Manual DeWalt DW390L T 5 (page 23 of 92) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

546629

Zoom out

Zoom in

1/92

en - 5

ENGLISH

• Pull the saw blade out of the locking clip (15) and

take it out of the bar (6).

• Repeat this procedure for the other saw blade.

Fitting the saw blades (fig. D)

• Slide one saw blade into the bar (6) making sure

its slotted hole (16) fits into the locking clip (15).

• Insert the back of the saw blade into the housing

(10) until the threaded hole (14) lodges in the

required mounting position.

• Repeat this procedure for the other saw blade.

• Using a piece of wood push on the toothed side

of the saw blades to make sure that they are

exactly parallel to the bar (6).

• Tighten both saw blade fixing screws (8) securely

by pressing and turning simultaneously with the

short end of the Allen key (9).

Before operation let the saw blades run

freely for approx. 20 s.

Saw blades

material recommended saw blade

hardwood, softwood, plywood, general purpose

plasterboard and dry logs HSS saw blade

plywood, chipboard and MDF TCT saw blade

thermal building blocks TCT saw blade

Instructions for use

• Always observe the safety instructions

and applicable regulations.

• Ensure the material to be sawn is

secured in place.

• Apply only a gentle pressure to the tool

and do not exert side pressure on the

saw blade.

• Avoid overloading.

Prior to operation (fig. A):

• Remove the saw blade guard (7).

• Mount the appropriate type of saw blade.

• Check that the tool is running properly and can

perform all its functions. Make sure that the bar

(6) is still straight and the saw blades (5) and the

housing (10) are undamaged.

Switching ON and OFF (fig. A)

DW390

For safety reasons the ON/OFF-switch (1) is

equipped with a lock-off button (2).

• Press the lock-off button (2) to unlock the tool.

• To run the tool, press the ON/OFF-switch (1).

As soon as the ON/OFF-switch is released the

lock-off switch is automatically activated to

prevent unintended starting.

• Always switch off the tool before unplugging.

DW391

For safety reasons the variable speed switch (1) is

equipped with a lock-off button (2).

• Press the lock-off button (2) to unlock the tool.

• To run the tool, press the variable speed switch

(1). The pressure exerted on the switch

determines the tool speed. As soon as the

variable speed switch is released the lock-off

switch is automatically activated to prevent

unintended starting.

• Always switch off the tool before unplugging.

Sawing (fig. A, E & F)

• Clamp the workpiece on one side only to prevent

the bar from jamming in the workpiece. Should

this happen, ease open the cut with wedges to

relieve the strain on the blade. Do not try to

wrench the saw free.

• Hold your DEWALT Power Tool by the front (3)

and the side handle (4) to guide the saw properly.

• Do not use the saw for cutting curves or pockets.

Make sure the bar end protrudes from the

workpiece.

• For long, straight cuts first draw a line on the

workpiece and follow the line.

• Make downward cuts only. Avoid cutting earth as

this will blunt the saw blades very quickly.

• When using a saw horse always cut on the

outside of the saw horse arms.

• To increase performance and lifetime of the saw

blades regularly apply oil to the blades and in the

oil holes (11) (every 15-30 min.).

• Regularly check the saw blade fixing screws (8).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW390L T 5 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW390L T 5 Manual

Product: