Manual DeWalt DW423 T 4 (page 20 of 72) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546677

Zoom out

Zoom in

1/72

ENGLISH

en - 4 15

Never use a light socket.

Never connect the live (L) or neutral (N)

wires to the earth pin marked E or .

For 115 V units with a power rating exceeding 1500 W,

we recommend to fit a plug to BS4343 standard.

Using an extension cable

If an extension cable is required, use an approved

extension cable suitable for the power input of this

tool (see technical data). The minimum conductor

size is 1.5 mm

. When using a cable reel, always

unwind the cable completely.

Also refer to the table below.

Conductor size (mm

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

115 0-2.0 66 66 610

2.1 - 3.4 6 6 6 6 15 15

3.5 - 5.0 6 6 10 15 20 20

5.1 - 7.0 10 10 15 20 20 25

7.1 - 12.0 15 15 20 25 25 -

12.1 - 20.0 20 20 25 - - -

230 0 - 2.0 6 6 6 6 6 6

2.1 - 3.4 6 6 6 6 6 6

3.5 - 5.0 6 6 6 6 10 15

5.1 - 7.0 10 10 10 10 15 15

7.1 - 12.0 15 15 15 15 20 20

12.1 - 20.0 20 20 20 20 25 -

Assembly and adjustment

Prior to assembly and adjustment always

unplug the tool.

Fitting sanding discs (fig. B)

Your DEWALT palm grip sander uses 5" (126 mm)

Velcro sanding discs with an 8 hole dust extraction

pattern.

• Place the sander on a table, sanding pad (7) up.

• Place the sanding disc directly on top of the

sanding pad.

• Hold the sanding pad (7) with one hand and align

the dust extraction holes (9).

Electronic speed control dial (fig. C)

Your DEWALT palm grip sander is equipped with an

electronic speed control dial (2) with 5 positions.

Generally, harder materials require a higher setting.

The correct setting, however, is a matter of

experience.

Dust extraction

Since woodworking with a sander produces dust,

always install the dust collector or connect a

vacuum extractor designed in compliance with the

applicable Directives regarding dust emission.

Proper dust extraction will only be achieved with

perforated abrasive.

Do not use a dust collector or vacuum

extractor without proper spark protection

when sanding metal.

Do not sand magnesium!

Dust collector (fig. A & D)

Your DEWALT palm grip sander is equipped with a

dust collector (3).

• Attach the dust collector (3) with the vacuum

extractor adaptor (4) to the spout (5).

• For efficient dust extraction empty the dust

collector when it is about one third full.

• To empty the dust collector, pull it off together

with the adaptor (4) and separate both parts.

• Gently empty the dust collector (3) and shake out

the adaptor (4).

• If necessary, use a vacuum extractor to clean the

dust collector, applying suction to the interior

surface.

Vacuum extractor (fig. D)

• Remove the dust collector (3) by rotating it and

pulling it firmly off the vacuum extractor adaptor (4).

• Attach the vacuum extractor hose to the vacuum

extractor adaptor (4).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW423 T 4 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW423 T 4 Manual

Product: