546162

DeWalt DW716EXPS T 2 Manual

14
Zoom out
Zoom in
Previous page
1/60
Next page
ENGLISH
12
Markings on Tool
Read instruction manual.
For indoor use.
Short-circuit-proof safety isolating
transformer.
DATE CODE POSITION
Date Code, which also includes the year of
manufacture, is printed on the inside of the
worklight. On the power supply, the date code is
located on the bottom.
Example:
2008 XX XX
Year of Manufacture
Installation of Miter Saw LED
Worklight System
WARNING: Read all instructions for the
Installation of Worklight Power Supply
and the Installation of Worklight before
proceeding with the Installation of the
Miter Saw Worklight System.
INSTALLATION OF THE WORKLIGHT POWER SUPPLY (WPS)
(FIG. 1–4)
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories.
WARNING: To reduce the risk of
serious personal injury, DO NOT
OPERATE SAW WITHOUT THE
COVER OR POWER SUPPLY IN
PLACE.
1. Remove the two screws from the miter saw
handle with the T20 wrench provided. Save the
screws to install the Worklight Power Supply
(WPS) in Step 4. Retain the handle cover for
future use if WPS is removed.
2. Attach the connections to the WPS (fig. 2).
3. Arrange the wire connection such that the wide
portion of the connector is placed against the
bottom of the miter saw handle and fit the WPS
to the handle (fig. 3).
4. Attach the WPS with the two screws removed
in Step 1 (fig. 4).
INSTALLATION OF THE WORKLIGHT (FIG. 5–8)
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories.
WARNING: To reduce the risk of
serious personal injury, DO NOT
OPERATE SAW WITHOUT THE
COVER OR WORKLIGHT IN PLACE.
WARNING: To reduce the risk of
serious personal injury, DO NOT
touch the sharp points on the blade
with fingers or hands when guard is
open.
1. Remove the four screws (a) with the the T20
wrench provided (fig. 5). Save the screws to
install the worklight in Step 4. Retain the cover
for future use if worklight is removed.
NOTE: Manually open the guard (b) if needed to
access and remove the lower two screws.
2. Attach the connection from lead wire to the
worklight (fig. 6).
3. Tuck the wire connection into the area in the
worklight as shown. Attach the worklight to
the saw (fig. 7).
4. Attach the worklight with the four screws
removed in Step 1. Tighten screws securely.
(fig. 8).
WARNING: Do not operate the miter
saw if any of the screws are missing,
stripped out or not seated.
5. Manually open and close the guard to ensure
no binding occurs. With the guard closed, move
the saw arm through a full stroke to also ensure
no guard binding occurs.
WARNING: To reduce the risk of
serious personal injury, do not
operate the saw if guard binding
occurs.
Use of Miter Saw Worklight System
(fi g. 9, 10)
WARNING: Read all instructions for the
Installation of Worklight Power Supply
and the Installation of Worklight before
using the Miter Saw Worklight System.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW716EXPS T 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW716EXPS T 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info