph will continue

running in the background.

SPLIT TIME MEASUREMENT

1. PressDwhilethechronographisrunning.

2. PressCtonalizetimingandexitsplitcount.

3. PressDtodisplayallcounts.

4. PressDtoreset.

(A)

(D)

(B)

(C)

Digital MLL033

NORMAL TIME DISPLAY

1. PressAtodisplaymonthanddatefor3seconds.

2. PressAtwicetodisplayseconds;pressAagaintoreturntonormaltimedisplay.

TIME AND DATE SETTING

1. PressBtwice,todisplaymonth.

2. PressAtoadvancedigit.PressandholdAforfastadvance.

3. PressBtosetandadvancetonextsettingvalue.

4. Settingsequenceismonth,date,hour,minute.

5. PressBtoset.

6. PressAtoactivatewatch.Watchisactivatedwhencolonisflashing.

NOTE: To change from 12 to 24-hour format, when setting hour, scroll through all digits. 12-hour format is

indicated with “A” and “P”, and 24-hour format is indicated with “H”.

(A)

(B)

- 17 -

LED Digital MLG-035

NORMAL TIME DISPLAY

1. PressAtodisplaytimefor8seconds.

2. PressAagain(whiledisplayison)tochangemode.Modesequenceistime,date.

NOTE: Animation will be displayed before time or date for 2 seconds.

NOTE: If no pusher is operated for 8 seconds, settings will be saved and the display will return to normal time

display.

TIME SETTING

1. PressAtodisplaytime.

2. PressandholdB,12/24hourformatwillbeginflashing.

3. PressAtoselect12/24hourformat.

NOTE: In 12-hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m.

time.

4. PressBtosetandadvancetohour.

5. PressAtoadvancedigit;pressandholdAforfastadvance.

6. PressBtosetandadvancetonextsettingvalue.

7. Settingsequenceis:12/24hourformat,hour,minutes.

8. PressBtosaveandexitsettingmode.

DATE SETTING

1. PressAtoselectdatemode.

2. PressandholdB,datewillbeginflashing.

3. PressAtoadvancedigit;pressandholdAforfastadvance.

4. PressBtosetandadvancetomonth.

5. PressAtoadvancedigit;pressandholdAforfastadvance.

6. PressBtosaveandexitsettingmode.

(A)

(B)

OLED MODULE

Thedisplayisnormallyoff.Toactivatedisplay,pressAfordatedisplaywithscrollingtime(Figure1),orpressBfortime/date

displaywithanimation(Figure2).

NOTE: Animation is randomly selected from 4 designs. Press B to change animation.

TIME/DATE SETTING

1. Whenthedisplayisactivated,pressandholdAfor2secondstoentersettingmode.Hourwillbeginflashing.

2. PressBtoadvancedigit.PressandholdBforfastadvance.

3. PressAtosetandadvancetonextsettingvalue.

4. Settingsequenceishour,minute,month,date,year,12/24hourformat.

5. Aftertheminutehasbeenset,thesecondswillresettozero.

6. After12/24hourformathasbeenselected,settingswillbesavedandthedisplaywillautomaticallyreturntotimedisplay.

NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to time display.

(B)

(A)

Figure 1

Figure 2

(B)

(A)

Curved LED Digital MLL-045

NORMAL TIME DISPLAY

1. PressBfortimedisplayandanimation.

2. PressBagaintotoggletime/datemode.

3. Whentimeordateisdisplayed,pressandholdBfor3secondstotogglehorizontal/verticaldisplay.

TIME AND DATE SETTING

1. Fromtimedisplay,pressandholdA;12/24hourformatwillbeginflashing.

2. PressBtoselect12/24hourformat.

NOTE: In 12 hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m.

time.

3. PressAtosetandadvancetohour.

4. PressBtoadvancedigit.

5. PressAtosetandadvancetonextsettingvalue.

6. Settingsequenceis:12/24hourformat,hour,minutes,date,month.

7. PressAtosaveandexitsettingmode.

NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to normal time

display.

PERSONAL MESSAGE SETTING

1. PressBtodisplaytime,pressBagaintodisplaydate,pressandholdA;firstletterofmessagewillbeginflashing.

2. PressBtoselectcharacter.

3. PressAtosetandadvancetothenextcharacter.

4. Repeatstepsuntildesiredmessage.Pleasenotethereareonlytenspacesavailable.

(A)

(B)

- 18 -

Digital BJ3101

NORMAL TIME DISPLAY

1. PressAforEL.

2. PressAtodisplaydate.

TIME AND DATE SETTING

1. PressBtoentersettingmode;secondswillbeginflashing.

2. PressAtosetsecondstozeroandreturntonormaltimedisplay.

3. PressBtwicetosethour.

4. PressAtoincreasedigit;pressandholdAforfastadvance.

5. Settingsequenceishour,minutes,monthanddate.

6. PressBtoexitsettingmode.

(B)

(A)

CURVED LED QFL631

NORMAL TIME DISPLAY

1. PressBfortimedisplay.

2. PressBagainimmediatelyfordatedisplay.

3. Aftertimeordatedisplay,messagewillscroll.Displaywillautomaticallyturnoffaftermessagescrollingiscomplete.

TIME AND DATE SETTING

1. PressandholdAfor2secondstoentersettingmode;12/24-hourformatwillbeginflashing.

2. PressBtoselect12/24hourformat.

3. PressAtoadvancetohour.

4. PressBtoincreasedigits;pressandholdBforfastadvance.

5. PressAtoadvancetonextsettingvalue.

6. Settingsequenceis:12/24-hourformat,hour,minutes,year,month,date

7. PressAtosaveandexitsettingmode.

NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will automatically turn off.

MESSAGE SETTING

1. Incalendarmode,pressandholdAfor2secondstoentersettingmode;firstcharacterwillbeginflashing.

2. PressBtochangethecharacter.

3. PressAtoadvancetonextcharacter.

NOTE: Maximum message length is 10 characters.

(B)

(A)

Digital BJ2718, BJ2679, BJ2957

NORMAL TIME DISPLAY

1. PressAtochangemode.Modesequenceisnormaltime,chronograph,alarm,andtimesetting.

2. PressBforEL.

3. PressCtodisplaydate.

4. PressDtodisplayalarm.

5. PressA+Dtotogglechimeon/off.(alldaysofweekwilldisplayfor“on”.)

6. PressC+Dtotogglealarmon/off.

CHRONOGRAPH MODE

1. PressAtochangetochronographmode.

2. PressCtostart/stopthechronograph.

3. PressDtoresettozero.

NOTE: Press A while the chronograph is running to return to normal time display; chronograph will continue running.

SPLIT TIME

1. PressDwhilethechronographisrunningforsplittime.

2. PressDagaintomeasuremultiplesplittimes.

3. PressCtofinalizetiming.

4. PressDtoscrollthroughallcounts.

5. PressDagaintoresettozero.

ALARM SETTING

1. PressAtochangetoalarmsettingmode;hourwillbeginflashing.

2. PressCtoincreasedigit;pressandholdCforfastadvance.

3. PressDtoconfirm.

4. PressDagaintotoggletominutes.

5. PressCtoincreasedigit;pressandholdCforfastadvance.

6. PressAtosavedataandreturntonormaltimedisplay.

NOTE: Alarm will sound at preset time for 60 seconds. Press D to silence alarm, or press C for 5 minute snooze.

TIME AND CALENDAR SETTING

1. PressAtochangetotimeandcalendarsetting;secondswillbeginflashing.

2. PressCtosetsecondstozero.

3. PressDtoadvancetominutes.

4. PressCtoadvancedigit;pressandholdCforfastadvance.

5. PressDtoadvancetonextsettingvalue.

6. Settingsequenceis:seconds,minutes,hour,date,month,weekday.

7. PressDtoexitsettingmode.

NOTE: When setting the hour, “H” will be displayed for 24-hour format; “A” or “P” for 12-hour format.

(B)

(D)

(A)

(C)

(B) (D)

(A)

(C)

(B)

(D)

(A)

(C)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Diesel DZ7218 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Diesel DZ7218

Diesel DZ7218 User Manual - German - 18 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Diesel DZ7218 Manual

Product: