Manual DeWalt DW456 T 2 (page 18 of 82) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

548010

Zoom out

Zoom in

1/82

ENGLISH

en - 3

10 Secure workpiece

Use clamps or a vice to hold the workpiece. It is

safer and it frees both hands to operate the tool.

11 Do not overreach

Keep proper footing and balance at all times.

12 Avoid unintentional starting

Do not carry the plugged-in tool with a finger on

the switch. Be sure that the switch is released

when plugging in.

13 Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

14 Disconnect tool

Shut off power and wait for the tool to come to a

complete standstill before leaving it unattended.

Unplug the tool when not in use, before servicing

or changing accessories.

15 Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are

removed from the tool before operating the tool.

16 Use appropriate tool

The intended use is laid down in this instruction

manual. Do not force small tools or attachments

to do the job of a heavy-duty tool. The tool will

do the job better and safer at the rate for which it

was intended.

Warning! The use of any accessory or attachment

or performance of any operation with this tool, other

than those recommended in this instruction manual

may present a risk of personal injury.

17 Do not abuse cord

Never carry the tool by its cord or pull it to

disconnect from the socket. Keep the cord away

from heat, oil and sharp edges.

18 Maintain tools with care

Keep the tools in good condition and clean for

better and safer performance. Follow the

instructions for maintenance and changing

accessories. Inspect the tool cords at regular

intervals and, if damaged, have them repaired by

an authorized DEWALT repair agent. Inspect the

extension cords periodically and replace them if

damaged. Keep all controls dry, clean and free

from oil and grease.

19 Check for damaged parts

Before using the tool, carefully check it for damage

to ensure that it will operate properly and perform

its intended function. Check for misalignment and

seizure of moving parts, breakage of parts and any

other conditions that may affect its operation. Have

damaged guards or other defective parts repaired

or replaced as instructed. Do not use the tool if the

switch is defective. Have the switch replaced by an

authorized DEWALT repair agent.

20 Have your tool repaired by an authorized

DEWALT repair agent

This Power Tool is in accordance with the

relevant safety regulations. To avoid danger,

electric appliances must only be repaired by

qualified technicians.

Additional safety rules for Angle Grinders

• Your Angle Grinder has been designed for

grinding and cutting masonry and steel.

Do not cut or grind light metal with a

magnesium content exceeding 80%

since this type of metal is flammable.

• Do not use any accessories other than fibre

reinforced grinding wheels and cutting disks.

• Use the grinding wheels and cutting disks

recommended by the manufacturer only.

• The no-load speed of the grinding wheel or

cutting disk must not exceed the value printed on

the nameplate (instruction sheet).

• Do not cut workpieces requiring a maximum

depth of cut exceeding that of the cutting disk.

Package contents

The package contains:

1 Angle Grinder

1 Guard

1 Side handle

1 Grinding disk

1 Flange set

1 Two-pin spanner

1 Kitbox (K-models only)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW456 T 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW456 T 2 Manual

Product: