546187
21
Zoom out
Zoom in
Previous page
1/80
Next page
16 en - 5
ENGLISH
If the sanding frame is not being used, the
locking shaft (13) can be rotated a quarter
of a turn. It is not necessary to remove the
locking shaft because the crankshaft will
park inside the recess (11).
Mounting and removing the stationary stand
(fig. A & F)
With a stationary stand (option), the machine can be
used in a stationary position both upside down and
horizontally.
If required, mount the sanding frame (14) as
described above.
Place the belt sander on the stationary stand (18).
Guide the cord away at the side of the clamping
lever (12).
Place the fixing bolt (19) and tighten the round
nut (20) (see inset in figure F).
To remove the stationary stand, proceed in
reverse order.
Dust extraction (fig. A)
Since woodworking with a sander
produces dust, always install a dustbag
designed in compliance with the
applicable directives regarding dust
emission.
Do not use a dustbag or vacuum
extractor without proper spark protection
when sanding metal.
Do not sand magnesium!
Place the dustbag (7) over the flange (21) or
connect a vacuum extractor.
For efficient dust extraction empty the dustbag
when it is about one third full.
Remove the dustbag from the flange, open the
zipper and gently shake out the dustbag.
Instructions for use
Always observe the safety instructions
and applicable regulations.
Make sure all materials to be sanded are
well secured.
Apply only a gentle pressure to the
workpiece.
Switching on and off (fig. A)
Switching on: press the on/off-switch (1).
For continuous operation, also press the lock-on
button (3).
Switching off: press the on/off-switch again.
Always switch off the tool when work is
finished and before unplugging.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DEWALT Power Tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized DEWALT repair
agent where it will be disposed of in an
environmentally safe way.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW431 T 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW431 T 6 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info