739133
7
Zoom out
Zoom in
Previous page
1/10
Next page
9 10
Start cleaning
Press the START button on the vacuum
cleaner or the ON/OFF button on the
remote control to start cleaning.
Before starting cleaning, make sure the
vacuum is not in sleeping mode. If yes,
press the START or ON/OFF button to wake
it up.
The START button doesn’t have light in
sleeping mode. It turns yellow in standby
mode and turns green when working.
Product Operation
Stop cleaning
When the vacuum cleaner is working, press the START or ON/OFF button to stop it.
After stopping it, the START button will turn yellow. And it will turn to sleeping
mode if there is no operation in 30 seconds.
Sleeping
When in sleeping mode, press the START or ON/OFF button can wake it up.
When in standby mode, long press the START button to turn to sleeping mode.
When in standby mode, the vacuum will turn to sleeping mode if there is no
operation in 30 seconds.
Product Operation
Cleaning Modes
Cleaning paths
This vacuum has several cleaning paths, which can automatically switch according
to different surface types.
The default mode when starting the vacuum is Auto mode. And it will switch the 4
cleaning paths automatically depending on different floor types.
Spot cleaning
In standby mode, press the button on the remote control and the vacuum will
turn to spot cleaning mode.
This mode is suitable for cleaning at a dirtier area. The vacuum will spiral intensively
until it finishes cleaning the dirty spot.
Scheduling
In standby mode, press the PLAN button to set the scheduling time
Once scheduled, the vacuum will clean at a certain time 7 days a week.
Recharging
When the battery is low, press the button on the vacuum or the button on
the remote control to make it go for recharging.
When it is working and the battery is low, the vacuum will automatically go back to
the charging base for recharging.
Auto cleaning path
Zig-zag cleaning path
Edge cleaning path
V cleaning path
Scheduling setting
Please use the remote control to set the scheduling. Once successfully scheduled, the
vacuum will clean at a certain time every day.
Before setting the time, make sure the START button is green. If the vacuum is in
standby mode, press the START button to wake it up first.
Set the clock time
Press the CLOCK button, and the
left 00 of the 00:00 will flash.
After finishing the setting, press
the CLOCK button to save the
setting.
Press the to set the hour and
minute, press the to change
between the hour and minute.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dibea GT9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dibea GT9 in the language / languages: English as an attachment in your email.

The manual is 7,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info