Manual DeWalt DW340K (page 20 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546438

Zoom out

Zoom in

1/80

en - 3 16

ENGLISH

Check for misalignment and seizure of moving

parts, breakage of parts and any other conditions

that may affect its operation. Have damaged

guards or other defective parts repaired or

replaced as instructed. Do not use the tool if the

switch is defective. Have the switch replaced by

an authorized DEWALT repair agent.

20 Have your tool repaired by an authorized

DEWALT repair agent

This Power Tool is in accordance with the

relevant safety regulations. To avoid danger,

electric appliances must only be repaired by

qualified technicians.

Additional safety instructions for heatguns

General

• Do not place your hand over the air vents or

block the vents in any way.

• The nozzle and accesories of this tool become

extremely hot during use. Let these parts cool

down before touching.

• Always switch the tool off before putting it down.

• Do not leave the tool unattended while it is

switched on.

• A fire may arise if the appliance is not used with care.

• Heat may be conducted to combustible materials

that are out of sight. Do not use in a damp

atmosphere, where flammable gases may be

present or near combustible materials.

• Allow the tool to cool fully before storing.

• Ensure adequate ventilation as toxic fumes may

be produced.

• Do not use as a hairdryer.

• Do not obstruct either the air intake or nozzle

outlet, as this may cause excessive heat build up

resulting in damage to the tool.

• Do not direct the hot air blast at other people.

• Do not touch the metal nozzle as it becomes very

hot during use and remains hot for up to

30 minutes after use.

• Do not place the nozzle against anything while

using or immediately after use.

• Do not poke anything down the nozzle as it could

give you an electric shock. Do not look down the

nozzle while the unit is working because of the

high temperatures being produced.

• Do not allow paint to adhere to the nozzle or

scraper as it could ignite after some time.

Removing paint

• Do not use this tool to remove paint containing

lead. The peelings, residue and vapours of paint

may contain lead, which is poisonous.

Any pre-1960 building may have been painted in

the past with paint containing lead and covered

with additional layers of paint. Once deposited on

surfaces, hand to mouth contact can result in the

ingestion of lead. Exposure even to low levels of

lead can cause irreversible damage to the brain

and nervous system. Young and unborn children

are particularly vulnerable.

• When removing paint, ensure that the work area

is enclosed. Preferably wear a dust mask.

• Do not burn the paint. Use the scraper provided

and keep the nozzle at leat 25 mm away from the

painted surface. When working in a vertical

direction, work downwards to prevent paint from

falling into the tool and burning.

• Dispose of all paint debris safely and ensure that

the work area is thoroughly cleaned after

completing the work.

Package contents

The package contains:

1 Heatgun

1 Set of accessories

1 Kitbox

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your DEWALT heatgun DW340K has been designed

for stripping paint, soldering pipes, shrinking PVC,

welding and bending plastics as well as general

drying and thawing purposes.

1 On/off switch

2 Air vents

3 Stand locations

4 Air temperature adjustment knob

5 Nozzle

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW340K in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW340K Manual

Product: