Manual DeWalt DW590EK (page 26 of 92) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544695

Zoom out

Zoom in

1/92

en - 5

ENGLISH

Also refer to the table below.

Conductor size (mm

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

115 0-2.0 66 66 610

2.1 - 3.4 6 6 6 6 15 15

3.5 - 5.0 6 6 10 15 20 20

5.1 - 7.0 10 10 15 20 20 25

7.1 - 12.0 15 15 20 25 25 -

12.1 - 20.0 20 20 25 - - -

230 0 - 2.0 6 6 6 6 6 6

2.1 - 3.4 6 6 6 6 6 6

3.5 - 5.0 6 6 6 6 10 15

5.1 - 7.0 10 10 10 10 15 15

7.1 - 12.0 15 15 15 15 20 20

12.1 - 20.0 20 20 20 20 25 -

Assembly and adjustment

Prior to assembly and adjustment always

unplug the tool.

Mounting and removing an accessory (fig. A)

This tool uses inner thread core bits and adaptors

which thread directly onto the spindle with a right-

hand thread.

Follow the core bit or manufacturer’s

recommendations for mounting the

accessory.

• Make sure the entire assembly is tight before

drilling.

Fitting the side handle (fig. B)

The side handle (5) can be fitted to suit both RH-

and LH-users.

Always use the Drill with the side handle

properly assembled.

• Twist the side handle to loosen it.

• For RH-users, slide the side handle clamp over

the 53 mm collar, handle at the left.

• For LH-users, slide the side handle clamp over

the 53 mm collar, handle at the right.

• Rotate the side handle to the desired position

and tighten the handle.

Two gear selector (fig. A & C)

The tool is fitted with a two gear selector (6).

• Release the switch and select the required position

after the motor has come to a complete standstill.

• Always align the selector with the arrow on the

gear housing:

o low speed

oo high speed

For speed rates, refer to the technical data.

Do not try to change gears when tool is

running.

Instructions for use

• Always observe the safety instructions

and applicable regulations.

• Be aware of the location of pipework and

wiring.

• Apply only a gentle pressure to the tool.

Excessive force does not speed up

drilling but decreases tool performance

and may shorten tool life.

Prior to operation:

• Mount the appropriate accessory.

• Mark the spot where the hole is to be drilled.

Switching ON and OFF (fig. A)

Variable speed switch

• To run the tool, press the variable speed switch.

The pressure exerted on the variable speed

switch determines the tool speed.

DW590K - Lock-on button (when rig-mounted)

• For continuous operation, press and hold down

the variable speed switch, press the lock-on

button (2) and release the switch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW590EK in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW590EK Manual

Product: