551277
25
Zoom out
Zoom in
Previous page
1/104
Next page
23
ENGLISH
WARNING: 115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen between
the primary and secondary winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
EWALT service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the
plug.
Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made
to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see technical data). The minimum conductor size
is 1 mm
2
; the maximum length is 30 m.
When using a cable reel, always unwind the cable
completely.
Assembly and Adjustment
WARNING: Prior to assembly and
adjustment always unplug the tool.
Fitting and Removing Sockets
Your DW292 impact wrench uses a 1/2" square
drive system with detent pin.
Your DW294 impact wrench uses a 3/4" square
drive system with detent pin.
Fitting Sockets ( g. B)
Align the hole (6) in the side of the socket with
the detent pin (5) on the anvil.
Push the socket (4) onto the anvil (3) until it
snaps into place. Tap it lightly if required.
Removing Sockets ( g. C)
Depress the detent pin (5) through the hole (6)
in the socket and pull the socket off the anvil.
Setting the Direction of Rotation ( g. D)
Select forward or reverse rotation using the
forward/reverse switch (2).
WARNING: Always wait until the motor
has come to a complete standstill
before changing the direction of
rotation.
OPERATION
Instructions for Use
WARNING:
Always observe the safety instructions
and applicable regulations.
WARNING: To reduce the risk of
serious personal injury, turn tool off
and disconnect tool from power
source before making any
adjustments or removing/installing
attachments or accessories.
Screwdriving or Nutsetting ( g. A)
Select the appropriate socket for the screw or
nut to be driven.
Select forward or reverse rotation as described
above.
Hold the tool in line with the fastener.
Proper Hand Position (fi g. A, E)
WARNING: To reduce the risk of
serious personal injury, ALWAYS use
proper hand position as shown.
WARNING: To reduce the risk of
serious personal injury, ALWAYS hold
securely in anticipation of a sudden
reaction.
Proper hand position requires one hand on the main
handle (8), as shown.
Switching On and Off ( g. A)
To run the tool, press the on/off switch (1).
To stop the tool, release the switch.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW292 T 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW292 T 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info