Manual DeWalt DW720K (page 32 of 144) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546503

Zoom out

Zoom in

1/144

en - 3 24

ENGLISH

These are:

- Impairment of hearing.

- Risk of accidents caused by the uncovered parts of the rotating saw

blade.

- Risk of injury when changing the blade.

- Risk of squeezing fingers when opening the guards.

- Health hazards caused by breathing dust developed when sawing

wood, especially oak, beech and MDF.

Package contents

The package contains:

1 Partly assembled machine

5 Table top sections

1 Fence

4 Table supports

1 Height adjustment crank

1 Motor, yoke and roller head assembly with no-volt release switch

1 Saw blade

1 Guard assembly

1 Dust extraction adapter

1 Set of parts for table extension:

8 M8 x 30 flat slotted head bolts

8 D8 Belleville washers

8 M8 nuts

8 D8 flat washers

2 Skinpacks containing:

1 multifunctional spanner

1 ring/open spanner

1 box spanner 13 mm

5 Allen keys (2.5, 3, 4, 5 & 8 mm)

1 cross head screw

4 M10 x 16 bolts

4 M10 nuts

4 D10 Belleville washers

6 M8 x 30 flat slotted head bolts

6 D8 Belleville washers

6 M8 nuts

6 D8 flat washers

1 cable clamp

1 cable support

2 table clamps

2 clamps for return spring

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may have

occurred during transport.

• Take the time to thoroughly read and understand this manual prior to

operation.

Description (fig. A1 & A2)

The DW720 Radial Arm Saw has been designed for the professional

woodworking industry. This high precision machine can be easily and

quickly set to crosscut, bevel, mitre, or rip. With the help of the wide

variety of accessories, your Radial Arm Saw will perform virtually all

workshop operations. For optimum safety, all major controls have both a

latch and a locking device. Also refer to the quick reference chart in this

manual.

1 ON/OFF-switch

2 Handle

3 Blade guard assembly

4 Fixed table top

5 Table extension

6 Fence

7 Table clamp

8 Column

9 Mitre latch lever

10 Mitre clamp lever

11 Height adjustment crank

12 Radial arm

13 End-cap

14 Yoke travel stop

15 Riplock

16 Yoke

17 Motor

18 Table strips

19 Bevel clamp lever

20 Bevel scale

21 Bevel latch

22 Roller head assembly

23 Cable support

Electrical safety

The electric motor has been designed for one voltage only. Always check

that the power supply corresponds to the voltage on the rating plate.

Mains plug replacement (U.K. & Ireland only)

• Should your mains plug need replacing and you are competent to do

this, proceed as instructed below. If you are in doubt, contact an

authorized DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug with bared copper

conductors is dangerous if engaged in a live socket outlet.

• Only fit 13 Amperes BS1363A approved plugs fitted with the correctly

rated fuse (1).

• The cable wire colours, or a letter, will be marked at the connection

points of most good quality plugs. Attach the wires to their respective

points in the plug (see below). Brown is for Live (L) (2) and Blue is for

Neutral (N) (4).

• Before replacing the top cover of the mains plug ensure that the cable

restraint (3) is holding the outer sheath of the cable firmly and that the

two leads are correctly fixed at the terminal screws.

Never use a light socket.

Never connect the live (L) or neutral (N) wires to the earth pin

marked E or .

For 115 V units with a power rating exceeding 1500 W, we recommend to

fit a plug to BS4343 standard.

Using an extension cable

If an extension cable is required, use an approved extension cable suitable

for the power input of this machine (see technical data).

The minimum conductor size is 1.5 mm

When using a cable reel, always unwind the cable completely.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW720K in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW720K Manual

Product: