Manual DeWalt DW793 T 1 (page 15 of 93) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

549672

Zoom out

Zoom in

1/93

en - 4

ENGLISH

4. Use

Note:The flat folding filter must always remain

fitted in the suction unit.

The vacuum cleaner is not suited for sucking up

health-endangering dusts, such as asbestos.

The unit is electrically conductive. Accessories

must be antistatic for this to be effective.

The cleaner has 2 operating modes selectable

via a rotary switch.

Position 1

for dry suction and wet suction

Industrial vacuum cleaner mode (IS)

Position 2

for Automatic Mode via Socket

small vacuum extractor mode (EOB)

4.1 Automatic Mode via Socket

• When the cleaner is being used in con-

junction with an electric appliance, the latter

is plugged into the grounded outlet of the

cleaner, and the switch is set to position 2.

The cleaner is then automatically switched

on and off with the electrical appliance.

Note:The built-in electronic system has a start-

delay for the suction turbine of 0.5 s and a run-

on time of 15 s. Electrical appliances of 150-

2100 W can be connected.

Attention:

The unit must not be connected if the

connection piece diameter of the dust-ge-

nerating electric tool is larger than the dia-

meter of the suction hose.

Important note:

The unit does not have a low-voltage re-

lease for the integrated socket, therefore

always switch off the electric tool (operating

device) in order to prevent it from uninten-

tionally starting up when the extraction unit

is restarted. DANGER OF ACCIDENTS!

4.2 Dry suction

You can suck up dry dirt without any problem

both with and without a paper filter bag.

We recommend that you always use the paper

filter bag for sucking up fine dirt.

The paper filter bag gives you:

- significantly higher dust holding capacity.

- simple and hygienic dust disposal.

Operation with compressed-air operated

hand-controlled machines

• Rotary switch position 1

When switching on the unit, the dust extractor

must be switched on first, followed by the dust-

generating machine. When switching off the

unit, the sequence is carried out in reverse. The

minimum volumetric flow indicator is set during

automatic operation. If the volumetric flow drops

below the minimum, the signal lamp illuminates.

4.3 Wet suction

• Always work without a paper filter bag.

• Empty the dirt container to prevent sludge

formation.

• The suction unit switches off automatically

when the dirt container is full.

Note: After emptying, press the On/Off switch

twice.

Never suck up explosive liquids (e.g. pet-

rol,diesel fuel, heating oil), acids or sol-

vents!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW793 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW793 T 1 Manual

Product: