41
Connecting
the PC as a monitor
Connecting
the PC as a monitor
Setup
This function is to adjust picture to left/right and up/down
as you prefer.
1 Press the MENU button.
2 Select the Setup menu.
3 Press the CH
xx
/
CH
yy
button to select the desired item.
4 Press the
ÏÏqq
button to make desired adjustment.
5 Press the TV/AV button to exit menu
Auto
This function is for the automatic adjustment of the screen
position, clock and clock phase. The displayed image will
disappear for a few seconds while the Auto-configuration is in
process.
1 Press the MENU button.
2 Press the CH
xx
/
CH
yy
button to select the Auto.
Then press the
ÏÏqq
button.
H-Position (Horizontal Position)
This function is to adjust picture to left/right as you prefer.
V-Position(Vertical Position)
This function is to adjust picture to up/down as you prefer.
Phase
This function allows you to remove any horizontal noise and clear or sharpen the image of
characters.
Clock
This function is to minimize any vertical bars or stripes visible on the screen background.
And the horizontal screen size will also change.
Reset
This function allows you to return to the good picture reproduction programed at the factory and
cannot be changed.
This mediation range is different according to the supported resolution.
Note
Some signal from some graphics boards may not function properly.
If the results are unsatisfactory, adjust your monitor’s position, clock and clock
phase manually.
Note
