Manual Dexford WSRC 3000 (page 4 of 8) (English, German, French, Italian)

585339

Zoom out

Zoom in

1/8

3. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change the

minute setting. Press [ ALM SET ] button (3) to confirm.

4. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change the

year setting. Press [ ALM SET ] button (3) to confirm.

5. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to select

between the “month/date“ or “date/month“ setting. Press [ ALM

SET ] button (3) to confirm.

6. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change the

month setting. Press [ ALM SET ] button (3) to confirm.

7. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change the

date setting. Press [ ALM SET ] button (3) to confirm.

8. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to select

between “am/pm“ and “24-hour time“ clock setting. Press [ ALM

SET ] button (3) to confirm.

9. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change the

language setting. EN for English; GE for German; IT for Italian;

FR for French; NE for Dutch; ES for Spanish; DA for Danish.

Press [ MODE ] button (3) to confirm.

10. The display will no longer flash.

To see alarm time

1. Press [ MODE ] button (6) once and alarm time 1 will be shown

as indicated by A1.

2. Press [ MODE ] button (6) again and alarm time 2 will be shown

as indicated by A2.

3. Press [ MODE ] button (6) again and the current time will be

shown.

To set alarm time

1. Press [ MODE ] button (6) once and alarm time 1 will be shown

as indicated by A1.

2. Press and hold [ ALM SET ] button (3) for approximately 3 sec-

onds until A1 flashes.

3. Press [ -/RCC ] button (8) to change the hour setting.

4. Press [ ALM SET ] button (3) again.

5. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change the

minute setting.

6. Press [ ALM SET ] button (3) again.

7. When alarm time 1 [A1] is shown, press [ ALM SET ] button (3)

to turn ON and OFF the alarm. The symbol will be shown

when the alarm is on.

8. Press [ MODE ] button (6) again and alarm time 2 will be shown.

To set alarm time 2, follow the above instructions.

Press [ MODE ] button (6) again to see current time.

9. The symbol will be shown when alarm [A2] is on.

10. The alarm will sound for 120 seconds when the preset alarm

time is reached. Press any button at the back of the clock to de-

activate the alarm. The clock will automatically enter snooze

mode if the alarm is not deactivated.

11. Press the [ SNOOZE / LIGHT ] button (1) when the alarm is on,

to enter 'snooze' mode. The symbol will flash when the clock

is on 'snooze' mode. The alarm will sound again in 5 minutes.

Press any button at the back of the clock to de-activate the alarm.

12. Please note that alarm time setting ceases to function when the

clock is in RCC synchronisation mode. Wait until synchronisation

has ended before setting the alarm time.

Configuring the thermometer

The weather station is equipped to synchronise up to 3 remote tempera-

ture sensors. One remote temperature sensor is induded.

Additional remote temperature sensors are available for purchase sepa-

rately.

Remote temperature sensors

Back View Back view - open

1. Hole to hang the sensor

2. Battery compartment screws

3. "TX" button

4. "RESET" button

5. "Channel 1 2 3" switch

Batteries installation

1. Open battery compartment at the back of the unit by removing the

two small screws (2) with a Philips head screwdriver.

2. Install / replace with 2x "AAA" size batteries in the compartment.

It is recommended that only alkaline batteries are used. Do not use

rechargeable batteries.

3. The weather station is capable of receiving up to 3 different chan-

nels. Select the channel number (1, 2, or 3) by sliding the "Channel

1 2 3" switch (5). If you only have 1 remote temperature sensor,

select 1.

4. Press the "RESET" button (4) once and the red light will flash once.

5. Replace the battery compartment cover at the back of the unit by

tightening the two screws (2).

Installation

1. Place the remote temperature sensor at a desired place by mount-

ing the unit on a screw (screw not included) using the hole for

hanging (1). Alternatively, the unit can be placed on a flat horizontal

surface.

2. The unit can be placed indoor or outdoor. The unit is weatherproof.

Do not submerge unit in water. Do not expose unit to water for pro-

longed periods. Avoid accumulation of water and or snow on unit.

Avoid exposing unit to direct sunlight. Remove unit from the exterior

location in extreme or harsh weather conditions, including but not

limited to hurricane, typhoon, and cyclones seasons. Do not place

the unit in area of high winds.

3. Do not place the remote temperature sensor more than 30 meters

(98 feet) from the receiving weather station unit. The remote tem-

perature sensor is more effective if there are no obstructions and

interference between the remote temperature sensor and the

weather station. The remote temperature sensor might have to be

closer than 30 meters if the weather station is not able to receive

signals. This may be due to obstructions and / or interference. The

user might need to experiment with various locations to get the best

reception.

4. If there is a change in power source in the main unit (i.e. from bat-

teries to AC-DC adapter or vice versa), press "TX" button (3) on the

remote temperature sensors to reconfigure remote temperature

sensors.

Configuring weather station unit to receive remote temperature sig-

nals

1. Follow the above instructions to set up remote temperature sensor.

2. Press [ CHANNEL ] button (7) on weather station for 3 seconds.

The symbol will flash. This will reset all temperature memories.

3. The weather station will begin scanning for signals for channel 1.

As soon as signals are received from channel 1, the temperature

will be displayed. The weather station will automatically scan for

other channels. It will scan each channel for approximately 3 sec-

onds before skipping to the next channel.

4. Once all your channels are received by the unit, press [ CHANNEL ]

button (7) once to confirm the channel. The symbol will no

longer be displayed.

5. The weather station will receive a new signal automatically every 30

seconds to update the remote temperature.

6. Press [ CHANNEL ] button (7) on weather station repeatedly to

select between channel 1, channel 2 and channel 3.

7. The symbol will be displayed on the weather station unit if any of

the remote temperature sensor's batteries need replacing.

Temperature memory

Press [ MAX/MIN ] button (4) to display maximum recorded temperature,

minimum recorded temperature and current temparature. "max" indicates

maximum temperature. "min" indicates minimum temperature.

Temperature display

1. The "IN" temperature displays the indoor temperature. It is the tem-

perature of the current location of the weather station.

2. The "OUT" temperature displays the temperature of the remote

temperature sensors.

3. Press [ CHANNEL ] button (7) on weather station repeatedly to dis-

play the temperature of channel 1, channel 2, and channel 3.

Celsius / Fahrenheit

Press [ +/C/F ] button (4) to select between displaying the tempera-

ture in Celsius or Fahrenheit.

Temperature trend

1. Indicates the temperature trend is increasing.

2. Indicates there is a stable temperature trend.

3. Indicates the temperature trend is decreasing.

Warnings

• Do not subject the unit to excessive force, shock, dust, tempera-

ture or humidity.

• Do not immerse the unit in water.

• Do not remove any screws.

• Do not dispose this unit in a fire. IT MAY EXPLODE.

• Keep unit away from small children. The unit or parts of the unit

might be a choking hazard.

Specification

1. Indoor temperature range: -10°C - 70°C

2. Outdoor temperature range: -40°C -70°C

3. Barometeric pressure range: 900mb -1050mb.

4. Calendar range: year 2000 to year 2099

Disposal

You can help protect the environment! Please remember

to respect the local regulations: Hand in the non-working

electrical equipments to an appropriate waste disposal

center.

Hotline

In the event of technical problems, you can contact our hotline ser-

vice, Tel. 0900 00 1675 within Switzerland (cost via Swisscom at time

of going to print: CHF 2.60/min).

Conformity

This equipment complies with the European EMV directive. To

view the complete Declaration of Conformity, please refer to the

free download available at our web site: www.dexford.com

www.dexford.com V 1.0 / 27.06.2011

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dexford WSRC 3000 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dexford WSRC 3000 Manual

Product: