Manual DeWalt DW876 (page 27 of 74) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546449

Zoom out

Zoom in

1/74

en - 3

ENGLISH

Package contents

The package contains:

1 Partly assembled machine

1 Table

1 Rip fence

1 Mitre fence

1 Box containing:

1 legstand (4 legs 530 mm, 2 traverse rails 480 mm, 2 traverse rails

360 mm, M5 x 16 bolts, M5 nuts and M5 washers for assembling

the legstand, M8 x 20 bolts and washers for mounting the machine

onto the legstand)

1 spanner 10/13 mm

1 Allen key 2.5 mm

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may have

occurred during transport.

• Take the time to thoroughly read and understand this manual prior to

operation.

• Remove the saw from the packaging material carefully.

• Study figure A to become familiar with the terminology used to

describe the various parts of the saw.

Description (fig. A)

Your DW876 bandsaw has been designed for professional workshop

applications: it performs straight, circular, mitre and bevel cuts. It can cut a

wide range of materials such as wood, plastics, non-ferrous metals and

leather.

1 ON/OFF-switch

2 Blade

3 Blade guard

4 Table

5 Rip fence

6 Mitre fence

7 Legstand

8 Blade tensioner

9 Door lock

10 Blade tension scale

11 Bevelling table support

12 Locking lever

13 Motor positioning bolt

14 Blade centring adjuster

15 Blade guard height adjuster

16 Dust extraction adapter

Electrical safety

The electric motor has been designed for one voltage only. Always check

that the power supply corresponds to the voltage on the rating plate.

Mains plug replacement (U.K. & Ireland only)

• Should your mains plug need replacing and you are competent to do

this, proceed as instructed below. If you are in doubt, contact an

authorized DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug with bared copper

conductors is dangerous if engaged in a live socket outlet.

• Only fit 13 Amperes BS1363A approved plugs fitted with the correctly

rated fuse (1).

• The cable wire colours, or a letter, will be marked at the connection

points of most good quality plugs. Attach the wires to their respective

points in the plug (see below). Brown is for Live (L) (2) and Blue is for

Neutral (N) (4).

• Before replacing the top cover of the mains plug ensure that the cable

restraint (3) is holding the outer sheath of the cable firmly and that the

two leads are correctly fixed at the terminal screws.

Never use a light socket.

Never connect the live (L) or neutral (N) wires to the earth pin

marked E or .

Using an extension cable

If an extension cable is required, use an approved extension cable suitable

for the power input of this tool (see technical data). The minimum

conductor size is 1.5 mm

When using a cable reel, always unwind the cable completely.

Also refer to the table below.

Conductor size (mm

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

220/240 0 - 2.0 6 6 6 6 6 6

2.1 - 3.4 6 6 6 6 6 6

3.5 - 5.0 6 6 6 6 10 15

5.1 - 7.0 10 10 10 10 15 15

7.1 - 12.0 15 15 15 15 20 20

12.1 - 20.0 20 20 20 20 25 -

Assembly and adjustment

Prior to assembly and adjustment always unplug the tool.

• The machine is fully assembled except for the legstand and table top.

Assembling the legstand (fig. B)

The legstand components and fasteners are packed separately.

• Assemble the legs and traverse rails using the nuts, bolts and washers

as shown. Do not yet tighten all the way.

• Ensure that the plastic feet are all facing downwards. The assembled

frame is shown in figure A.

• Place the machine on the legstand, making sure that the machine base

fits over the legstand on all four sides.

• Secure the machine to the legstand using the nuts, bolts and washers

supplied with the tool.

• Firmly tighten all the bolts.

The machine must be level and stable at all times.

Mounting the table top (fig. C)

• Make sure that the bevelling table support (11) is in horizontal position

and that the lever (12) is locked.

• With the scale (17) to the front, install the table top on the bevelling

table support (11) using the four bolts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW876 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW876 Manual

Product: