Manual DeWalt DW718XPS T 2 (page 30 of 136) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546173

Zoom out

Zoom in

1/136

ENGLISH

• Connect the saw to a dust collection device when sawing wood.

Always consider factors which influence exposure of dust such as:

-– type of material to be machined (chip board produces more dust

than wood);

-– sharpness of the saw blade;

-– correct adjustment of the saw blade.

Ensure that the local extraction as well as hoods, baffles and chutes are

properly adjusted.

• Please be aware of the following factors influencing exposure

to noise:

-– use saw blades designed to reduce the emitted noise;

-– use only well sharpened saw blades;

• Machine maintenance shall be conducted periodically;

• Machine faults, including guards or saw blade, shall be reported as

soon as they are discovered;

• Provide adequate general or localized lighting;

• Ensure the operator is adequately trained in the use, adjustment and

operation of the machine;

• When fitted with laser, DO NOT change to a different type of laser.

Repairs shall only be carried out by the laser manufacturer or an

authorized agent.

Residual Risks

The following risks are inherent to the use of saws:

- injuries caused by touching the rotating parts

In spite of the application of the relevant safety regulations and the

implementation of safety devices, certain residual risks cannot be avoided.

These are:

- Impairment of hearing.

- Risk of accidents caused by the uncovered parts of the rotating saw blade.

- Risk of injury when changing the blade.

- Risk of squeezing ﬁ ngers when opening the guards.

- Health hazards caused by breathing dust developed when sawing

wood, especially oak, beech and MDF.

Package Contents

The package contains:

1 Assembled mitre saw

1 Blade spanner

1 Saw blade

1 Dustbag

1 Laser (DW718V)

1 LED Worklight System (DW718XPS)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may have

occurred during transport.

• Take the time to thoroughly read and understand this manual prior to

operation.

Description (ﬁ g A1 - A8)

Your DW718 mitre saw has been designed for professional cutting of wood,

wood products, aluminium and plastics. It will perform the sawing operations

of cross-cutting, bevelling and mitring easily, accurately and safely.

1 On/off switch

2 Moveable lower blade guard

3 Fence left-hand side

4 Mitre lever

5 Mitre latch

7 Mitre scale

8 Fence right-hand side

9 Kerf plate

10 Carrying handle

11 Operating handle

12 Head lock up release lever

13 Electronic speed control dial

14 Spindle lock

15 Bevel scale

16 Rail lock knob

17 Grooving stop

18 Dust spout

19 Fixed upper blade guard

20 Bevel latch/lever

21 Bevel clamp handle

22 Head lock down pin

23 Blade spanner

24 Hand indentation

25 Bench mounting holes

26 Dustbag

Optional accessories

27 Work support extension

28 Adjustable length stop

29 Work piece clamp

30 Laser

31 LED Worklight System

Electrical Safety

The electric motor has been designed for one voltage only. Always check

that the power supply corresponds to the voltage on the rating plate.

Your tool is double insulated in accordance with EN 61029;

therefore no earth wire is required.

In case of cord replacement the tool must only be repaired by an

authorized service agent or by qualiﬁ ed electrician.

Mains Plug Replacement

(U.K. & Ireland Only)

• Should your mains plug need replacing and you are competent to

do this, proceed as instructed below. If you are in doubt, contact an

authorized DEWALT repair agent or a qualiﬁ ed electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug with bared copper

conductors is dangerous if engaged in a live socket outlet.

• Only ﬁ t 13 Amperes BS1363A approved plugs ﬁ tted with the correctly

rated fuse (1).

• The cable wire colours, or a letter, will be marked at the connection

points of most good quality plugs. Attach the wires to their respective

points in the plug (see below). Brown is for Live (L) (2) and Blue is for

Neutral (N) (4).

• Before replacing the top cover of the mains plug ensure that the cable

restraint (3) is holding the outer sheath of the cable ﬁ rmly and that the

two leads are correctly ﬁ xed at the terminal screws.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW718XPS T 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW718XPS T 2 Manual

Product: