546630
24
Zoom out
Zoom in
Previous page
1/92
Next page
19
ENGLISH
Sawing in wood (fig. E)
Gently rock the tool as shown. This increases
performance and lifetime of the saw blades and
helps to remove sawdust.
When the tool is used indoor for extended
periods of time, it must be connected to a
suitable dust extractor. Use a dust extractor
designed in compliance with the applicable
Directives regarding dust emission.
Sawing in cellular concrete and thermal building
blocks (fig. A)
Cellular concrete and thermal building
blocks contain lime and quartz sand.
To guarantee optimum performance,
the saw blades, the bar and the saw
blade guide slot (12) must be thoroughly
cleaned after use.
Sawing in asbestos cement
When sawing asbestos cement
hazardous dust may be produced.
Follow the statutory guidelines and
observe the recommendations issued by
the asbestos cement manufacturers.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DEWALT Power Tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication (fig. F)
Lubricate the saw blades, the bar and the saw
blade guide slot upon cleaning.
Regularly apply oil in the oil holes on the bar.
If the tool will not be used for a long period of
time, coat the saw blades and fill the oil holes
with a little oil (e.g. machine oil).
en - 6
Let the tool run for a few seconds to enable the
oil to reach all parts. This protects the tool from
corrosion.
Cleaning
Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
Clean the bar with a mild soap and a slightly
damp cloth. Do not use petrol, turpentine, thinner
or similar products. Do not let liquids enter the
housing.
Regularly remove the saw blades after cutting
cellular concrete or thermal building blocks.
Thoroughly clean the saw blades and the bar.
To clean the saw blade guide slot use the
scraper supplied with the tool.
Unwanted tools and the environment
Take your tool to an authorized DEWALT repair
agent where it will be disposed of in an
environmentally safe way.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW391 T 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW391 T 4 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info