Manual DeWalt DWH051 T 1 (page 23 of 96) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

549674

Zoom out

Zoom in

1/96

ENGLISH

– Health hazards caused by breathing dust

developed when working in concrete and/or

masonry.

Markings on Dust Extraction System

The following pictograms are shown on the tool:

Read instruction manual before use..

Wear eye protection.

DATE CODE POSITION

The date code, which also includes the year of

manufacture, is printed on the main information

label.

Example:

2011 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Chipping dust extraction system

3 Dust shrouds

2 Tool holder adaptors

1 Kitbox

1 Instruction manual

• Check for damage to the tool, parts or

accessories which may have occurred

during transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. Dust extraction system

b. Adaptor 1

c. Adaptor 2

d. Latch

e. Dust shroud (long)

f. Dust shroud (medium)

g. Dust shroud (short)

h. Connection point

NOTE: To select the correct tool holder adaptor

reference the information label on the inside of the

kit box lid.

INTENDED USE

Your chipping dust extraction system has been

designed for professional chipping and chiselling

applications in concrete and masonry. Using the

appropriate hammer drill, chisel and dust extractor

it can be used to remove the vast majority of static

and airborne dust which without the use of the dust

extraction system could otherwise contaminate the

working environment or pose an increased health

risk to the operator and those in close proximity.

DO NOT use under wet conditions or in the

presence of flammable liquids or gases.

The chipping dust extraction system is a

professional tool.

DO NOT let children come into contact with the

tool. Supervision is required when inexperienced

operators use this tool.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-

ups or when making repairs. Be sure

the trigger switch is in the OFF position.

An accidental start-up can cause injury.

NOTICE: The chisel must not extend

more than 125 mm or less than 60mm

from the end of the dust shroud for

optimum performance (figure5).

NOTICE: Ensure the adaptor and all

surfaces are free from oil and grease.

The dust extractor will not fit securely

if parts are oily or greasy. Refer to

Cleaning paragraph.

Attach Dust Extraction System

(ﬁ g. 1–5)

NOTE: Remove chisels or accessories from tool.

1. Select the correct dust shroud (e, f, g)

depending on the length of the chisel (j) or

accessory to be used.

2. Fit the selected dust shroud (e, f, g) onto the

dust extraction system (a). Pull the lugs (k) to

attach and release dust shroud.

3. Select the correct adaptor (b, c). Push the

adaptor as far as it will go onto the tool

holder(l).

NOTE: To select the correct tool holder

adaptor reference the information label on the

inside of the kit box lid.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DWH051 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DWH051 T 1 Manual

Product: