Manual DeWalt DW625E T 6 (page 32 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

546433

Zoom out

Zoom in

1/132

ENGLISH

Fine Adjustments (ﬁ g. 6)

When not using a depth template, or if the depth of

cut needs readjustment, it is recommended to use

the fine adjuster (q).

1. Adjust the depth of cut using the fine

adjuster (q).

2. Read the depth of cut using the measuring lens

(l) and scale (m).

3. Adapt the depth of cut to the millimeter using

the handwheel (k).

Depth Adjustment with the Router

Installed in Inverted Position (ﬁ g. 4)

1. Remove the cap nut (aa) and the knurled knob

(i) and replace it with the height adjusting tool

(DE6966) available as an option.

2. Screw the threaded end of the height adjusting

tool to the threaded spindle (g).

3. Set the depth of cut using the adjuster on the

height adjusting tool.

WARNING: For installing the router

in inverted position, refer to the relevant

instruction manual on the stationary tool.

Fitting the Parallel Fence (ﬁ g. 1A, 7)

1. Fit the guide rod (f) to the router base (u).

2. Slide the parallel fence (s) over the rods.

3. Tighten the locking bolts (e) temporarily.

Adjusting the Parallel Fence

(ﬁ g. 1A, 7)

1. Draw a cutting line on the material.

2. Lower the router carriage until the cutter is in

contact with the workpiece.

3. Tighten the plunge lock (n) and limit the carriage

return using the knurled nut (i).

4. Position the router on the cutting line.

5. Slide the parallel fence (s) against the workpiece

and tighten the locking bolts (e).

6. Adjust the parallel fence using the fine adjuster

(r). The outer cutting edge of the cutter must

coincide with the cutting line.

7. If required, loosen the screws (bb) and adjust

the strips (cc) to obtain the desired guiding

length.

Fitting the Baseplate Extension

(Option) (ﬁ g. 1B, 8)

1. Fit the baseplate extension (v) to the free end of

the guide rods.

2. Guide the tool with one hand on the knob (w)

and the other on the opposite grip (j).

Fitting a Guide Bush (ﬁ g. 9)

Together with a template, guide bushes play a

valuable part in cutting and shaping to a pattern.

• Fit the guide bush (ee) to the router base (u)

using the screws (ff) as shown.

Connecting a Dust Extractor

(ﬁ g. 1A, 10)

The dust extraction adaptor consists of a main

section (hh), a cover (ii), a hose guide (jj), two screws

(kk) and two nuts (ll).

1. Slide the cover (ii) onto the main section (hh)

and let it click into place.

2. Connect a dust extractor hose to the dust

extraction adaptor.

3. Loosen the screw in the top of the router and fit

the hose guide (jj) as shown.

Prior to Operation

1. Check that the cutter is correctly installed in the

collet.

2. Set the cutting depth.

3. Connect a dust extractor.

4. Make sure the plunge limiter is always locked

before switiching on.

OPERATION

Instructions for Use

WARNING: Always observe the safety

instructions and applicable regulations.

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW625E T 6 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 8,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW625E T 6 Manual

Product: