546206
24
Zoom out
Zoom in
Previous page
1/105
Next page
19 en - 4
ENGLISH
Checking and changing the saw blade
Only saw blades conforming to the specifications
contained in these operating instructions may
be used.
Saw blades made of high alloy, high speed steel
(HSS steel) should not be used.
Only sharp saw blades in perfect working
condition should be used; cracked or bent
saw blades should be discarded and replaced
at once.
Ensure that the saw blade is securely fixed and
rotates in the correct direction.
Special applications
When cutting narrow workpieces
(width less than 80 mm) longitudinally,
use a rip fence guide along the longitudinal edge.
When sawing with the workpiece clamped tight,
devices should be used to prevent the workpiece
kicking back.
When sawing circular sections of wood use
a device to hold the workpiece steady on both
sides of the saw blade to prevent slipping.
Ensure that pieces of wood sawn off the
workpiece cannot be caught up by the teeth of
the saw blade and thrown in the air.
Guard against kickback
Kickback occurs when the saw begins to stall
rapidly and is driven back towards the operator.
Release the switch immediately if the blade sticks
or the saw stalls.
Keep the saw blades sharp.
Supports large panels near the cutting area.
Use a fence or straight edge guide when ripping;
do not force the tool.
Do not remove the saw from the work during
a cut while the saw blade is rotating.
Package contents
The package contains:
1 Cordless Trim Saw
1 Saw blade
1 Allen key
1 Parallel fence (DW936K2)
2 Battery Packs
1 Battery Charger
1 Kitbox
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or
accessories which may have occurred during
transport.
Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your DEWALT Cordless Trim Saw has been
designed for professional sawing applications.
1 ON/OFF-switch
2 Lock-off button
3 Front handle
4 Blade lock button
5 Dust spout
6 Bevel adjustment knob
7 Kerf indicator
8 Riving knife
9 Blade clamping screw
10 Lower guard
11 Lower guard retracting lever
12 Shoe
13 Depth adjustment knob
14 Parallel fence (DW936K2)
15 Battery pack
Charger
Your DEWALT 1 hour charger accepts DEWALT
battery packs ranging from 7.2 to 14.4 V
(DW935K2) or 7.2 to 18 V (DW936K2)
15 Battery pack
16 Release buttons
17 Charger
18 Charging indicator (red)
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
power corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your DEWALT charger is double
insulated in accordance with EN 50144.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW935K T 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW935K T 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info