Manual DeWalt DW322 (page 26 of 104) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

447095

Zoom out

Zoom in

1/104

en - 5 20

ENGLISH

DW321/DW323 - (fig. A & C)

The DEWALT tool-free system ensures quick and

easy changing of saw blades.

• Lift the rotating handle (11) and rotate it

counterclockwise to open the clamp.

• Insert the saw blade into the blade holder (9)

guiding the back of the blade into the groove of

the guide roller (7).

• Turn the rotating handle (11) clockwise until a

click is heard.

• Press the rotating handle down.

• To remove the saw blade proceed in reverse

order.

Setting the mitre angle (fig. D)

The adjustable shoe (6) allows cutting of LH and RH

mitre angles up to 45°. The 0° and 45° positions are

preset.

• Loosen the screw (14) using the Allen key (13)

provided.

• Slide the shoe (6) away from the saw blade.

• Tilt the shoe and set the desired mitre angle with

the help of the scale.

• For intermediate angles, slightly tighten the screw

(14) using the Allen key (13).

• Fine tune the mitre angle and tighten the screw (14).

• To secure the 0° and 45° positions, slide the

shoe back to the front position.

Adjusting the sawdust blower (fig. A)

The sawdust blower conducts an adjustable stream

of air to the saw blade to keep the workpiece clear

of sawdust during operation.

• Adjust the sawdust blower using the lever (10).

It has three levels:

Low

For working with metals, when using

coolants and lubricants and for use with

dust extraction.

Intermediate

For working with wood and similar

materials in low speed.

High

For working with wood and similar

materials in high speed.

Mounting the dust extraction adaptor (fig. E)

• Fit the dust extraction adaptor (5) into the socket.

• Introduce the end of the dust extraction hose into

the adaptor.

• Mount the chip extraction shroud (8) as shown.

• To remove the dust extraction adaptor, press the

lug (16) and pull the adaptor out.

When appropriate, connect a vacuum cleaner

designed in compliance with the applicable

directives regarding dust emission.

Do not use a vacuum cleaner without proper spark

protection when sawing metal.

Mounting and removing the anti-splinter shoe

insert (fig. F)

The anti-splinter shoe insert (17) which fits close to

the saw blade prevents splintering of the workpiece.

• Mount the anti-splinter shoe insert (17) into the

shoe as shown.

• To remove the anti-splinter shoe insert do the

above process in reverse order.

DW321/DW323 - Mounting and removing the

plastic anti-scratch shoe cover (fig. G)

The anti-scratch shoe cover (18) prevents damage

to the surface of (sensitive) workpieces.

• Click the cover onto the shoe as shown.

DW321/DW323 - Setting the electronic sawing

speed (fig. H)

The sawing speed varies with the pressure exerted

on the ON/OFF-switch (1).

• To preset the sawing speed, turn the control dial (2)

to the desired level. The higher the number, the

higher the sawing speed. The required setting

depends on the thickness and kind of material.

After using the tool for an extended

period on low speed settings, run it for

approx. 3 minutes on maximum no-load

speed.

Setting the pendulum stroke (fig. I)

The adjustable pendulum stroke guarantees a

perfect cutting speed for different materials.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW322 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW322 Manual

Product: