739141
9
Zoom out
Zoom in
Previous page
1/12
Next page
14 15
1
Step 1:Download / install Dibea APP
Step 2: Log in Dibea APP
Step 3: Add the device "model"
Step 4: Start distribution network
Click "Start distribution network" button on the
Dibea APP interface.
Please download
the Dibea APP
Product Operation Product Operation
APP operation and use (with APP)
Intelligent distribution network:
Hotspot distribution network
Rapid networking
Before networking, please make preparation: Place the host and
charging base, and install the side brush.
It is suggested to scan the QR code in manual directly to install
APP (as shown in the figure), or the Apple users can search Dibea
in App Store to download, or the google play users can search
Dibea in google play to download.
Enter Dibea APP to log in (new users shall register an account
firstly).
Click "Add device " on the start menu
or "+" button on the upper right
corner, click all equipment to choose
"Machine model" to enter the
distribution network interface, as the
examples in figure below.
Turn on the host power switch, long press "START" key for about 3s under the standby state after
the machine is started, release the key when a prompt tone is heard and the yellow breathing light
of "START" flashes, then the machine enters the pre-distribution network mode.
After waiting for seconds, the machine makes prompt tone and the red breathing light of "START"
key flashes, the machine enters the intelligent distribution network.
Notice: Please ensure that your mobile phone has been accessed to the home Wi-Fi network
(only for 2.4G network)
Please put the machine at the position with strong Wi-Fi signal
for networking.
The first distribution network mode after machine start defaults
to be intelligent mode.
If APP prompts "connection time out" or "START" key of the host
shows purple light, it indicates the failure of Wi-Fi connection.
Repeat the step or choose the following hotspot distribution
network.
If you choose the hotspot distribution network, please set the host as the intelligent distribution
network ("START" key shows red breathing light) or ("START" key shows purple breathing light)
when the distribution network is failing under intelligent mode.
To enter the hotspot mode when the intelligent distribution network ("START" key shows red
light) needs the press of "START" key and the release. After the machine makes prompt tone
and the yellow breathing light of "START" key flashes, the machine will enter the pre-distribution
network mode.
After waiting for seconds, the machine makes prompt tone and the green breathing light of
"START" key flashes, the machine enters the hotspot distribution network.
To enter the hotspot mode when the intelligent distribution network is failing ("START" key shows
purple light) needs the long press of "START" key for about 3s. Release the key after the machine
makes prompt tone and the yellow breathing light of "START" key flashes, and the machine will
enter the pre-distribution network mode. After waiting for seconds, the machine makes prompt
tone and the green breathing light of "START" key flashes, the machine enters the hotspot
distribution network.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dibea D500-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dibea D500-A in the language / languages: English as an attachment in your email.

The manual is 8,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info