549675
23
Zoom out
Zoom in
Previous page
1/92
Next page
ENGLISH
21
Ensure the bracket, hose and adjustable strap are
completely secured to tool.
Attach Dust Extraction System to
Dust extractor (fi g. 1, 6, 7)
WARNING: Use only power tools
recommended by D
EWALT with this
attachment. For more information about
DEWALT power tools compatible with this
attachment, please contact your local dealer,
refer to the addresses at the back of the
manual or visit www.dewalt.eu.
Push recommended dust extractor hose nozzle
(i) into connection point (e) until tight. For a more
secure connection use the AirLock connector
system.
NOTE: Ensure hose connection is secure.
AIRLOCK CONNECTOR SYSTEM - DWV9000
(SOLD SEPARATELY)
AirLock allows for a fast and secure connection
between the drilling dust extraction system and the
dust extractor.
1. Ensure the collar (j) on the AirLock connector
(k) is in the unlock position. Align notches (n)
on collar and AirLock connector as shown for
unlock and lock positions.
2. Push the AirLock connector (k) onto the
connection point (e) of the dust extraction
system.
3. Rotate the collar (j) to the locked position.
NOTE: The ball bearings (m) inside collar will
lock into slot (l) and secure the connection.
The drilling dust extraction system is now securely
connected to the dust extractor.
OPERATION
Instructions for Use
WARNING: Always observe the safety
instructions and applicable regulations.
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories.
WARNING: Always read and operate
the tool as instructed in the tool
instruction manual.
1. Turn the dust extractor on as instructed in the
dust extractor instruction manual.
2. Switch on the tool as instructed in the tool
instruction manual.
MAINTENANCE
Your DEWALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing
set-ups or when making repairs.
Be sure the trigger switch is in the OFF
position. An accidental start-up can
cause injury.
TROUBLESHOOTING
FAULT POSSIBLE CAUSE REMEDY
Excessive
dust
emission
dust extractor
is full
empty the dust
extractor
filter of dust
extractor is
blocked
clean or replace
the filter
suction head is
defective
replace the suction
head
suction channel is
blocked
clean the suction
channel
dust extraction
system hose is
damaged
replace hose
chisel extends for
more than 60mm
adjust the air inlet
so chisel extends
25–60mm
Dust
extraction
system
falls off
adjustable strap is
loose
tighten the
adjustable strap
adjustable strap
damaged
replace adjustable
strap
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DWH052 T 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DWH052 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DWH052 T 1

DeWalt DWH052 T 1 Additional guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info