739142
7
Zoom out
Zoom in
Previous page
1/9
Next page
10 11
2
3
1、Remove the screws from the battery cover plate with a screwdriver.
2、Remove the battery cover and take out the battery.
3、Unplug the connector which connects the battery and the host.
4、Put the new battery into the battery jar.
5、Connect the battery to the connector of the host.
6、Put the battery cover back in its place.
7、 Lock the battery cover plate.
.
a
b
Product Operation Product Operation
Power connection.
After the charging base is powered on, the
indicator light shows "red".
Turn on the side power switch. "I" means power on
and "O" means power off.
It is recommended not to shut down the host after it
finishes working. Keep the host in the charging state
so that it can work better next time.
Put the host into the charging base, and pay
attention to align with the charging pole piece or
automatic recharging, as shown in figure a.
Or take the power adapter charging plug to directly
insert it into the host charging port, as shown in
figure b.
If the machine is being charged, the indicator light of the (START) key will flash.
If the charging is completed, the indicator light of the key START will turn green.
If the power is insufficient in standby mode, the indicator light of the (START) key will
turn red, and the machine will broadcast the voice "please charge". The machine will not
automatically look for a charging base for charging.
If the power is insufficient in working mode, the indicator light of the (START) key will turn
green, and the machine will broadcast the voice "please charge". The machine will not
automatically look for a charging base for charging.
Please charge the machine for 5 hours before use for the first time.
When the power is insufficient, please charge as soon as possible.
When the cleaning is finished or the power is too low, the machine will automatically start
looking for a charging base for charging.
If the machine is not used for a long time, please fully charge the battery and turn off the
power switch.
If the machine is not used for more than 3 months, please use the charger to charge it for 5
hours before use.
Before use, please put machine flat on the ground in the static state.
Turn on the power switch, short press START key of the host, making the machine enter the
automatic cleaning state.
After cleaning, the machine will look for the charging base automatically. If charging base is
found, the machine will enter the charging state; if not, the machine will enter standby state
or shutdown.
Short press (START) key under the dormant state to enter the standby state.
Short press (START) key under the standby state to enter the working state.
Short press (START) key under the working state to enter the standby state.
Long press (START) key for 5s under the standby state to enter the dormant state.
Do not install water tank and mop cloth when the
host is being charged.
For the first time, please fully charge it before use.
Open the host
Host charging
Notice:
Effective method to extend battery life
Battery removal and replacement
Quick operational guideline
Use of the host keys
Notice: Please do not use batteries that are not configured in this machine, otherwise the
machine will be damaged.
7


Need help? Post your question in this forum.

Forumrules
1

Forum

dibea-d500-pro

Reset search

  • What is the MAC address of my unit? I need this to register on my wifi. Submitted on 17-5-2021 at 19:32

    Reply Report abuse
  • I can’t connect the device to the Dibea app. It refers to an ‘intelligent distributions mode’ but. there are no instructions on how to enter that mode. Submitted on 17-5-2021 at 19:30

    Reply Report abuse
  • how do you know how much suction there is when there is when there is no readout on remote. Submitted on 21-1-2021 at 18:43

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dibea D500 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dibea D500 Pro in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info