Manual DeWalt DW713XPS (page 14 of 60) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546155

Zoom out

Zoom in

1/60

ENGLISH

Markings on Tool

Read instruction manual.

For indoor use.

Short-circuit-proof safety isolating

transformer.

DATE CODE POSITION

Date Code, which also includes the year of

manufacture, is printed on the inside of the

worklight. On the power supply, the date code is

located on the bottom.

Example:

2008 XX XX

Year of Manufacture

Installation of Miter Saw LED

Worklight System

WARNING: Read all instructions for the

Installation of Worklight Power Supply

and the Installation of Worklight before

proceeding with the Installation of the

Miter Saw Worklight System.

INSTALLATION OF THE WORKLIGHT POWER SUPPLY (WPS)

(FIG. 1–4)

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories.

WARNING: To reduce the risk of

serious personal injury, DO NOT

OPERATE SAW WITHOUT THE

COVER OR POWER SUPPLY IN

PLACE.

1. Remove the two screws from the miter saw

handle with the T20 wrench provided. Save the

screws to install the Worklight Power Supply

(WPS) in Step 4. Retain the handle cover for

future use if WPS is removed.

2. Attach the connections to the WPS (fig. 2).

3. Arrange the wire connection such that the wide

portion of the connector is placed against the

bottom of the miter saw handle and fit the WPS

to the handle (fig. 3).

4. Attach the WPS with the two screws removed

in Step 1 (fig. 4).

INSTALLATION OF THE WORKLIGHT (FIG. 5–8)

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories.

WARNING: To reduce the risk of

serious personal injury, DO NOT

OPERATE SAW WITHOUT THE

COVER OR WORKLIGHT IN PLACE.

WARNING: To reduce the risk of

serious personal injury, DO NOT

touch the sharp points on the blade

with fingers or hands when guard is

open.

1. Remove the four screws (a) with the the T20

wrench provided (fig. 5). Save the screws to

install the worklight in Step 4. Retain the cover

for future use if worklight is removed.

NOTE: Manually open the guard (b) if needed to

access and remove the lower two screws.

2. Attach the connection from lead wire to the

worklight (fig. 6).

3. Tuck the wire connection into the area in the

worklight as shown. Attach the worklight to

the saw (fig. 7).

4. Attach the worklight with the four screws

removed in Step 1. Tighten screws securely.

(fig. 8).

WARNING: Do not operate the miter

saw if any of the screws are missing,

stripped out or not seated.

5. Manually open and close the guard to ensure

no binding occurs. With the guard closed, move

the saw arm through a full stroke to also ensure

no guard binding occurs.

WARNING: To reduce the risk of

serious personal injury, do not

operate the saw if guard binding

occurs.

Use of Miter Saw Worklight System

(ﬁ g. 9, 10)

WARNING: Read all instructions for the

Installation of Worklight Power Supply

and the Installation of Worklight before

using the Miter Saw Worklight System.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW713XPS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW713XPS Manual

Product: