545014

DeWalt DW711 T 7 Manual

27
Zoom out
Zoom in
Previous page
1/124
Next page
ENGLISH
25
TABLE TOP MITRE SAW
DW711
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.30  at the
interface point (power service box) of user’s supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW711
DEWALT declares that these products described under Technical Data are
in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-11.
These products also comply with Directive 2004/108/EC and 2011/65/EU.
For more information, please contact DEWALT at the following address or
refer to the back of the manual.
Horst Grossmann
Vice President Engineering and Product Development
D
EWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
01.11.2011
Safety Instructions
WARNING! When using electric tools basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and personal injury including the following.
Read all these instructions before attempting to operate this product and
save these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product
development and innovation make D
EWALT one of the most reliable
partners for professional power tool users.
Technical Data
DW711 DW711-LX
Voltage V 230 _
(U.K. & Ireland only) V 230/115 115
Type 7 7
Power input W 1,300 1,100
Power output W 900 800
Max. blade speed min
-1
2 950 2 950
blade diameter mm 260 260
blade bore mm 30 30
Blade body thickness mm 2.0 2.0
Riving knife thickness mm 2.3 2.3
Riving knife hardness HRC 43 ±5 43 ±5
Weight kg 20 20
CUTTTING CAPACITIES
Mitre saw mode
Mitre (max. positions) left 50˚ 50˚
right 50˚ 50˚
Bevel (max. positions) left 48˚ 48˚
right 0˚ 0˚
At 90°, at max. height,
max. width of cut mm 134 x 50 134 x 50
At 45° mitre, at max. height,
max. width of cut mm 94 x 50 94 x 50
At 45° bevel, at max. height
max. crosscut mm 134 x 50 134 x 50
At 90˚, at max. depth of cut 96 mm, max width 20 mm, max. cut off 15 mm
Saw bench mode
Max. depth of cut mm 0-50 0-50
L
PA
(sound pressure) dB(A) 90 90
K
PA
(sound pressure uncertainty) dB(A) 3 3
L
WA
(sound power) dB(A) 103 103
K
WA
(sound power uncertainty) dB(A) 3.7 3.7
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a
h
=
m/s²
1.9 1.9
Uncertainty K = m/s²
1.5 1.5
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW711 T 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW711 T 7 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info