Manual DeWalt DW540 T 3 (page 24 of 91) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544677

Zoom out

Zoom in

1/91

ENGLISH

en - 5

Hammering only with spindle lock:

impacting only - for light chipping,

chiselling and demolition applications.

SDS-max

chisels can be locked into 8

different positions (also refer to fig. C):

• Rotate the mode selector (5) until it covers the

safety lock (16).

• Lock the chisel in the required position.

• Rotate the mode selector (5) until it points to the

-symbol.

In this mode the Rotary Hammer can also be

used as a lever to free a jammed drill bit.

• Select the required operating mode by rotating

the mode selector lever (5) over the safety lock

(16) until it points to the symbol.

Inserting and removing SDS-max

accessories

(fig. C)

These models use SDS-max

drill bits and chisels

(refer to the inset in fig. C for a cross-section of an

SDS-max

bit shank).

• Unplug the tool.

• Insert the bit shank into the tool holder locking

sleeve (6) and turn the bit slightly until the sleeve

snaps in position.

• Pull on the bit to check if it is properly locked.

The hammering function requires the bit to be

able to move axially several centimetres when

locked in the tool holder.

• To remove a bit pull back the tool holder locking

sleeve (6) and pull the bit out of the tool holder.

Assembling and fitting the side handle

The side handle (8) can be mounted in front or in

rear position on either side of the Rotary Hammer to

suit both RH- and LH-users.

Always operate the Rotary Hammer with

the side handle properly assembled.

Mounting in front position (fig. D)

• Unscrew the side handle (8) and disassemble the

side handle clamp (20).

• Snap the steel ring (17) over the collar (7) behind

the tool holder (6). Squeeze both ends together,

mount the bush (18) and insert the pin (19).

• Place the side handle clamp (20) and screw on

the clamp wheel (9). Do not tighten.

Conductor size (mm

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

115 0-2.0 66 66 610

2.1 - 3.4 6 6 6 6 15 15

3.5 - 5.0 6 6 10 15 20 20

5.1 - 7.0 10 10 15 20 20 25

7.1 - 12.0 15 15 20 25 25 -

12.1 - 20.0 20 20 25 - - -

220/240 0 - 2.0 6 6 6 6 6 6

2.1 - 3.4 6 6 6 6 6 6

3.5 - 5.0 6 6 6 6 10 15

5.1 - 7.0 10 10 10 10 15 15

7.1 - 12.0 15 15 15 15 20 20

12.1 - 20.0 20 20 20 20 25 -

Assembly and adjustment

Prior to assembly and adjustment always

unplug the tool.

DW541/DW545 - Setting the electronic speed

and impact control dial (fig. B)

• Turn the dial (2) to the desired level. The higher

the number, the greater the speed and impact

energy. With dial settings from “1” (low) to “7” (full

power) the tool is extremely versatile and

adaptable for many different applications. The

required setting is a matter of experience.

E.g. when using smaller diameter bits or when

drilling into ceramic or brittle materials, set the

dial to position “1” (low).

Selecting the operating mode (fig. B)

Your Rotary Hammer can be used in two operating

modes:

Hammer drilling:

simultaneous rotating and impacting - for

all concrete and masonry drilling

operations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW540 T 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW540 T 3 Manual

Product: