716642

Dickinson Marine Newport Manual

7
Zoom out
Zoom in
Previous page
1/41
Next page
www.dickinsonmarine.com ~ info@dickinsonmarine.com
Form#7.2-229 Issue#2
7
3. Competition for available air. Third, there must not be too much
competition from other devices in the boat, such as exhaust fans, a
large engine or air-exchange systems. If something else is sucking the
air out of the boat, the chimney might not be powerful enough to
overcome it, and exhaust might be drawn into the boat from the
chimney.
4. Proper chimney design. And finally, a chimney must be designed to
accommodate the volume and type of exhaust being emitted by the
appliances it serves. This involves correct sizing, adequate height, and
proper construction. See the “Chimney Pipe” section on pg. 9.
Since the chimney draft is affected by so many factors, draft problems
can be complicated to find.
Testing the Draft
To find where the air is being drawn, twist a paper towel into a wick, light it
and blow it out to create smoke. Placing the smoking wick near the open
hatches, windows or vents will lead you to the location. Installing or opening
opposing vents will allow the air to come in from a path of least resistance
and not disturb the draft in the chimney.
Downdraft
A common reason for downdraft is burning the heater too low (too much air
in the burner and not enough fuel). If the flames are burning below the top
burner ring and inside the burner pot then it is burning inefficiently causing
the draft to be too weak going up the chimney allowing downdraft down the
chimney. When the flames are burning above the top ring then the natural
draft is at its strongest so it can fight against downdraft.
5. Installing your Heater
Location
Plan your heaters location prior to installing to ensure the location chosen
will fit the specifications and safety clearances. Combustible material closer
to the heater then the specified safety clearances must be lined with
insulation or millboard and a metal liner with a .5” standoff for air
movement behind. Another alternative is using insulation or millboard and
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dickinson Marine Newport at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dickinson Marine Newport in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info