546144

DeWalt DW712 T 5 Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
ENGLISH
8
MITRE SAW DW712, DW712N
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional power tool users.
Technical Data
DW712 DW712 DW712N DW712N
QS/CH LX QS/GB LX
Voltage V 230 _ 230 _
(UK & Ireland only) V 230/115 115 230/115 115
Type 5 5 3 3
Power output W 1600 1600 1600 1600
Current input (230V) A 8 8 8 8
Current input (115V) A 16 16 16 16
Blade diameter mm 216 216 216 216
Blade bore mm 30 30 30 30
Max. blade thickness mm 1.8 1.8 1.8 1.8
Blade speed min
-1
3500–4600 3500–4600 5400 5400
Max. crosscut capacity at 90/90° mm 300 x 70 300 x 70 300 x 70 300 x 70
Max. mitre cut capacity at 45˚ mm 212 212 212 212
Max. depth of cut 90˚ mm 70 70 70 70
Max. depth of bevel cross-cut 45˚ mm 50 50 50 50
Mitre (max. positions)
left 50˚ 50˚ 50˚ 50˚
right 60˚ 60˚ 60˚ 60˚
Bevel (max. positions)
left 48˚ 48˚ 48˚ 48˚
right 2˚ 2˚ 2˚ 2˚
0° mitre
Resulting width at
max. height 70 mm mm 300 300 300 300
Resulting height at
max. width 300 mm mm 70 70 70 70
45° mitre left
Resulting width at
max. height 70 mm mm 212 212 212 212
Resulting height at
max. width 212 mm mm 70 70 70 70
45° mitre right
Resulting width at
max. height 70 mm mm 212 212 212 212
Resulting height at
max. width 212 mm mm 70 70 70 70
45° bevel left
Resulting width at
max. height 50 mm mm 300 300 300 300
Resulting height at
max. width 300 mm mm 50 50 50 50
31.62° mitre, 33.85° bevel
Resulting height at
max. width 254 mm mm 65 65 65 65
Blade stopping time s < 10 < 10 < 10 < 10
Dust collection efficiency mg/m < 2.0 < 2.0 < 2.0 < 2.0
Weight kg 21 21 21 21
L
PA
(sound pressure) dB(A)
91 91
91 91
K
PA
(sound pressure uncertainty) dB(A)
3.0 3.0
3.0 3.0
L
WA
(sound power) dB(A)
104 104
104 104
K
WA
(sound power uncertainty) dB(A)
2.9 2.9
2.9 2.9
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a
h
=
m/s²
2.1 2.1
2.1 2.1
Uncertainty K = m/s²
1.5 1.5
1.5 1.5
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
FFuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
NOTE: This device is intended for the connection to a power supply
system with maximum permissible system impedance Zmax of 0.28 Ω
at the interface point (power service box) of user’s supply.
The user has to ensure that this device is connected only to a power
system which fulfils the requirement above. If necessary, the user can
ask the public power supply company for the system impedance at the
interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
DW712, DW712N
D
EWALT declares that these products described under technical data
are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-9.
These products also comply with Directive 2004/108/EC and 2011/65/
EU. For more information, please contact DEWALT at the following
address or refer to the back of the manual.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW712 T 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW712 T 5 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info